linux-kernel - Re: [PATCH 7/9] media: cedrus: Move IRQ maintainance to cedrus_dec

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180627175828.hvos5hxdk2cyvare@flea>
Date:   Wed, 27 Jun 2018 19:58:28 +0200
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Cc:     hans.verkuil@...co.com, acourbot@...omium.org,
        sakari.ailus@...ux.intel.com,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        tfiga@...omium.org, posciak@...omium.org,
        Chen-Yu Tsai <wens@...e.org>, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org,
        nicolas.dufresne@...labora.com, jenskuske@...il.com,
        linux-sunxi@...glegroups.com,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH 7/9] media: cedrus: Move IRQ maintainance to
 cedrus_dec_ops

On Mon, Jun 25, 2018 at 05:49:58PM +0200, Paul Kocialkowski wrote:
> On Mon, 2018-06-25 at 17:38 +0200, Paul Kocialkowski wrote:
> > Hi,
> > 
> > On Wed, 2018-06-13 at 16:07 +0200, Maxime Ripard wrote:
> > > The IRQ handler up until now was hardcoding the use of the MPEG engine to
> > > read the interrupt status, clear it and disable the interrupts.
> > > 
> > > Obviously, that won't work really well with the introduction of new codecs
> > > that use a separate engine with a separate register set.
> > > 
> > > In order to make this more future proof, introduce new decodec operations
> > > to deal with the interrupt management. The only one missing is the one to
> > > enable the interrupts in the first place, but that's taken care of by the
> > > trigger hook for now.
> > 
> > Here's another comment about an issue I just figured out.
> > 
> > > Signed-off-by: Maxime Ripard <maxime.ripard@...tlin.com>
> > > ---
> > >  .../sunxi/cedrus/sunxi_cedrus_common.h        |  9 +++++
> > >  .../platform/sunxi/cedrus/sunxi_cedrus_hw.c   | 21 ++++++------
> > >  .../sunxi/cedrus/sunxi_cedrus_mpeg2.c         | 33 +++++++++++++++++++
> > >  3 files changed, 53 insertions(+), 10 deletions(-)
> > > 
> > > diff --git a/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_common.h b/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_common.h
> > > index c2e2c92d103b..a2a507eb9fc9 100644
> > > --- a/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_common.h
> > > +++ b/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_common.h
> > > @@ -108,7 +108,16 @@ struct sunxi_cedrus_buffer *vb2_to_cedrus_buffer(const struct vb2_buffer *p)
> > >  	return vb2_v4l2_to_cedrus_buffer(to_vb2_v4l2_buffer(p));
> > >  }
> > >  
> > > +enum sunxi_cedrus_irq_status {
> > > +	SUNXI_CEDRUS_IRQ_NONE,
> > > +	SUNXI_CEDRUS_IRQ_ERROR,
> > > +	SUNXI_CEDRUS_IRQ_OK,
> > > +};
> > > +
> > >  struct sunxi_cedrus_dec_ops {
> > > +	void (*irq_clear)(struct sunxi_cedrus_ctx *ctx);
> > > +	void (*irq_disable)(struct sunxi_cedrus_ctx *ctx);
> > > +	enum sunxi_cedrus_irq_status (*irq_status)(struct sunxi_cedrus_ctx *ctx);
> > >  	void (*setup)(struct sunxi_cedrus_ctx *ctx,
> > >  		      struct sunxi_cedrus_run *run);
> > >  	void (*trigger)(struct sunxi_cedrus_ctx *ctx);
> > > diff --git a/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_hw.c b/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_hw.c
> > > index bb46a01214e0..6b97cbd2834e 100644
> > > --- a/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_hw.c
> > > +++ b/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_hw.c
> > > @@ -77,27 +77,28 @@ static irqreturn_t sunxi_cedrus_ve_irq(int irq, void *dev_id)
> > >  	struct sunxi_cedrus_ctx *ctx;
> > >  	struct sunxi_cedrus_buffer *src_buffer, *dst_buffer;
> > >  	struct vb2_v4l2_buffer *src_vb, *dst_vb;
> > > +	enum sunxi_cedrus_irq_status status;
> > >  	unsigned long flags;
> > > -	unsigned int value, status;
> > >  
> > >  	spin_lock_irqsave(&dev->irq_lock, flags);
> > >  
> > > -	/* Disable MPEG interrupts and stop the MPEG engine */
> > > -	value = sunxi_cedrus_read(dev, VE_MPEG_CTRL);
> > > -	sunxi_cedrus_write(dev, value & (~0xf), VE_MPEG_CTRL);
> > > -
> > > -	status = sunxi_cedrus_read(dev, VE_MPEG_STATUS);
> > > -	sunxi_cedrus_write(dev, 0x0000c00f, VE_MPEG_STATUS);
> > > -	sunxi_cedrus_engine_disable(dev);
> > 
> > This call was dropped from the code reorganization. What it intentional?
> > 
> > IMO, it should be brought back to the irq_disable ops for MPEG2 (and the
> > same probably applies to H264).
> 
> Actually, this doesn't seem like the right place to put it.
> 
> Looking at the sunxi_engine_enable function, explicitly passing the
> codec as an argument and calling that function from each codec's code
> feels strange.

This isn't what this code is doing. You have three engines, each of
them implementing a different set of codec. The JPEG engine implements
MPEG1, MPEG2 and MPEG4, the H264 engine H264 and VP8, and the H265
H265 and VP9.

So there is no direct match between a codec and an engine.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)