[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <86h8lq6l1r.wl-marc.zyngier@arm.com>
Date: Tue, 26 Jun 2018 08:53:20 +0100
From: Marc Zyngier <marc.zyngier@....com>
To: Mars Cheng <mars.cheng@...iatek.com>
Cc: Matthias Brugger <matthias.bgg@...il.com>,
Rob Herring <robh+dt@...nel.org>,
CC Hwang <cc.hwang@...iatek.com>,
Loda Chou <loda.chou@...iatek.com>,
Miles Chen <miles.chen@...iatek.com>,
Jades Shih <jades.shih@...iatek.com>,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
My Chuang <my.chuang@...iatek.com>,
<linux-kernel@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<wsd_upstream@...iatek.com>, <linux-serial@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt6765 support
On Tue, 26 Jun 2018 03:04:06 +0100,
Mars Cheng <mars.cheng@...iatek.com> wrote:
>
> This adds basic chip support for MT6765 SoC.
>
> Signed-off-by: Mars Cheng <mars.cheng@...iatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt6765-evb.dts | 33 ++++++
> arch/arm64/boot/dts/mediatek/mt6765.dtsi | 158 +++++++++++++++++++++++++++
> 3 files changed, 192 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6765-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6765.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6765.dtsi b/arch/arm64/boot/dts/mediatek/mt6765.dtsi
> new file mode 100644
> index 0000000..ab34c0f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6765.dtsi
[...]
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
GICv3 doesn't encode the PPI affinity in its interrupt specifiers (or
at least not this way). Please drop it.
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + sysirq: intpol-controller@...00a80 {
> + compatible = "mediatek,mt6765-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200a80 0 0x50>;
> + };
> +
> + gic: interrupt-controller@...00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + #redistributor-regions = <1>;
A single redistributor is the default, and you don't need to specify
it in the DT.
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>, // distributor
> + <0 0x0c100000 0 0x200000>; // redistributor
How about the GICv2 compatibility regions, which are provided by the
CPUs at a fixed offset from PERIPHBASE? See the Cortex-A53 TRM for
detail, and please add the missing regions.
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
Thanks,
M.
--
Jazz is not dead, it just smell funny.
Powered by blists - more mailing lists