linux-kernel - [PATCH v3 4/6] arm64: dts: actions: Enable I2C1 and I2C2 in Bubblegum-96 board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180630133330.23858-5-manivannan.sadhasivam@linaro.org>
Date:   Sat, 30 Jun 2018 19:03:28 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     wsa@...-dreams.de, robh+dt@...nel.org, afaerber@...e.de
Cc:     linus.walleij@...aro.org, linux-i2c@...r.kernel.org,
        liuwei@...ions-semi.com, mp-cs@...ions-semi.com,
        96boards@...obotics.com, devicetree@...r.kernel.org,
        andy.shevchenko@...il.com, daniel.thompson@...aro.org,
        amit.kucheria@...aro.org, linux-arm-kernel@...ts.infradead.org,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        hzhang@...obotics.com, bdong@...obotics.com,
        manivannanece23@...il.com, thomas.liau@...ions-semi.com,
        jeff.chen@...ions-semi.com,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v3 4/6] arm64: dts: actions: Enable I2C1 and I2C2 in Bubblegum-96 board

Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
index d0ba35df9015..57ae374cfb5a 100644
--- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "s900.dtsi"
+#include "s900-bubblegum-96-pins.dtsi"
 
 / {
 	compatible = "ucrobotics,bubblegum-96", "actions,s900";
@@ -35,6 +36,16 @@
 	clocks = <&cmu CLK_UART5>;
 };
 
+&i2c1 {
+	status = "okay";
+	clocks = <&cmu CLK_I2C1>;
+};
+
+&i2c2 {
+	status = "okay";
+	clocks = <&cmu CLK_I2C2>;
+};
+
 /*
  * GPIO name legend: proper name = the GPIO line is used as GPIO
  *         NC = not connected (pin out but not routed from the chip to
-- 
2.17.1