Message-ID: <20180703100348.fy43f4fosw3fdc6i@um.fi.intel.com>
Date:   Tue, 3 Jul 2018 13:03:48 +0300
From:   Alexander Shishkin <alexander.shishkin@...ux.intel.com>
To:     Mathieu Poirier <mathieu.poirier@...aro.org>
Cc:     peterz@...radead.org, acme@...nel.org, mingo@...hat.com,
        tglx@...utronix.de, alexander.shishkin@...ux.intel.com,
        schwidefsky@...ibm.com, heiko.carstens@...ibm.com,
        will.deacon@....com, mark.rutland@....com, jolsa@...hat.com,
        namhyung@...nel.org, adrian.hunter@...el.com, ast@...nel.org,
        gregkh@...uxfoundation.org, hpa@...or.com,
        linux-s390@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 5/6] perf/core: Use ioctl to communicate driver
 configuration to kernel

On Mon, Jul 02, 2018 at 04:33:29PM -0600, Mathieu Poirier wrote:
> This patch follows what has been done for filters by adding an ioctl()
> option to communicate to the kernel arbitrary PMU specific configuration
> that don't fit in the conventional struct perf_event_attr to the kernel.

Ok, so what *is* the PMU specific configuration that doesn't fit in the
attribute and needs to be re-configured by the driver using the generation
tracking?

> Signed-off-by: Mathieu Poirier <mathieu.poirier@...aro.org>
> ---
>  include/linux/perf_event.h |  54 ++++++++++++++++++++++
>  kernel/events/core.c       | 110 +++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 164 insertions(+)
> 
> diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
> index 4d9c8f30ca6c..6e06b63c262f 100644
> --- a/include/linux/perf_event.h
> +++ b/include/linux/perf_event.h
> @@ -178,6 +178,12 @@ struct hw_perf_event {
>  	/* Last sync'ed generation of filters */
>  	unsigned long			addr_filters_gen;
>  
> +	/* PMU driver configuration */
> +	void				*drv_config;
> +
> +	/* Last sync'ed generation of driver config */
> +	unsigned long			drv_config_gen;
> +
>  /*
>   * hw_perf_event::state flags; used to track the PERF_EF_* state.
>   */
> @@ -447,6 +453,26 @@ struct pmu {
>  	 * Filter events for PMU-specific reasons.
>  	 */
>  	int (*filter_match)		(struct perf_event *event); /* optional */
> +
> +	/*
> +	 * Valiate complex PMU configuration that don't fit in the
> +	 * perf_event_attr struct.  Returns a PMU specific pointer or an error
> +	 * value < 0.
> +	 *
> +	 * As with addr_filters_validate(), runs in the context of the ioctl()
> +	 * process and is not serialized with the rest of the PMU callbacks.

Yes, but what is it? I get it that it's probably in one of the other
patches, but we still need to mention it somewhere here.

> +	 */
> +	void *(*drv_config_validate)	(struct perf_event *event,
> +					 char *config_str);
> +
> +	/* Synchronize PMU driver configuration */
> +	void (*drv_config_sync)		(struct perf_event *event);
> +
> +	/*
> +	 * Release PMU specific configuration acquired by
> +	 * drv_config_validate()
> +	 */
> +	void (*drv_config_free)		(void *drv_data);
>  };
>  
>  enum perf_addr_filter_action_t {
> @@ -489,6 +515,11 @@ struct perf_addr_filters_head {
>  	unsigned int		nr_file_filters;
>  };
>  
> +struct perf_drv_config {
> +	void		*drv_config;
> +	raw_spinlock_t	lock;
> +};
> +
>  /**
>   * enum perf_event_state - the states of a event
>   */
> @@ -668,6 +699,10 @@ struct perf_event {
>  	unsigned long			*addr_filters_offs;
>  	unsigned long			addr_filters_gen;
>  
> +	/* PMU driver specific configuration */
> +	struct perf_drv_config		drv_config;
> +	unsigned long			drv_config_gen;
> +
>  	void (*destroy)(struct perf_event *);
>  	struct rcu_head			rcu_head;
>  
> @@ -1234,6 +1269,13 @@ static inline bool has_addr_filter(struct perf_event *event)
>  	return event->pmu->nr_addr_filters;
>  }
>  
> +static inline bool has_drv_config(struct perf_event *event)
> +{
> +	return event->pmu->drv_config_validate &&
> +	       event->pmu->drv_config_sync &&
> +	       event->pmu->drv_config_free;
> +}
> +
>  /*
>   * An inherited event uses parent's filters
>   */
> @@ -1248,7 +1290,19 @@ perf_event_addr_filters(struct perf_event *event)
>  	return ifh;
>  }
>  
> +static inline struct perf_drv_config *
> +perf_event_get_drv_config(struct perf_event *event)
> +{
> +	struct perf_drv_config *cfg = &event->drv_config;
> +
> +	if (event->parent)
> +		cfg = &event->parent->drv_config;
> +
> +	return cfg;
> +}
> +
>  extern void perf_event_addr_filters_sync(struct perf_event *event);
> +extern void perf_event_drv_config_sync(struct perf_event *event);
>  
>  extern int perf_output_begin(struct perf_output_handle *handle,
>  			     struct perf_event *event, unsigned int size);
> diff --git a/kernel/events/core.c b/kernel/events/core.c
> index 8f0434a9951a..701839866789 100644
> --- a/kernel/events/core.c
> +++ b/kernel/events/core.c
> @@ -2829,6 +2829,29 @@ void perf_event_addr_filters_sync(struct perf_event *event)
>  }
>  EXPORT_SYMBOL_GPL(perf_event_addr_filters_sync);
>  
> +/*
> + * PMU driver configuration works the same way as filter management above,
> + * but without the need to deal with memory mapping.  Driver configuration
> + * arrives through the SET_DRV_CONFIG ioctl() where it is validated and applied
> + * to the event.  When the PMU is ready it calls perf_event_drv_config_sync() to
> + * bring the configuration information within reach of the PMU.

Wait a second. The reason why we dance around with the generations of filters
is the locking order of ctx::mutex vs mmap_sem. In an mmap path, where we're
notified about mapping changes, we're called under the latter, and we'd need
to grab the former to update the event configuration. In your case, the
update comes in via perf_ioctl(), where we're already holding the ctx::mutex,
so you can just kick the PMU right there, via an event_function_call() or
perf_event_stop(restart=1). In the latter case, your pmu::start() would just
grab the new configuration. Should also be about 90% less code. :)

Would this work for you or am I misunderstanding something about your
requirements?

> + */
> +void perf_event_drv_config_sync(struct perf_event *event)
> +{
> +	struct perf_drv_config *drv_config = perf_event_get_drv_config(event);
> +
> +	if (!has_drv_config(event))
> +		return;
> +
> +	raw_spin_lock(&drv_config->lock);
> +	if (event->drv_config_gen != event->hw.drv_config_gen) {
> +		event->pmu->drv_config_sync(event);
> +		event->hw.drv_config_gen = event->drv_config_gen;
> +	}
> +	raw_spin_unlock(&drv_config->lock);
> +}
> +EXPORT_SYMBOL_GPL(perf_event_drv_config_sync);
> +
>  static int _perf_event_refresh(struct perf_event *event, int refresh)
>  {
>  	/*
> @@ -4410,6 +4433,7 @@ static bool exclusive_event_installable(struct perf_event *event,
>  
>  static void perf_addr_filters_splice(struct perf_event *event,
>  				       struct list_head *head);
> +static void perf_drv_config_splice(struct perf_event *event, void *drv_data);
>  
>  static void _free_event(struct perf_event *event)
>  {
> @@ -4440,6 +4464,7 @@ static void _free_event(struct perf_event *event)
>  	perf_event_free_bpf_prog(event);
>  	perf_addr_filters_splice(event, NULL);
>  	kfree(event->addr_filters_offs);
> +	perf_drv_config_splice(event, NULL);
>  
>  	if (event->destroy)
>  		event->destroy(event);
> @@ -5002,6 +5027,8 @@ static inline int perf_fget_light(int fd, struct fd *p)
>  static int perf_event_set_output(struct perf_event *event,
>  				 struct perf_event *output_event);
>  static int perf_event_set_filter(struct perf_event *event, void __user *arg);
> +static int perf_event_set_drv_config(struct perf_event *event,
> +				     void __user *arg);
>  static int perf_event_set_bpf_prog(struct perf_event *event, u32 prog_fd);
>  static int perf_copy_attr(struct perf_event_attr __user *uattr,
>  			  struct perf_event_attr *attr);
> @@ -5088,6 +5115,10 @@ static long _perf_ioctl(struct perf_event *event, unsigned int cmd, unsigned lon
>  
>  		return perf_event_modify_attr(event,  &new_attr);
>  	}
> +
> +	case PERF_EVENT_IOC_SET_DRV_CONFIG:
> +		return perf_event_set_drv_config(event, (void __user *)arg);
> +
>  	default:
>  		return -ENOTTY;
>  	}
> @@ -9086,6 +9117,85 @@ static int perf_event_set_filter(struct perf_event *event, void __user *arg)
>  	return ret;
>  }
>  
> +static void perf_drv_config_splice(struct perf_event *event, void *drv_data)

I think the address filter counterpart is called "splice" because it takes
a list_head as a parameter and splices that list into the list of filters.
I'd suggest that this one is more like "replace", but up to you.

> +{
> +	unsigned long flags;
> +	void *old_drv_data;
> +
> +	if (!has_drv_config(event))
> +		return;
> +
> +	/* Children take their configuration from their parent */
> +	if (event->parent)
> +		return;
> +
> +	raw_spin_lock_irqsave(&event->drv_config.lock, flags);
> +
> +	old_drv_data = event->drv_config.drv_config;
> +	event->drv_config.drv_config = drv_data;

Now I'm thinking: should we reset the generation here (and also in the
address filters bit)? At least, it deserves a comment.

> +
> +	raw_spin_unlock_irqrestore(&event->drv_config.lock, flags);
> +
> +	event->pmu->drv_config_free(old_drv_data);
> +}
> +
> +static void perf_event_drv_config_apply(struct perf_event *event)
> +{
> +	unsigned long flags;
> +	struct perf_drv_config *drv_config = perf_event_get_drv_config(event);
> +
> +	/* Notify event that a new configuration is available */
> +	raw_spin_lock_irqsave(&drv_config->lock, flags);
> +	event->drv_config_gen++;
> +	raw_spin_unlock_irqrestore(&drv_config->lock, flags);

Should we also mention how this new locks fits into the existing locking
order?

Regards,
--
Alex

Powered by blists - more mailing lists