[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdWqowQjZ8Wsdj6ne-+UG8-OY_j6pi3R9JPP6L7ZgRhvBQ@mail.gmail.com>
Date: Thu, 28 Jun 2018 14:45:41 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Simon Horman <horms@...ge.net.au>
Cc: Michel Pollet <michel.pollet@...renesas.com>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
Phil Edworthy <phil.edworthy@...esas.com>,
Michel Pollet <buserror+upstream@...il.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
linux-clk <linux-clk@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v9 3/5] ARM: dts: Renesas R9A06G032 base device tree file
Hi Simon,
On Thu, Jun 28, 2018 at 2:16 PM Simon Horman <horms@...ge.net.au> wrote:
> On Thu, Jun 28, 2018 at 02:00:32PM +0200, Simon Horman wrote:
> > On Thu, Jun 14, 2018 at 11:56:32AM +0100, Michel Pollet wrote:
> > > This adds the Renesas R9A06G032 bare bone support.
> > >
> > > This currently only handles the SYSCTRL block note,
> > > generic parts (gic, architected timer) and a UART.
> > >
> > > Signed-off-by: Michel Pollet <michel.pollet@...renesas.com>
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
> > > Reviewed-by: Simon Horman <horms+renesas@...ge.net.au>
> >
> > Thanks, applied with the following appended:
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 9d5eeff51b5f..4c85ac04872d 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1969,6 +1969,7 @@ S: Supported
> > F: arch/arm/boot/dts/emev2*
> > F: arch/arm/boot/dts/r7s*
> > F: arch/arm/boot/dts/r8a*
> > +F: arch/arm/boot/dts/r9a*
> > F: arch/arm/boot/dts/sh*
> > F: arch/arm/configs/shmobile_defconfig
> > F: arch/arm/include/debug/renesas-scif.S
>
> One more update.
>
> dt-bindings/clock/r9a06g032-sysctrl.h is not present in v4.18-rc1,
> current base of the renesas tree and likely base for the rest of the v4.19
> development cycle.
>
> Accordingly I have removed the include of that header and replaced
> the use of symbols it defines with numeric constants. The result is below.
Oh right. Thanks!
> Please:
> 1) Check that this is correct and
Looks good to me, except for the bogus "fixes" and "SoB" below
(bad squash?)
> From: Michel Pollet <michel.pollet@...renesas.com>
> Subject: [PATCH] ARM: dts: Renesas R9A06G032 base device tree file
>
> This adds the Renesas R9A06G032 bare bone support.
>
> This currently only handles the SYSCTRL block note,
> generic parts (gic, architected timer) and a UART.
>
> Signed-off-by: Michel Pollet <michel.pollet@...renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
> [simon: updated MAINTAINERS file
> [simon: do not use r9a06g032-sysctrl.h as it is not in the renesas tree yet]
> Signed-off-by: Simon Horman <horms+renesas@...ge.net.au>
>
> fixes
^^^^^
>
> Signed-off-by: Simon Horman <horms+renesas@...ge.net.au>
^^^^
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists