[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180701023518.GB4348@dragon>
Date: Sun, 1 Jul 2018 10:35:19 +0800
From: Shawn Guo <shawnguo@...nel.org>
To: Alex Gonzalez <alex.gonzalez@...i.com>
Cc: mark.rutland@....com, devicetree@...r.kernel.org,
s.hauer@...gutronix.de, linux-kernel@...r.kernel.org,
robh+dt@...nel.org, linux-imx@....com, kernel@...gutronix.de,
fabio.estevam@....com, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/2] ARM: dts: imx6ul: Add DTS for ConnectCore 6UL
System-On-Module (SOM)
On Tue, Jun 19, 2018 at 09:32:13AM +0200, Alex Gonzalez wrote:
> The ConnectCore 6UL System-On-Module has the following hardware
> specification:
>
> * Based on a NXP i.MX6UL SoC
> * Industrial temperature ranges (-40ºC to +85ºC)
> * Up to 1GB DDR3 memory
> * Up to 2GB NAND flash
> * Dual Ethernet
> * On module 802.11 WiFi and Bluetooth 4.2 (QCA6564)
> * On module NXP Kinetis KL03
> * On module Microchip ATECC508A crypto element
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@...i.com>
> ---
> arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 199 ++++++++++++++++++++++++++++++
> 1 file changed, 199 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
>
> diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
> new file mode 100644
> index 000000000000..23484a48f6e0
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
> @@ -0,0 +1,199 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Digi International's ConnectCore 6UL System-On-Module device tree source
> + *
> + * Copyright 2018 Digi International, Inc.
> + *
> + */
> +
> +/ {
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + linux,cma {
> + compatible = "shared-dma-pool";
> + reusable;
> + size = <0x4000000>;
> + linux,cma-default;
> + };
> + };
> +};
> +
> +&adc1 {
> + vref-supply = <&vdda_adc_3v3>;
> + max-channel = <9>;
Undocumented DT property?
> +};
> +
> +&gpmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpmi_nand>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pmic: pfuze3000@8 {
Node name should be generic, while label can be specific.
pfuze3000: pmic@8 {
> + compatible = "fsl,pfuze3000";
> + reg = <0x08>;
> +
> + regulators {
> + int_3v3: sw1a {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <6250>;
> + regulator-boot-on;
> + regulator-always-on;
Please have a newline between property list and child node.
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_arm_soc_in: sw1b {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1475000>;
> + regulator-ramp-delay = <6250>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <925000>;
> + };
> + };
> +
> + ext_3v3: sw2 {
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <6250>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr3: sw3 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1650000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1300000>;
> + };
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + vdd_snvs_3v3: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vrefddr: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vdda_adc_3v3: vldo1 {
> + compatible = "regulator-fixed";
> + regulator-name = "vref-adc-3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo2_ext: vldo2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vdda_wlan: vccsd {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_high_in: v33 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo3_int: vldo3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo4_ext: vldo4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vcoin_chg: vcoin {
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> +};
> +
> +&iomuxc {
> + imx6ul-ccimx6ul {
This container node can be dropped.
Shawn
> + pinctrl_gpmi_nand: gpmigrp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
> + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
> + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
> + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
> + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
> + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
> + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
> + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
> + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
> + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
> + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
> + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
> + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
> + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
> + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
> + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
> + >;
> + };
> + };
> +};
> +
> +®_arm {
> + vin-supply = <&vdd_arm_soc_in>;
> + regulator-allow-bypass;
> +};
> +
> +®_soc {
> + vin-supply = <&vdd_arm_soc_in>;
> + regulator-allow-bypass;
> +};
> +
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists