| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1530261541-23104-5-git-send-email-hayashi.kunihiko@socionext.com>
Date: Fri, 29 Jun 2018 17:39:01 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: Kishon Vijay Abraham I <kishon@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH 4/4] phy: socionext: add USB2 PHY driver for UniPhier SoC
Add a driver for PHY interface built into USB2 controller implemented on
UniPhier SoCs. This driver supports HS-PHY for Pro4 and LD11.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
---
drivers/phy/socionext/Kconfig | 13 ++
drivers/phy/socionext/Makefile | 1 +
drivers/phy/socionext/phy-uniphier-usb2.c | 218 ++++++++++++++++++++++++++++++
3 files changed, 232 insertions(+)
create mode 100644 drivers/phy/socionext/phy-uniphier-usb2.c
diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig
index 4a172fc..497ca38 100644
--- a/drivers/phy/socionext/Kconfig
+++ b/drivers/phy/socionext/Kconfig
@@ -2,6 +2,19 @@
# PHY drivers for Socionext platforms.
#
+config PHY_UNIPHIER_USB2
+ tristate "UniPhier USB2 PHY driver"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support USB PHY implemented on USB2 controller
+ on UniPhier SoCs. This driver provides interface to interact
+ with USB 2.0 PHY that is part of the UniPhier SoC.
+ In case of Pro4, it is necessary to specify this USB2 PHY instead
+ of USB3 HS-PHY.
+
config PHY_UNIPHIER_USB3
tristate "UniPhier USB3 PHY driver"
depends on ARCH_UNIPHIER || COMPILE_TEST
diff --git a/drivers/phy/socionext/Makefile b/drivers/phy/socionext/Makefile
index dfa5cec..6b4763e 100644
--- a/drivers/phy/socionext/Makefile
+++ b/drivers/phy/socionext/Makefile
@@ -3,4 +3,5 @@
# Makefile for the phy drivers.
#
+obj-$(CONFIG_PHY_UNIPHIER_USB2) += phy-uniphier-usb2.o
obj-$(CONFIG_PHY_UNIPHIER_USB3) += phy-uniphier-usb3hs.o phy-uniphier-usb3ss.o
diff --git a/drivers/phy/socionext/phy-uniphier-usb2.c b/drivers/phy/socionext/phy-uniphier-usb2.c
new file mode 100644
index 0000000..bab9e38
--- /dev/null
+++ b/drivers/phy/socionext/phy-uniphier-usb2.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-uniphier-usb2.c - PHY driver for UniPhier USB2 controller
+ * Copyright 2015-2018 Socionext Inc.
+ * Author:
+ * Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PHY_PARAMS 2
+
+struct uniphier_u2phy_soc_data {
+ struct {
+ u32 addr;
+ u32 val;
+ } param[PHY_PARAMS];
+};
+
+struct uniphier_u2phy_priv {
+ struct regmap *regmap;
+ struct phy *phy;
+ const struct uniphier_u2phy_soc_data *data;
+ struct uniphier_u2phy_priv *next;
+};
+
+static int uniphier_u2phy_init(struct phy *phy)
+{
+ struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
+ int i;
+
+ if (!priv->data)
+ return 0;
+
+ for (i = 0; i < PHY_PARAMS; i++)
+ regmap_write(priv->regmap,
+ priv->data->param[i].addr,
+ priv->data->param[i].val);
+
+ return 0;
+}
+
+static struct phy *uniphier_u2phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct uniphier_u2phy_priv *priv = dev_get_drvdata(dev);
+
+ while (priv && args->np != priv->phy->dev.of_node)
+ priv = priv->next;
+
+ if (!priv) {
+ dev_err(dev, "Failed to find appropriate phy\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return priv->phy;
+}
+
+static const struct phy_ops uniphier_u2phy_ops = {
+ .init = uniphier_u2phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int uniphier_u2phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *parent, *child;
+ struct uniphier_u2phy_priv *priv = NULL, *next = NULL;
+ struct phy_provider *phy_provider;
+ struct regmap *regmap;
+ struct phy *phy;
+ const struct uniphier_u2phy_soc_data *data;
+ int ret, data_idx, ndatas;
+
+ data = of_device_get_match_data(dev);
+ if (WARN_ON(!data))
+ return -EINVAL;
+
+ /* get number of data */
+ for (ndatas = 0; data[ndatas].param[0].addr; ndatas++)
+ ;
+
+ parent = of_get_parent(dev->of_node);
+ regmap = syscon_node_to_regmap(parent);
+ of_node_put(parent);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Failed to get regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ for_each_child_of_node(dev->of_node, child) {
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out_put_child;
+ }
+ priv->regmap = regmap;
+
+ phy = devm_phy_create(dev, child, &uniphier_u2phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "Failed to create phy\n");
+ ret = PTR_ERR(phy);
+ goto out_put_child;
+ }
+ priv->phy = phy;
+
+ ret = of_property_read_u32(child, "reg", &data_idx);
+ if (ret) {
+ dev_err(dev, "Failed to get reg property\n");
+ goto out_put_child;
+ }
+
+ if (data_idx < ndatas)
+ priv->data = &data[data_idx];
+ else
+ dev_warn(dev, "No phy configuration: %s\n",
+ child->full_name);
+
+ phy_set_drvdata(phy, priv);
+ priv->next = next;
+ next = priv;
+ }
+
+ dev_set_drvdata(dev, priv);
+ phy_provider = devm_of_phy_provider_register(dev,
+ uniphier_u2phy_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+
+out_put_child:
+ of_node_put(child);
+
+ return ret;
+}
+
+static const struct uniphier_u2phy_soc_data uniphier_pro4_data[] = {
+ {
+ .param = {
+ { 0x500, 0x05142400 },
+ { 0x50c, 0x00010010 },
+ },
+ },
+ {
+ .param = {
+ { 0x508, 0x05142400 },
+ { 0x50c, 0x00010010 },
+ },
+ },
+ {
+ .param = {
+ { 0x510, 0x05142400 },
+ { 0x51c, 0x00010010 },
+ },
+ },
+ {
+ .param = {
+ { 0x518, 0x05142400 },
+ { 0x51c, 0x00010010 },
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct uniphier_u2phy_soc_data uniphier_ld11_data[] = {
+ {
+ .param = {
+ { 0x500, 0x82280000 },
+ { 0x504, 0x00000106 },
+ },
+ },
+ {
+ .param = {
+ { 0x508, 0x82280000 },
+ { 0x50c, 0x00000106 },
+ },
+ },
+ {
+ .param = {
+ { 0x510, 0x82280000 },
+ { 0x514, 0x00000106 },
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id uniphier_u2phy_match[] = {
+ {
+ .compatible = "socionext,uniphier-pro4-usb2-phy",
+ .data = &uniphier_pro4_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld11-usb2-phy",
+ .data = &uniphier_ld11_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_u2phy_match);
+
+static struct platform_driver uniphier_u2phy_driver = {
+ .probe = uniphier_u2phy_probe,
+ .driver = {
+ .name = "uniphier-usb2-phy",
+ .of_match_table = uniphier_u2phy_match,
+ },
+};
+module_platform_driver(uniphier_u2phy_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>");
+MODULE_DESCRIPTION("UniPhier PHY driver for USB2 controller");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Powered by blists - more mailing lists