| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 3 Jul 2018 14:57:16 +0000
From: Yixun Lan <yixun.lan@...ogic.com>
To: Jerome Brunet <jbrunet@...libre.com>,
Neil Armstrong <narmstrong@...libre.com>
CC: Yixun Lan <yixun.lan@...ogic.com>,
Kevin Hilman <khilman@...libre.com>,
Carlo Caione <carlo@...one.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Liang Yang <liang.yang@...ogic.com>,
Qiufang Dai <qiufang.dai@...ogic.com>,
Jian Hu <jian.hu@...ogic.com>, <linux-clk@...r.kernel.org>,
<linux-amlogic@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 3/3] clk: meson: add sub EMMC clock controller driver
This patch will add a EMMC clock controller driver support,
It provide a mux and divider clock.
This clock driver can be protentially used by either EMMC and
NAND driver.
Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
---
drivers/clk/meson/Kconfig | 9 +++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/emmc-clkc.c | 136 ++++++++++++++++++++++++++++++++++
3 files changed, 146 insertions(+)
create mode 100644 drivers/clk/meson/emmc-clkc.c
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f682b4..2f27ff08e4eb 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -15,6 +15,15 @@ config COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select RESET_CONTROLLER
+config COMMON_CLK_EMMC_MESON
+ tristate "Meson EMMC Sub Clock Controller Driver"
+ depends on COMMON_CLK_AMLOGIC
+ select MFD_SYSCON
+ select REGMAP
+ help
+ Support for the EMMC sub clock controller on AmLogic Meson Platform,
+ Say Y if you want this clock enabled.
+
config COMMON_CLK_REGMAP_MESON
bool
select REGMAP
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 72ec8c40d848..2f04f77ba4de 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
+obj-$(CONFIG_COMMON_CLK_EMMC_MESON) += emmc-clkc.o
obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
diff --git a/drivers/clk/meson/emmc-clkc.c b/drivers/clk/meson/emmc-clkc.c
new file mode 100644
index 000000000000..cf5bb9f34327
--- /dev/null
+++ b/drivers/clk/meson/emmc-clkc.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Amlogic Meson EMMC Sub Clock Controller Driver
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Yixun Lan <yixun.lan@...ogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/emmc-clkc.h>
+
+#include "clkc.h"
+
+#define SD_EMMC_CLOCK 0
+#define MUX_CLK_NUM_PARENTS 2
+#define EMMC_MAX_CLKS 2
+#define CLK_NAME_LEN 48
+
+static struct clk_regmap_mux_data emmc_clkc_mux_data = {
+ .offset = SD_EMMC_CLOCK,
+ .mask = 0x3,
+ .shift = 6,
+};
+
+static struct clk_regmap_div_data emmc_clkc_div_data = {
+ .offset = SD_EMMC_CLOCK,
+ .shift = 0,
+ .width = 6,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_ONE_BASED,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+ { .compatible = "amlogic,emmc-clkc" },
+ {}
+};
+
+static int emmc_clkc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk_regmap *mux, *div;
+ struct regmap *map;
+ struct clk *clk;
+ int i, ret;
+ const char *parent_names[MUX_CLK_NUM_PARENTS];
+ struct clk_init_data init;
+ char mux_name[CLK_NAME_LEN], div_name[CLK_NAME_LEN];
+ struct clk_hw_onecell_data *onecell_data;
+
+ map = syscon_node_to_regmap(dev->of_node);
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+
+ onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) +
+ sizeof(*onecell_data->hws) * EMMC_MAX_CLKS,
+ GFP_KERNEL);
+
+ if (!mux || !div || !onecell_data)
+ return -ENOMEM;
+
+ for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+ char name[8];
+
+ snprintf(name, sizeof(name), "clkin%d", i);
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ if (clk != ERR_PTR(-EPROBE_DEFER))
+ dev_err(dev, "Missing clock %s\n", name);
+ return PTR_ERR(clk);
+ }
+
+ parent_names[i] = __clk_get_name(clk);
+ }
+
+ mux->map = map;
+ mux->data = &emmc_clkc_mux_data;
+
+ snprintf(mux_name, CLK_NAME_LEN, "%s#emmc_mux", dev_name(dev));
+
+ init.name = mux_name;
+ init.ops = &clk_regmap_mux_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ init.num_parents = MUX_CLK_NUM_PARENTS;
+
+ mux->hw.init = &init;
+ ret = devm_clk_hw_register(dev, &mux->hw);
+ if (ret) {
+ dev_err(dev, "Mux clock registration failed\n");
+ return ret;
+ }
+
+ parent_names[0] = mux_name;
+ div->map = map;
+ div->data = &emmc_clkc_div_data;
+
+ snprintf(div_name, CLK_NAME_LEN, "%s#emmc_div", dev_name(dev));
+
+ init.name = div_name;
+ init.ops = &clk_regmap_divider_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ init.num_parents = 1;
+
+ div->hw.init = &init;
+ ret = devm_clk_hw_register(dev, &div->hw);
+ if (ret) {
+ dev_err(dev, "Div clock registration failed\n");
+ return ret;
+ }
+
+ onecell_data->hws[CLKID_EMMC_C_MUX] = &mux->hw,
+ onecell_data->hws[CLKID_EMMC_C_DIV] = &div->hw,
+ onecell_data->num = EMMC_MAX_CLKS;
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ onecell_data);
+}
+
+static struct platform_driver emmc_clkc_driver = {
+ .probe = emmc_clkc_probe,
+ .driver = {
+ .name = "emmc-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(emmc_clkc_driver);
--
2.18.0
Powered by blists - more mailing lists