Message-ID: <ba0b41d7-0f17-1d0a-e414-90bdbf04d5fe@codeaurora.org>
Date:   Wed, 27 Jun 2018 12:05:18 +0530
From:   "Asutosh Das (asd)" <asutoshd@...eaurora.org>
To:     Sayali Lokhande <sayalil@...eaurora.org>, subhashj@...eaurora.org,
        cang@...eaurora.org, vivek.gautam@...eaurora.org,
        rnayak@...eaurora.org, vinholikatti@...il.com,
        jejb@...ux.vnet.ibm.com, martin.petersen@...cle.com,
        evgreen@...omium.org, riteshh@...eaurora.org
Cc:     linux-scsi@...r.kernel.org,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V4 2/3] scsi: ufs: Add ufs provisioning support

On 6/26/2018 9:33 AM, Sayali Lokhande wrote:
> A new api ufshcd_do_config_device() is added in driver
> to support UFS provisioning at runtime. Configfs support
> is added to trigger provisioning.
> Device and Unit descriptor configurable parameters are
> parsed from vendor specific provisioning data or file and
> passed via configfs node at runtime to provision ufs device.
> 
> Signed-off-by: Sayali Lokhande <sayalil@...eaurora.org>
> ---
>   drivers/scsi/ufs/ufs.h    |  28 +++++++
>   drivers/scsi/ufs/ufshcd.c | 198 ++++++++++++++++++++++++++++++++++++++++++++++
>   drivers/scsi/ufs/ufshcd.h |   2 +
>   3 files changed, 228 insertions(+)
> 
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index e15deb0..1f99904 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -333,6 +333,7 @@ enum {
>   	UFSHCD_AMP		= 3,
>   };
>   
> +#define UFS_BLOCK_SIZE	4096
>   #define POWER_DESC_MAX_SIZE			0x62
>   #define POWER_DESC_MAX_ACTV_ICC_LVLS		16
>   
> @@ -425,6 +426,33 @@ enum {
>   	MASK_TM_SERVICE_RESP		= 0xFF,
>   };
>   
> +struct ufs_unit_desc {
> +	u8     bLUEnable;              /* 1 for enabled LU */
> +	u8     bBootLunID;             /* 0 for using this LU for boot */
> +	u8     bLUWriteProtect;        /* 1 = power on WP, 2 = permanent WP */
> +	u8     bMemoryType;            /* 0 for enhanced memory type */
> +	u32    dNumAllocUnits;         /* Number of alloc unit for this LU */
> +	u8     bDataReliability;       /* 0 for reliable write support */
> +	u8     bLogicalBlockSize;      /* See section 13.2.3 of UFS standard */
> +	u8     bProvisioningType;      /* 0 for thin provisioning */
> +	u16    wContextCapabilities;   /* refer Unit Descriptor Description */
> +};
> +
> +struct ufs_config_descr {
> +	u8     bNumberLU;              /* Total number of active LUs */
> +	u8     bBootEnable;            /* enabling device for partial init */
> +	u8     bDescrAccessEn;         /* desc access during partial init */
> +	u8     bInitPowerMode;         /* Initial device power mode */
> +	u8     bHighPriorityLUN;       /* LUN of the high priority LU */
> +	u8     bSecureRemovalType;     /* Erase config for data removal */
> +	u8     bInitActiveICCLevel;    /* ICC level after reset */
> +	u16    wPeriodicRTCUpdate;     /* 0 to set a priodic RTC update rate */
> +	u32     bConfigDescrLock;      /* 1 to lock Configation Descriptor */
> +	u32    qVendorConfigCode;      /* Vendor specific configuration code */
> +	struct ufs_unit_desc unit[8];
> +	u8	lun_to_grow;
> +};
> +
>   /* Task management service response */
>   enum {
>   	UPIU_TASK_MANAGEMENT_FUNC_COMPL		= 0x00,
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 351f874..370a7c6 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -42,6 +42,7 @@
>   #include <linux/nls.h>
>   #include <linux/of.h>
>   #include <linux/bitfield.h>
> +#include <asm/unaligned.h>
>   #include "ufshcd.h"
>   #include "ufs_quirks.h"
>   #include "unipro.h"
> @@ -3063,6 +3064,14 @@ static inline int ufshcd_read_power_desc(struct ufs_hba *hba,
>   	return ufshcd_read_desc(hba, QUERY_DESC_IDN_POWER, 0, buf, size);
>   }
>   
> +static inline int ufshcd_read_geometry_desc(struct ufs_hba *hba,
> +					 u8 *buf,
> +					 u32 size)
> +{
> +	return ufshcd_read_desc(hba, QUERY_DESC_IDN_GEOMETRY, 0, buf, size);
> +}
> +
> +
>   static int ufshcd_read_device_desc(struct ufs_hba *hba, u8 *buf, u32 size)
>   {
>   	return ufshcd_read_desc(hba, QUERY_DESC_IDN_DEVICE, 0, buf, size);
> @@ -6363,6 +6372,195 @@ static int ufshcd_set_dev_ref_clk(struct ufs_hba *hba)
>   }
>   
>   /**
> + * ufshcd_do_config_device - API function for UFS provisioning
> + * hba: per-adapter instance
> + * Returns 0 for success, non-zero in case of failure.
> + */
> +int ufshcd_do_config_device(struct ufs_hba *hba)
> +{
> +	struct ufs_config_descr *cfg = &hba->cfgs;
> +	int buff_len = QUERY_DESC_CONFIGURATION_DEF_SIZE;
> +	u8 desc_buf[QUERY_DESC_CONFIGURATION_DEF_SIZE] = {0};
> +	int i, ret = 0;
> +	int lun_to_grow = -1;
> +	u64 qTotalRawDeviceCapacity;
> +	u16 wEnhanced1CapAdjFac, wEnhanced2CapAdjFac;
> +	u32 dEnhanced1MaxNAllocU, dEnhanced2MaxNAllocU;
> +	size_t alloc_units, units_to_create = 0;
> +	size_t capacity_to_alloc_factor;
> +	size_t enhanced1_units = 0, enhanced2_units = 0;
> +	size_t conversion_ratio = 1;
> +	u8 *pt;
> +	u32 blocks_per_alloc_unit = 1024;
> +	int geo_len = hba->desc_size.geom_desc;
> +	u8 geo_buf[hba->desc_size.geom_desc];
> +	unsigned int max_partitions = 8;
> +
> +	WARN_ON(!hba || !cfg);
There's no point of null checks here. It's being dereferenced at the 
declaration above.
Also, I think it should return -EINVAL if these're null.
> +
> +	pm_runtime_get_sync(hba->dev);
> +	scsi_block_requests(hba->host);
> +	if (ufshcd_wait_for_doorbell_clr(hba, U64_MAX)) {
> +		dev_err(hba->dev, "%s: Timed out waitig for DB to clear\n",
> +			__func__);
> +		ret = -EBUSY;
> +		goto out;
> +	}
> +
> +	ret = ufshcd_read_geometry_desc(hba, geo_buf, geo_len);
> +	if (ret) {
> +		dev_err(hba->dev, "%s: Failed getting geometry_desc %d\n",
> +			__func__, ret);
> +		goto out;
> +	}
> +
> +	/*
> +	 * Get Geomtric parameters like total configurable memory
> +	 * quantity (Offset 0x04 to 0x0b), Capacity Adjustment
> +	 * Factors (Offset 0x30, 0x31, 0x36, 0x37), Max allocation
> +	 * units (Offset 0x2c to 0x2f, 0x32 to 0x35) used to configure
> +	 * the device logical units.
> +	 */
> +	qTotalRawDeviceCapacity = get_unaligned_be64(&geo_buf[0x04]);
> +	wEnhanced1CapAdjFac = get_unaligned_be16(&geo_buf[0x30]);
> +	wEnhanced2CapAdjFac = get_unaligned_be16(&geo_buf[0x36]);
> +	dEnhanced1MaxNAllocU = get_unaligned_be32(&geo_buf[0x2c]);
> +	dEnhanced2MaxNAllocU = get_unaligned_be32(&geo_buf[0x32]);
> +
> +	capacity_to_alloc_factor =
> +		(blocks_per_alloc_unit * UFS_BLOCK_SIZE) / 512;
> +
> +	if (qTotalRawDeviceCapacity % capacity_to_alloc_factor != 0) {
> +		dev_err(hba->dev,
> +			"%s: Raw capacity(%llu) not multiple of alloc factor(%zu)\n",
> +			__func__, qTotalRawDeviceCapacity,
> +			capacity_to_alloc_factor);
> +		ret = -EINVAL;
> +		goto out;
> +	}
> +	alloc_units = (qTotalRawDeviceCapacity / capacity_to_alloc_factor);
> +	units_to_create = 0;
> +	enhanced1_units = enhanced2_units = 0;
> +
> +	/*
> +	 * Calculate number of allocation units to be assigned to a logical unit
> +	 * considering the capacity adjustment factor of respective memory type.
> +	 */
> +	for (i = 0; i < (max_partitions - 1) &&
> +		units_to_create <= alloc_units; i++) {
> +		if ((cfg->unit[i].dNumAllocUnits % blocks_per_alloc_unit) == 0)
> +			cfg->unit[i].dNumAllocUnits /= blocks_per_alloc_unit;
> +		else
> +			cfg->unit[i].dNumAllocUnits =
> +			cfg->unit[i].dNumAllocUnits / blocks_per_alloc_unit + 1;
> +
> +		if (cfg->unit[i].bMemoryType == 0)
> +			units_to_create += cfg->unit[i].dNumAllocUnits;
> +		else if (cfg->unit[i].bMemoryType == 3) {
> +			enhanced1_units += cfg->unit[i].dNumAllocUnits;
> +			cfg->unit[i].dNumAllocUnits *=
> +				(wEnhanced1CapAdjFac / 0x100);
> +			units_to_create += cfg->unit[i].dNumAllocUnits;
> +		} else if (cfg->unit[i].bMemoryType == 4) {
> +			enhanced2_units += cfg->unit[i].dNumAllocUnits;
> +			cfg->unit[i].dNumAllocUnits *=
> +				(wEnhanced1CapAdjFac / 0x100);
> +			units_to_create += cfg->unit[i].dNumAllocUnits;
> +		} else {
> +			dev_err(hba->dev, "%s: Unsupported memory type %d\n",
> +				__func__, cfg->unit[i].bMemoryType);
> +			ret = -EINVAL;
> +			goto out;
> +		}
> +	}
> +	if (enhanced1_units > dEnhanced1MaxNAllocU) {
> +		dev_err(hba->dev, "%s: size %zu exceeds max enhanced1 area size %u\n",
> +			__func__, enhanced1_units, dEnhanced1MaxNAllocU);
> +		ret = -ERANGE;
> +		goto out;
> +	}
> +	if (enhanced2_units > dEnhanced2MaxNAllocU) {
> +		dev_err(hba->dev, "%s: size %zu exceeds max enhanced2 area size %u\n",
> +			__func__, enhanced2_units, dEnhanced2MaxNAllocU);
> +		ret = -ERANGE;
> +		goto out;
> +	}
> +	if (units_to_create > alloc_units) {
> +		dev_err(hba->dev, "%s: Specified size %zu exceeds device size %zu\n",
> +			__func__, units_to_create, alloc_units);
> +		ret = -ERANGE;
> +		goto out;
> +	}
> +	lun_to_grow = cfg->lun_to_grow;
> +	if (lun_to_grow != -1) {
> +		if (cfg->unit[i].bMemoryType == 0)
> +			conversion_ratio = 1;
> +		else if (cfg->unit[i].bMemoryType == 3)
> +			conversion_ratio = (wEnhanced1CapAdjFac / 0x100);
> +		else if (cfg->unit[i].bMemoryType == 4)
> +			conversion_ratio = (wEnhanced2CapAdjFac / 0x100);
> +
> +		cfg->unit[lun_to_grow].dNumAllocUnits +=
> +		((alloc_units - units_to_create) / conversion_ratio);
> +		dev_dbg(hba->dev, "%s: conversion_ratio %zu for lun %d\n",
> +			__func__, conversion_ratio, i);
> +	}
> +
> +	/* Fill in the buffer with configuration data */
> +	pt = desc_buf;
> +	*pt++ = 0x90;        // bLength
> +	*pt++ = 0x01;        // bDescriptorType
> +	*pt++ = 0;           // Reserved in UFS2.0 and onward
> +	*pt++ = cfg->bBootEnable;
> +	*pt++ = cfg->bDescrAccessEn;
> +	*pt++ = cfg->bInitPowerMode;
> +	*pt++ = cfg->bHighPriorityLUN;
> +	*pt++ = cfg->bSecureRemovalType;
> +	*pt++ = cfg->bInitActiveICCLevel;
> +	put_unaligned_be16(cfg->wPeriodicRTCUpdate, pt);
> +	pt = pt + 7; // Reserved fields set to 0
> +
> +	/* Fill in the buffer with per logical unit data */
> +	for (i = 0; i < UFS_UPIU_MAX_GENERAL_LUN; i++) {
> +		*pt++ = cfg->unit[i].bLUEnable;
> +		*pt++ = cfg->unit[i].bBootLunID;
> +		*pt++ = cfg->unit[i].bLUWriteProtect;
> +		*pt++ = cfg->unit[i].bMemoryType;
> +		put_unaligned_be32(cfg->unit[i].dNumAllocUnits, pt);
> +		pt = pt + 4;
> +		*pt++ = cfg->unit[i].bDataReliability;
> +		*pt++ = cfg->unit[i].bLogicalBlockSize;
> +		*pt++ = cfg->unit[i].bProvisioningType;
> +		put_unaligned_be16(cfg->unit[i].wContextCapabilities, pt);
> +		pt = pt + 5; // Reserved fields set to 0
> +	}
> +
> +	ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_WRITE_DESC,
> +		QUERY_DESC_IDN_CONFIGURATION, 0, 0, desc_buf, &buff_len);
> +
> +	if (ret) {
> +		dev_err(hba->dev, "%s: Failed writing descriptor. desc_idn %d, opcode %x ret %d\n",
> +		__func__, QUERY_DESC_IDN_CONFIGURATION,
> +		UPIU_QUERY_OPCODE_WRITE_DESC, ret);
> +		goto out;
> +	}
> +
> +	if (cfg->bConfigDescrLock == 1) {
> +		ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
> +		QUERY_ATTR_IDN_CONF_DESC_LOCK, 0, 0, &cfg->bConfigDescrLock);
> +		if (ret)
> +			dev_err(hba->dev, "%s: Failed writing bConfigDescrLock %d\n",
> +				__func__, ret);
> +	}
> +
> +out:
> +	scsi_unblock_requests(hba->host);
> +	pm_runtime_put_sync(hba->dev);
> +
> +	return ret;
> +}
> +
> +/**
>    * ufshcd_probe_hba - probe hba to detect device and initialize
>    * @hba: per-adapter instance
>    *
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 101a75c..0e6bf30 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -549,6 +549,7 @@ struct ufs_hba {
>   	unsigned int irq;
>   	bool is_irq_enabled;
>   	u32 dev_ref_clk_freq;
> +	struct ufs_config_descr cfgs;
>   
>   	/* Interrupt aggregation support is broken */
>   	#define UFSHCD_QUIRK_BROKEN_INTR_AGGR			0x1
> @@ -867,6 +868,7 @@ int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
>   
>   int ufshcd_hold(struct ufs_hba *hba, bool async);
>   void ufshcd_release(struct ufs_hba *hba);
> +int ufshcd_do_config_device(struct ufs_hba *hba);
>   
>   int ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
>   	int *desc_length);
> 


-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a 
Linux Foundation Collaborative Project

Powered by blists - more mailing lists