linux-kernel - [PATCH] regulator: Revert "regulator: pfuze100: add enable/disable for switch"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sun,  1 Jul 2018 22:18:27 -0300
From:   Fabio Estevam <festevam@...il.com>
To:     broonie@...nel.org
Cc:     shawnguo@...nel.org, anson.huang@....com,
        linux-kernel@...r.kernel.org, Fabio Estevam <fabio.estevam@....com>
Subject: [PATCH] regulator: Revert "regulator: pfuze100: add enable/disable for switch"

From: Fabio Estevam <fabio.estevam@....com>

This reverts commit 5fe156f1cab4f340ddb6283c993912be77594016.

Commit 5fe156f1cab4 ("regulator: pfuze100: add enable/disable for switch")
causes boot regression on some platforms such as imx6sl-evk and
imx6sll-evk.

After this commit the SW4 regulator will be turned
off and since it supplies the DDR voltage on these boards, a
kernel hang is observed.

Revert it to avoid breaking old dtb's.

Fixes: 5fe156f1cab4 ("regulator: pfuze100: add enable/disable for switch")
Signed-off-by: Fabio Estevam <fabio.estevam@....com>
---
 drivers/regulator/pfuze100-regulator.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 32f9af7..cde6eda 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -163,9 +163,6 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = {
 };
 
 static const struct regulator_ops pfuze100_sw_regulator_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -212,11 +209,6 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
 			.uV_step = (step),	\
 			.vsel_reg = (base) + PFUZE100_VOL_OFFSET,	\
 			.vsel_mask = 0x3f,	\
-			.enable_reg = (base) + PFUZE100_MODE_OFFSET,	\
-			.enable_val = 0xc,	\
-			.disable_val = 0x0,	\
-			.enable_mask = 0xf,	\
-			.enable_time = 500,	\
 		},	\
 		.stby_reg = (base) + PFUZE100_STANDBY_OFFSET,	\
 		.stby_mask = 0x3f,	\
-- 
2.7.4