Message-ID: <CANLsYkxpLyqN76KQ3VyLq8H27hLsHxLy+zZA1xRyUXGXwx42AA@mail.gmail.com>
Date:   Tue, 3 Jul 2018 14:30:48 -0600
From:   Mathieu Poirier <mathieu.poirier@...aro.org>
To:     Peter Zijlstra <peterz@...radead.org>,
        Arnaldo Carvalho de Melo <acme@...nel.org>,
        Ingo Molnar <mingo@...hat.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
        schwidefsky@...ibm.com, heiko.carstens@...ibm.com,
        Will Deacon <will.deacon@....com>,
        Mark Rutland <mark.rutland@....com>,
        Jiri Olsa <jolsa@...hat.com>,
        Namhyung Kim <namhyung@...nel.org>,
        Adrian Hunter <adrian.hunter@...el.com>, ast@...nel.org,
        Greg KH <gregkh@...uxfoundation.org>,
        "H. Peter Anvin" <hpa@...or.com>, linux-s390@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 5/6] perf/core: Use ioctl to communicate driver
 configuration to kernel

Hi Alex,

On Tue, 3 Jul 2018 at 04:03, Alexander Shishkin
<alexander.shishkin@...ux.intel.com> wrote:
>
> On Mon, Jul 02, 2018 at 04:33:29PM -0600, Mathieu Poirier wrote:
> > This patch follows what has been done for filters by adding an ioctl()
> > option to communicate to the kernel arbitrary PMU specific configuration
> > that don't fit in the conventional struct perf_event_attr to the kernel.
>
> Ok, so what *is* the PMU specific configuration that doesn't fit in the
> attribute and needs to be re-configured by the driver using the generation
> tracking?
>

In this patchset I'm am after the specification of sink information
for each event, i.e what sink a CPU is supposed to use for the
session.  I simply don't see putting something that PMU specific in
the generic perf_event_attr structure.  I also intend to use the same
ioctl mechanism to communicate complex tracer configuration for
sequencers, counters and input events.  I don't see a nice way of
doing that from the perf_event_attr, and that is even without thinking
about the different flavours of tracers out there, all with their own
features.

I've looked around and the only clean way I found to support this is
via an ioctl().  That way each tracer can easily identify the sink it
should be using without smearing the perf_event_attr structure.  I
would be happy to explore a different avenue should you think of
something.

Thanks,
Mathieu

> > Signed-off-by: Mathieu Poirier <mathieu.poirier@...aro.org>
> > ---
> >  include/linux/perf_event.h |  54 ++++++++++++++++++++++
> >  kernel/events/core.c       | 110 +++++++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 164 insertions(+)
> >
> > diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
> > index 4d9c8f30ca6c..6e06b63c262f 100644
> > --- a/include/linux/perf_event.h
> > +++ b/include/linux/perf_event.h
> > @@ -178,6 +178,12 @@ struct hw_perf_event {
> >       /* Last sync'ed generation of filters */
> >       unsigned long                   addr_filters_gen;
> >
> > +     /* PMU driver configuration */
> > +     void                            *drv_config;
> > +
> > +     /* Last sync'ed generation of driver config */
> > +     unsigned long                   drv_config_gen;
> > +
> >  /*
> >   * hw_perf_event::state flags; used to track the PERF_EF_* state.
> >   */
> > @@ -447,6 +453,26 @@ struct pmu {
> >        * Filter events for PMU-specific reasons.
> >        */
> >       int (*filter_match)             (struct perf_event *event); /* optional */
> > +
> > +     /*
> > +      * Valiate complex PMU configuration that don't fit in the
> > +      * perf_event_attr struct.  Returns a PMU specific pointer or an error
> > +      * value < 0.
> > +      *
> > +      * As with addr_filters_validate(), runs in the context of the ioctl()
> > +      * process and is not serialized with the rest of the PMU callbacks.
>
> Yes, but what is it? I get it that it's probably in one of the other
> patches, but we still need to mention it somewhere here.
>
> > +      */
> > +     void *(*drv_config_validate)    (struct perf_event *event,
> > +                                      char *config_str);
> > +
> > +     /* Synchronize PMU driver configuration */
> > +     void (*drv_config_sync)         (struct perf_event *event);
> > +
> > +     /*
> > +      * Release PMU specific configuration acquired by
> > +      * drv_config_validate()
> > +      */
> > +     void (*drv_config_free)         (void *drv_data);
> >  };
> >
> >  enum perf_addr_filter_action_t {
> > @@ -489,6 +515,11 @@ struct perf_addr_filters_head {
> >       unsigned int            nr_file_filters;
> >  };
> >
> > +struct perf_drv_config {
> > +     void            *drv_config;
> > +     raw_spinlock_t  lock;
> > +};
> > +
> >  /**
> >   * enum perf_event_state - the states of a event
> >   */
> > @@ -668,6 +699,10 @@ struct perf_event {
> >       unsigned long                   *addr_filters_offs;
> >       unsigned long                   addr_filters_gen;
> >
> > +     /* PMU driver specific configuration */
> > +     struct perf_drv_config          drv_config;
> > +     unsigned long                   drv_config_gen;
> > +
> >       void (*destroy)(struct perf_event *);
> >       struct rcu_head                 rcu_head;
> >
> > @@ -1234,6 +1269,13 @@ static inline bool has_addr_filter(struct perf_event *event)
> >       return event->pmu->nr_addr_filters;
> >  }
> >
> > +static inline bool has_drv_config(struct perf_event *event)
> > +{
> > +     return event->pmu->drv_config_validate &&
> > +            event->pmu->drv_config_sync &&
> > +            event->pmu->drv_config_free;
> > +}
> > +
> >  /*
> >   * An inherited event uses parent's filters
> >   */
> > @@ -1248,7 +1290,19 @@ perf_event_addr_filters(struct perf_event *event)
> >       return ifh;
> >  }
> >
> > +static inline struct perf_drv_config *
> > +perf_event_get_drv_config(struct perf_event *event)
> > +{
> > +     struct perf_drv_config *cfg = &event->drv_config;
> > +
> > +     if (event->parent)
> > +             cfg = &event->parent->drv_config;
> > +
> > +     return cfg;
> > +}
> > +
> >  extern void perf_event_addr_filters_sync(struct perf_event *event);
> > +extern void perf_event_drv_config_sync(struct perf_event *event);
> >
> >  extern int perf_output_begin(struct perf_output_handle *handle,
> >                            struct perf_event *event, unsigned int size);
> > diff --git a/kernel/events/core.c b/kernel/events/core.c
> > index 8f0434a9951a..701839866789 100644
> > --- a/kernel/events/core.c
> > +++ b/kernel/events/core.c
> > @@ -2829,6 +2829,29 @@ void perf_event_addr_filters_sync(struct perf_event *event)
> >  }
> >  EXPORT_SYMBOL_GPL(perf_event_addr_filters_sync);
> >
> > +/*
> > + * PMU driver configuration works the same way as filter management above,
> > + * but without the need to deal with memory mapping.  Driver configuration
> > + * arrives through the SET_DRV_CONFIG ioctl() where it is validated and applied
> > + * to the event.  When the PMU is ready it calls perf_event_drv_config_sync() to
> > + * bring the configuration information within reach of the PMU.
>
> Wait a second. The reason why we dance around with the generations of filters
> is the locking order of ctx::mutex vs mmap_sem. In an mmap path, where we're
> notified about mapping changes, we're called under the latter, and we'd need
> to grab the former to update the event configuration. In your case, the
> update comes in via perf_ioctl(), where we're already holding the ctx::mutex,
> so you can just kick the PMU right there, via an event_function_call() or
> perf_event_stop(restart=1). In the latter case, your pmu::start() would just
> grab the new configuration. Should also be about 90% less code. :)
>
> Would this work for you or am I misunderstanding something about your
> requirements?
>
> > + */
> > +void perf_event_drv_config_sync(struct perf_event *event)
> > +{
> > +     struct perf_drv_config *drv_config = perf_event_get_drv_config(event);
> > +
> > +     if (!has_drv_config(event))
> > +             return;
> > +
> > +     raw_spin_lock(&drv_config->lock);
> > +     if (event->drv_config_gen != event->hw.drv_config_gen) {
> > +             event->pmu->drv_config_sync(event);
> > +             event->hw.drv_config_gen = event->drv_config_gen;
> > +     }
> > +     raw_spin_unlock(&drv_config->lock);
> > +}
> > +EXPORT_SYMBOL_GPL(perf_event_drv_config_sync);
> > +
> >  static int _perf_event_refresh(struct perf_event *event, int refresh)
> >  {
> >       /*
> > @@ -4410,6 +4433,7 @@ static bool exclusive_event_installable(struct perf_event *event,
> >
> >  static void perf_addr_filters_splice(struct perf_event *event,
> >                                      struct list_head *head);
> > +static void perf_drv_config_splice(struct perf_event *event, void *drv_data);
> >
> >  static void _free_event(struct perf_event *event)
> >  {
> > @@ -4440,6 +4464,7 @@ static void _free_event(struct perf_event *event)
> >       perf_event_free_bpf_prog(event);
> >       perf_addr_filters_splice(event, NULL);
> >       kfree(event->addr_filters_offs);
> > +     perf_drv_config_splice(event, NULL);
> >
> >       if (event->destroy)
> >               event->destroy(event);
> > @@ -5002,6 +5027,8 @@ static inline int perf_fget_light(int fd, struct fd *p)
> >  static int perf_event_set_output(struct perf_event *event,
> >                                struct perf_event *output_event);
> >  static int perf_event_set_filter(struct perf_event *event, void __user *arg);
> > +static int perf_event_set_drv_config(struct perf_event *event,
> > +                                  void __user *arg);
> >  static int perf_event_set_bpf_prog(struct perf_event *event, u32 prog_fd);
> >  static int perf_copy_attr(struct perf_event_attr __user *uattr,
> >                         struct perf_event_attr *attr);
> > @@ -5088,6 +5115,10 @@ static long _perf_ioctl(struct perf_event *event, unsigned int cmd, unsigned lon
> >
> >               return perf_event_modify_attr(event,  &new_attr);
> >       }
> > +
> > +     case PERF_EVENT_IOC_SET_DRV_CONFIG:
> > +             return perf_event_set_drv_config(event, (void __user *)arg);
> > +
> >       default:
> >               return -ENOTTY;
> >       }
> > @@ -9086,6 +9117,85 @@ static int perf_event_set_filter(struct perf_event *event, void __user *arg)
> >       return ret;
> >  }
> >
> > +static void perf_drv_config_splice(struct perf_event *event, void *drv_data)
>
> I think the address filter counterpart is called "splice" because it takes
> a list_head as a parameter and splices that list into the list of filters.
> I'd suggest that this one is more like "replace", but up to you.
>
> > +{
> > +     unsigned long flags;
> > +     void *old_drv_data;
> > +
> > +     if (!has_drv_config(event))
> > +             return;
> > +
> > +     /* Children take their configuration from their parent */
> > +     if (event->parent)
> > +             return;
> > +
> > +     raw_spin_lock_irqsave(&event->drv_config.lock, flags);
> > +
> > +     old_drv_data = event->drv_config.drv_config;
> > +     event->drv_config.drv_config = drv_data;
>
> Now I'm thinking: should we reset the generation here (and also in the
> address filters bit)? At least, it deserves a comment.
>
> > +
> > +     raw_spin_unlock_irqrestore(&event->drv_config.lock, flags);
> > +
> > +     event->pmu->drv_config_free(old_drv_data);
> > +}
> > +
> > +static void perf_event_drv_config_apply(struct perf_event *event)
> > +{
> > +     unsigned long flags;
> > +     struct perf_drv_config *drv_config = perf_event_get_drv_config(event);
> > +
> > +     /* Notify event that a new configuration is available */
> > +     raw_spin_lock_irqsave(&drv_config->lock, flags);
> > +     event->drv_config_gen++;
> > +     raw_spin_unlock_irqrestore(&drv_config->lock, flags);
>
> Should we also mention how this new locks fits into the existing locking
> order?
>
> Regards,
> --
> Alex

Powered by blists - more mailing lists