linux-kernel - [PATCH 3/3] crypto: stm32/crc - Add power management support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1530017566-14779-4-git-send-email-lionel.debieve@st.com>
Date:   Tue, 26 Jun 2018 14:52:46 +0200
From:   Lionel Debieve <lionel.debieve@...com>
To:     Herbert Xu <herbert@...dor.apana.org.au>,
        "David S . Miller" <davem@...emloft.net>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        "Alexandre Torgue" <alexandre.torgue@...com>,
        <linux-crypto@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
CC:     Benjamin Gaignard <benjamin.gaignard@...com>,
        Fabien Dessenne <fabien.dessenne@...com>,
        Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH 3/3] crypto: stm32/crc - Add power management support

Adding pm and pm_runtime support to STM32 CRC.

Signed-off-by: Lionel Debieve <lionel.debieve@...com>
---
 drivers/crypto/stm32/stm32_crc32.c | 62 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
index 8f09b84..04ba5e1 100644
--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -8,6 +8,7 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 #include <crypto/internal/hash.h>
 
@@ -32,6 +33,8 @@
 #define POLY_CRC32              0xEDB88320
 #define POLY_CRC32C             0x82F63B78
 
+#define CRC_AUTOSUSPEND_DELAY	50
+
 struct stm32_crc {
 	struct list_head list;
 	struct device    *dev;
@@ -106,6 +109,8 @@ static int stm32_crc_init(struct shash_desc *desc)
 	}
 	spin_unlock_bh(&crc_list.lock);
 
+	pm_runtime_get_sync(ctx->crc->dev);
+
 	/* Reset, set key, poly and configure in bit reverse mode */
 	writel_relaxed(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
 	writel_relaxed(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
@@ -115,6 +120,9 @@ static int stm32_crc_init(struct shash_desc *desc)
 	ctx->partial = readl_relaxed(ctx->crc->regs + CRC_DR);
 	ctx->crc->nb_pending_bytes = 0;
 
+	pm_runtime_mark_last_busy(ctx->crc->dev);
+	pm_runtime_put_autosuspend(ctx->crc->dev);
+
 	return 0;
 }
 
@@ -126,6 +134,8 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	u32 *d32;
 	unsigned int i;
 
+	pm_runtime_get_sync(crc->dev);
+
 	if (unlikely(crc->nb_pending_bytes)) {
 		while (crc->nb_pending_bytes != sizeof(u32) && length) {
 			/* Fill in pending data */
@@ -149,6 +159,9 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	/* Store partial result */
 	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
 
+	pm_runtime_mark_last_busy(crc->dev);
+	pm_runtime_put_autosuspend(crc->dev);
+
 	/* Check for pending data (non 32 bits) */
 	length &= 3;
 	if (likely(!length))
@@ -272,6 +285,13 @@ static int stm32_crc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_set_autosuspend_delay(dev, CRC_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	platform_set_drvdata(pdev, crc);
 
 	spin_lock(&crc_list.lock);
@@ -287,12 +307,18 @@ static int stm32_crc_probe(struct platform_device *pdev)
 
 	dev_info(dev, "Initialized\n");
 
+	pm_runtime_put_sync(dev);
+
 	return 0;
 }
 
 static int stm32_crc_remove(struct platform_device *pdev)
 {
 	struct stm32_crc *crc = platform_get_drvdata(pdev);
+	int ret = pm_runtime_get_sync(crc->dev);
+
+	if (ret < 0)
+		return ret;
 
 	spin_lock(&crc_list.lock);
 	list_del(&crc->list);
@@ -300,11 +326,46 @@ static int stm32_crc_remove(struct platform_device *pdev)
 
 	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
 
+	pm_runtime_disable(crc->dev);
+	pm_runtime_put_noidle(crc->dev);
+
 	clk_disable_unprepare(crc->clk);
 
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int stm32_crc_runtime_suspend(struct device *dev)
+{
+	struct stm32_crc *crc = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(crc->clk);
+
+	return 0;
+}
+
+static int stm32_crc_runtime_resume(struct device *dev)
+{
+	struct stm32_crc *crc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(crc->clk);
+	if (ret) {
+		dev_err(crc->dev, "Failed to prepare_enable clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops stm32_crc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(stm32_crc_runtime_suspend,
+			   stm32_crc_runtime_resume, NULL)
+};
+
 static const struct of_device_id stm32_dt_ids[] = {
 	{ .compatible = "st,stm32f7-crc", },
 	{},
@@ -316,6 +377,7 @@ static struct platform_driver stm32_crc_driver = {
 	.remove = stm32_crc_remove,
 	.driver = {
 		.name           = DRIVER_NAME,
+		.pm		= &stm32_crc_pm_ops,
 		.of_match_table = stm32_dt_ids,
 	},
 };
-- 
2.7.4