[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180702102721.3546-4-heiko@sntech.de>
Date: Mon, 2 Jul 2018 12:27:20 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: thierry.reding@...il.com
Cc: robh+dt@...nel.org, mark.rutland@....com,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, seanpaul@...omium.org,
briannorris@...omium.org, hl@...k-chips.com,
emil.l.velikov@...il.com, Heiko Stuebner <heiko@...ech.de>
Subject: [PATCH v5 3/4] dt-bindings: Add Innolux P097PFG panel bindings
From: huang lin <hl@...k-chips.com>
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- use separate file for binding
- keep power supplies as required
Signed-off-by: Lin Huang <hl@...k-chips.com>
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
---
.../display/panel/innolux,p097pfg.txt | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
new file mode 100644
index 000000000000..595d9dfeffd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
@@ -0,0 +1,24 @@
+Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p097pfg"
+- reg: DSI virtual channel of the peripheral
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ &mipi_dsi {
+ panel {
+ compatible = "innolux,p079zca";
+ reg = <0>;
+ avdd-supply = <...>;
+ avee-supply = <...>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.17.0
Powered by blists - more mailing lists