[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1529994128-26770-3-git-send-email-alanx.chiang@intel.com>
Date: Tue, 26 Jun 2018 14:22:08 +0800
From: alanx.chiang@...el.com
To: linux-i2c@...r.kernel.org
Cc: andy.yeh@...el.com, sakari.ailus@...ux.intel.com,
andriy.shevchenko@...el.com, rajmohan.mani@...el.com,
andy.shevchenko@...il.com, brgl@...ev.pl, robh+dt@...nel.org,
mark.rutland@....com, arnd@...db.de, gregkh@...uxfoundation.org,
linux-kernel@...r.kernel.org,
"alanx.chiang" <alanx.chiang@...el.com>
Subject: [PATCH v2 2/2] eeprom: at24: Add support for address-width property
From: "alanx.chiang" <alanx.chiang@...el.com>
Provide a flexible way to determine the addressing bits of eeprom.
Pass the addressing bits to driver through address-width property.
Signed-off-by: Alan Chiang <alanx.chiang@...el.com>
Signed-off-by: Andy Yeh <andy.yeh@...el.com>
---
since v1
-- Add a warn message for 8-bit addressing.
---
drivers/misc/eeprom/at24.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 0c125f2..231afcd 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -478,6 +478,22 @@ static void at24_properties_to_pdata(struct device *dev,
if (device_property_present(dev, "no-read-rollover"))
chip->flags |= AT24_FLAG_NO_RDROL;
+ err = device_property_read_u32(dev, "address-width", &val);
+ if (!err) {
+ switch (val) {
+ case 8:
+ chip->flags &= ~AT24_FLAG_ADDR16;
+ dev_warn(dev, "address-width is 8, clear the ADD16 bit\n");
+ break;
+ case 16:
+ chip->flags |= AT24_FLAG_ADDR16;
+ break;
+ default:
+ dev_warn(dev, "Bad \"address-width\" property: %u\n",
+ val);
+ }
+ }
+
err = device_property_read_u32(dev, "size", &val);
if (!err)
chip->byte_len = val;
--
2.7.4
Powered by blists - more mailing lists