linux-kernel - [PATCH v2 02/32] mtd: rawnand: brcmnand: convert driver to nand

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180703220029.19565-3-miquel.raynal@bootlin.com>
Date:   Tue,  3 Jul 2018 23:59:59 +0200
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Wenyou Yang <wenyou.yang@...rochip.com>,
        Josh Wu <rainyfeeling@...look.com>,
        Tudor Ambarus <Tudor.Ambarus@...rochip.com>,
        Boris Brezillon <boris.brezillon@...tlin.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Richard Weinberger <richard@....at>,
        David Woodhouse <dwmw2@...radead.org>,
        Brian Norris <computersforpeace@...il.com>,
        Marek Vasut <marek.vasut@...il.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Kamal Dasu <kdasu.kdev@...il.com>,
        Masahiro Yamada <yamada.masahiro@...ionext.com>,
        Han Xu <han.xu@....com>,
        Harvey Hunt <harveyhuntnexus@...il.com>,
        Vladimir Zapolskiy <vz@...ia.com>,
        Sylvain Lemieux <slemieux.tyco@...il.com>,
        Xiaolei Li <xiaolei.li@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Marc Gonzalez <marc.w.gonzalez@...e.fr>,
        Mans Rullgard <mans@...sr.com>, Stefan Agner <stefan@...er.ch>
Cc:     linux-mtd@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-mediatek@...ts.infradead.org
Subject: [PATCH v2 02/32] mtd: rawnand: brcmnand: convert driver to nand_scan()

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 43 ++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 1306aaa7a8bf..99ab7b93756c 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2208,6 +2208,28 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 	return 0;
 }
 
+static int brcmnand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct brcmnand_host *host = nand_get_controller_data(chip);
+	int ret;
+
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	if (brcmnand_setup_dev(host))
+		return -ENXIO;
+
+	chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512;
+
+	/* only use our internal HW threshold */
+	mtd->bitflip_threshold = 1;
+
+	ret = brcmstb_choose_ecc_layout(host);
+
+	return ret;
+}
+
 static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 {
 	struct brcmnand_controller *ctrl = host->ctrl;
@@ -2267,10 +2289,6 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 	nand_writereg(ctrl, cfg_offs,
 		      nand_readreg(ctrl, cfg_offs) & ~CFG_BUS_WIDTH);
 
-	ret = nand_scan_ident(mtd, 1, NULL);
-	if (ret)
-		return ret;
-
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
 	/*
 	 * Avoid (for instance) kmap()'d buffers from JFFS2, which we can't DMA
@@ -2279,21 +2297,8 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 	 */
 	chip->options |= NAND_USE_BOUNCE_BUFFER;
 
-	if (chip->bbt_options & NAND_BBT_USE_FLASH)
-		chip->bbt_options |= NAND_BBT_NO_OOB;
-
-	if (brcmnand_setup_dev(host))
-		return -ENXIO;
-
-	chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512;
-	/* only use our internal HW threshold */
-	mtd->bitflip_threshold = 1;
-
-	ret = brcmstb_choose_ecc_layout(host);
-	if (ret)
-		return ret;
-
-	ret = nand_scan_tail(mtd);
+	chip->controller->attach_chip = brcmnand_attach_chip;
+	ret = nand_scan(mtd, 1);
 	if (ret)
 		return ret;
 
-- 
2.14.1