| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2ed980b7cd83a87dd76b05a4bca014ce@codeaurora.org>
Date: Tue, 26 Jun 2018 06:53:47 +0530
From: Balakrishna Godavarthi <bgodavar@...eaurora.org>
To: Matthias Kaehlcke <mka@...omium.org>
Cc: marcel@...tmann.org, johan.hedberg@...il.com,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-bluetooth@...r.kernel.org, rtatiya@...eaurora.org,
hemantg@...eaurora.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v8 3/7] Bluetooth: btqca: Redefine qca_uart_setup() to
generic function.
Hi Matthias,
On 2018-06-26 04:50, Matthias Kaehlcke wrote:
> On Mon, Jun 25, 2018 at 07:10:09PM +0530, Balakrishna Godavarthi wrote:
>> Redefinition of qca_uart_setup will help future Qualcomm Bluetooth
>> SoC, to use the same function instead of duplicating the function.
>> Added new arguments soc_type and soc_ver to the functions.
>>
>> These arguments will help to decide type of firmware files
>> to be loaded into Bluetooth chip.
>> soc_type holds the Bluetooth chip connected to APPS processor.
>> soc_ver holds the Bluetooth chip version.
>>
>> Signed-off-by: Balakrishna Godavarthi <bgodavar@...eaurora.org>
>> ---
>> Changes in v8:
>> * updated soc_type with enum.
>>
>> Changes in v7:
>> * initial patch
>> * redefined qca_uart_setup function to generic.
>> ---
>> drivers/bluetooth/btqca.c | 23 ++++++++++++-----------
>> drivers/bluetooth/btqca.h | 13 +++++++++++--
>> drivers/bluetooth/hci_qca.c | 3 ++-
>> 3 files changed, 25 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index c5cf9cab438a..3b25be1be19c 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -327,9 +327,9 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev,
>> const bdaddr_t *bdaddr)
>> }
>> EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>>
>> -int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
>> +int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> + enum qca_btsoc_type soc_type, u32 soc_ver)
>> {
>> - u32 rome_ver = 0;
>> struct rome_config config;
>> int err;
>>
>> @@ -337,19 +337,20 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate)
>>
>> config.user_baud_rate = baudrate;
>>
>> - /* Get QCA version information */
>> - err = qca_read_soc_version(hdev, &rome_ver);
>> - if (err < 0 || rome_ver == 0) {
>> - bt_dev_err(hdev, "QCA Failed to get version %d", err);
>> - return err;
>> + if (!soc_ver) {
>> + /* Get QCA version information */
>> + err = qca_read_soc_version(hdev, &soc_ver);
>> + if (err < 0 || soc_ver == 0) {
>> + bt_dev_err(hdev, "QCA Failed to get version (%d)", err);
>> + return err;
>> + }
>> + bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>> }
>
> I thought we agreed in the discussion on "[v7,4/8] Bluetooth: btqca:
> Redefine qca_uart_setup() to generic function" to call
> qca_read_soc_version() in common code. Did I misinterpret that?
>
[Bala]: After integrating wcn3990, calling qca_read_soc_version() in
qca_setup()
is not preferable. as we will have multiple common blocks of
code in qca_setup.
calling function to set an operator speed is required in the
both the if -else blcoks
code snippet: (this i copied from previous conversation, before this
patch series. so you may see a different function call)
static int qca_setup(struct hci_uart *hu)
{
...
qcadev = serdev_device_get_drvdata(hu->serdev);
/* Patch downloading has to be done without IBS mode */
clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
/* Setup initial baudrate */
qca_set_speed(hu, speed, QCA_INIT_SPEED);
if (qcadev->btsoc_type == QCA_WCN3990) {
bt_dev_dbg(hdev, "setting up wcn3990");
hci_uart_set_flow_control(hu, true);
ret = qca_send_vendor_cmd(hdev,
QCA_WCN3990_POWERON_PULSE);
if (ret) {
bt_dev_err(hdev, "failed to send power on
command");
return ret;
}
serdev_device_close(hu->serdev);
ret = serdev_device_open(hu->serdev);
if (ret) {
bt_dev_err(hdev, "failed to open port");
return ret;
}
msleep(100);
speed = qca_get_speed(hu, QCA_INIT_SPEED);
if (speed)
qca_set_speed(hu, speed, QCA_INIT_SPEED);
hci_uart_set_flow_control(hu, false);
} else {
bt_dev_info(hdev, "ROME setup");
/* Setup user speed if needed */
speed = qca_get_speed(hu, QCA_OPER_SPEED);
if (speed) {
ret = qca_set_speed(hu, speed, QCA_OPER_SPEED);
if (ret)
return ret;
qca_baudrate = qca_get_baudrate_value(speed);
}
}
ret = qca_read_soc_version(hdev, &soc_ver);
if (ret < 0 || soc_ver == 0) {
bt_dev_err(hdev, "Failed to get version %d", ret);
return ret;
}
bt_dev_info(hdev, "wcn3990 controller version 0x%08x", soc_ver);
if (qcadev->btsoc_type == QCA_WCN3990) {
hci_uart_set_flow_control(hu, true);
/* Setup user speed if needed */
speed = qca_get_speed(hu, QCA_OPER_SPEED);
if (speed) {
ret = qca_set_speed(hu, speed, QCA_OPER_SPEED);
if (ret)
return ret;
qca_baudrate = qca_get_baudrate_value(speed);
}
/* Setup patch / NVM configurations */
ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type,
soc_ver);
if (!ret) {
set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_debugfs_init(hdev);
} else if (ret == -ENOENT) {
/* No patch/nvm-config found, run with original
fw/config */
ret = 0;
} else if (ret == -EAGAIN) {
/*
...
}
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index 5c9851b11838..24d6667eecf1 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> ...
>> -static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate)
>> +static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> + enum qca_btsoc_type soc_type, u32 soc_ver);
>
> Remove trailing semicolon.
[Bala]: i didn't get you.
--
Regards
Balakrishna.
Powered by blists - more mailing lists