[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1530532746-619-2-git-send-email-abel.vesa@nxp.com>
Date: Mon, 2 Jul 2018 14:59:05 +0300
From: Abel Vesa <abel.vesa@....com>
To: Lucas Stach <l.stach@...gutronix.de>,
Rob Herring <robh@...nel.org>,
Dong Aisheng <aisheng.dong@....com>
Cc: linux-gpio@...r.kernel.org, linux-imx@....com,
Shawn Guo <shawnguo@...nel.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Abel Vesa <abelvesa@...ux.com>, Abel Vesa <abel.vesa@....com>
Subject: [PATCH v6 1/2] dt-bindings: add binding for i.MX8MQ IOMUXC
This adds the binding for the i.MX8MQ pin controller, in the same
fashion as earlier i.MX SoCs.
Signed-off-by: Abel Vesa <abel.vesa@....com>
Acked-by: Dong Aisheng <aisheng.dong@....com>
---
.../bindings/pinctrl/fsl,imx8mq-pinctrl.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
new file mode 100644
index 0000000..66de750
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale IMX8MQ IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+for common binding part and usage.
+
+Required properties:
+- compatible: "fsl,imx8mq-iomuxc"
+- reg: should contain the base physical address and size of the iomuxc
+ registers.
+
+Required properties in sub-nodes:
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx8mq-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad
+ Reference Manual for detailed CONFIG settings.
+
+Examples:
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+iomuxc: pinctrl@...30000 {
+ compatible = "fsl,imx8mq-iomuxc";
+ reg = <0x0 0x30330000 0x0 0x10000>;
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
+ >;
+ };
+};
--
2.7.4
Powered by blists - more mailing lists