linux-kernel - Re: [RFC PATCH] ata: ahci: Enable DEVSLP by default on x86 modern standby platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180702202151.GK533219@devbig577.frc2.facebook.com>
Date:   Mon, 2 Jul 2018 13:21:51 -0700
From:   Tejun Heo <tj@...nel.org>
To:     Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Cc:     hdegoede@...hat.com, rjw@...ysocki.net, alan.cox@...el.com,
        linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-pm@...r.kernel.org, Mario.Limonciello@...l.com
Subject: Re: [RFC PATCH] ata: ahci: Enable DEVSLP by default on x86 modern
 standby platform

On Mon, Jul 02, 2018 at 12:08:45PM -0700, Srinivas Pandruvada wrote:
> From: Srinivas <srinivas.pandruvada@...ux.intel.com>
> 
> One of the requirement for modern x86 system to enter lowest power mode
> (SLP_S0) is SATA IP block to be off. This is true even during when
> platform is suspended to idle and not only in opportunistic (runtime)
> suspend.
> 
> Several of these system don't have traditional ACPI S3, so it is
> important that they enter SLP_S0 state, to avoid draining battery even
> during suspend even with out of the box Linux installation.
> 
> SATA IP block doesn't get turned off till SATA is in DEVSLP mode. Here
> user has to either use scsi-host sysfs or tools like powertop to set
> the sata-host link_power_management_policy to min_power.
> 
> This change sets by default link power management policy to min_power
> for some platforms.  To avoid regressions, the following conditions
> are used:
> - The kernel config is already set to use med_power_with_dipm or deeper
> - System is a modern standby system using ACPI low power idle flag
> - The platform is not blacklisted for Suspend to Idle and suspend
> to idle is used instead of S3
> This combination will make sure that systems are fairly recent and
> since getting shipped with modern standby standby, the DEVSLP function
> is already validated.
> 
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>

Seems sane to me.  Hans, what do you think?

Thanks.

-- 
tejun