[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180703220029.19565-30-miquel.raynal@bootlin.com>
Date: Wed, 4 Jul 2018 00:00:26 +0200
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Wenyou Yang <wenyou.yang@...rochip.com>,
Josh Wu <rainyfeeling@...look.com>,
Tudor Ambarus <Tudor.Ambarus@...rochip.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Kamal Dasu <kdasu.kdev@...il.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Han Xu <han.xu@....com>,
Harvey Hunt <harveyhuntnexus@...il.com>,
Vladimir Zapolskiy <vz@...ia.com>,
Sylvain Lemieux <slemieux.tyco@...il.com>,
Xiaolei Li <xiaolei.li@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>,
Marc Gonzalez <marc.w.gonzalez@...e.fr>,
Mans Rullgard <mans@...sr.com>, Stefan Agner <stefan@...er.ch>
Cc: linux-mtd@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
linux-mediatek@...ts.infradead.org
Subject: [PATCH v2 29/32] mtd: rawnand: qcom: convert driver to nand_scan()
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
drivers/mtd/nand/raw/qcom_nandc.c | 67 ++++++++++++---------------------------
1 file changed, 20 insertions(+), 47 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 160acdff7d86..9407357ff77a 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2423,10 +2423,10 @@ qcom_nandc_calc_ecc_bytes(int step_size, int strength)
NAND_ECC_CAPS_SINGLE(qcom_nandc_ecc_caps, qcom_nandc_calc_ecc_bytes,
NANDC_STEP_SIZE, 4, 8);
-static int qcom_nand_host_setup(struct qcom_nand_host *host)
+static int qcom_nand_attach_chip(struct nand_chip *chip)
{
- struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int cwperpage, bad_block_byte, ret;
@@ -2729,9 +2729,9 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
return 0;
}
-static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
- struct qcom_nand_host *host,
- struct device_node *dn)
+static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
+ struct qcom_nand_host *host,
+ struct device_node *dn)
{
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
@@ -2778,30 +2778,14 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
/* set up initial status value */
host->status = NAND_STATUS_READY | NAND_STATUS_WP;
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret)
- return ret;
-
- ret = qcom_nand_host_setup(host);
-
- return ret;
-}
-
-static int qcom_nand_mtd_register(struct qcom_nand_controller *nandc,
- struct qcom_nand_host *host,
- struct device_node *dn)
-{
- struct nand_chip *chip = &host->chip;
- struct mtd_info *mtd = nand_to_mtd(chip);
- int ret;
-
- ret = nand_scan_tail(mtd);
+ chip->controller->attach_chip = qcom_nand_attach_chip;
+ ret = nand_scan(mtd, 1);
if (ret)
return ret;
ret = mtd_device_register(mtd, NULL, 0);
if (ret)
- nand_cleanup(mtd_to_nand(mtd));
+ nand_cleanup(chip);
return ret;
}
@@ -2810,9 +2794,19 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
{
struct device *dev = nandc->dev;
struct device_node *dn = dev->of_node, *child;
- struct qcom_nand_host *host, *tmp;
+ struct qcom_nand_host *host;
int ret;
+ if (nandc->props->is_bam) {
+ free_bam_transaction(nandc);
+ nandc->bam_txn = alloc_bam_transaction(nandc);
+ if (!nandc->bam_txn) {
+ dev_err(nandc->dev,
+ "failed to allocate bam transaction\n");
+ return -ENOMEM;
+ }
+ }
+
for_each_available_child_of_node(dn, child) {
host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
if (!host) {
@@ -2820,7 +2814,7 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
return -ENOMEM;
}
- ret = qcom_nand_host_init(nandc, host, child);
+ ret = qcom_nand_host_init_and_register(nandc, host, child);
if (ret) {
devm_kfree(dev, host);
continue;
@@ -2829,27 +2823,6 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
list_add_tail(&host->node, &nandc->host_list);
}
- if (list_empty(&nandc->host_list))
- return -ENODEV;
-
- if (nandc->props->is_bam) {
- free_bam_transaction(nandc);
- nandc->bam_txn = alloc_bam_transaction(nandc);
- if (!nandc->bam_txn) {
- dev_err(nandc->dev,
- "failed to allocate bam transaction\n");
- return -ENOMEM;
- }
- }
-
- list_for_each_entry_safe(host, tmp, &nandc->host_list, node) {
- ret = qcom_nand_mtd_register(nandc, host, child);
- if (ret) {
- list_del(&host->node);
- devm_kfree(dev, host);
- }
- }
-
if (list_empty(&nandc->host_list))
return -ENODEV;
--
2.14.1
Powered by blists - more mailing lists