| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1530703837-24563-8-git-send-email-moshe@mellanox.com>
Date: Wed, 4 Jul 2018 14:30:34 +0300
From: Moshe Shemesh <moshe@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: Vasundhara Volam <vasundhara-v.volam@...adcom.com>,
Jiri Pirko <jiri@...lanox.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Moshe Shemesh <moshe@...lanox.com>
Subject: [PATCH net-next 07/10] mlx4: Add mlx4 initial parameters table and register it
Create initial parameters table for mlx4.
The table consists of two generic parameters and two driver-specific
parameters.
Generic:
internal_err_reset - Enable reset device on internal errors. This
parameter can be configured on mlx4 either on runtime or during driver
initialization.
max_macs - Max number of MACs per ETH port. For mlx4 this parameter
value range is between 1 and 128. This parameter can be configured on
mlx4 only during driver initialization.
Driver specific:
enable_64b_cqe_eqe - Enable 64 byte CQEs/EQEs when the FW supports it.
This parameter can be configured on mlx4 only during driver
initialization.
enable_4k_uar - Enable using 4K UAR. This parameter can be configured on
mlx4 only during driver initialization.
Register the parameters table on mlx4_init_one() and unregister on
mlx4_remove_one().
Signed-off-by: Moshe Shemesh <moshe@...lanox.com>
Signed-off-by: Jiri Pirko <jiri@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx4/main.c | 108 +++++++++++++++++++++++++++++-
1 file changed, 106 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 8720147..2445f79 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -177,6 +177,101 @@ struct mlx4_port_config {
static atomic_t pf_loading = ATOMIC_INIT(0);
+static int mlx4_devlink_ierr_reset_get(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ ctx->val.vbool = !!mlx4_internal_err_reset;
+ return 0;
+}
+
+static int mlx4_devlink_ierr_reset_set(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ mlx4_internal_err_reset = ctx->val.vbool;
+ return 0;
+}
+
+static int
+mlx4_devlink_max_macs_validate(struct devlink *devlink, u32 id,
+ union devlink_param_value val,
+ struct netlink_ext_ack *extack)
+{
+ u32 value = val.vu32;
+
+ if (value < 1 || value > 128)
+ return -ERANGE;
+
+ if (!is_power_of_2(value)) {
+ NL_SET_ERR_MSG_MOD(extack, "max_macs supported must be power of 2");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+enum mlx4_devlink_param_id {
+ MLX4_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
+ MLX4_DEVLINK_PARAM_ID_ENABLE_64B_CQE_EQE,
+ MLX4_DEVLINK_PARAM_ID_ENABLE_4K_UAR,
+};
+
+static const struct devlink_param mlx4_devlink_params[] = {
+ DEVLINK_PARAM_GENERIC(INT_ERR_RESET,
+ BIT(DEVLINK_PARAM_CMODE_RUNTIME) |
+ BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
+ mlx4_devlink_ierr_reset_get,
+ mlx4_devlink_ierr_reset_set, NULL),
+ DEVLINK_PARAM_GENERIC(MAX_MACS,
+ BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
+ NULL, NULL, mlx4_devlink_max_macs_validate),
+ DEVLINK_PARAM_DRIVER(MLX4_DEVLINK_PARAM_ID_ENABLE_64B_CQE_EQE,
+ "enable_64b_cqe_eqe", DEVLINK_PARAM_TYPE_BOOL,
+ BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
+ NULL, NULL, NULL),
+ DEVLINK_PARAM_DRIVER(MLX4_DEVLINK_PARAM_ID_ENABLE_4K_UAR,
+ "enable_4k_uar", DEVLINK_PARAM_TYPE_BOOL,
+ BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
+ NULL, NULL, NULL),
+};
+
+static void mlx4_devlink_set_init_value(struct devlink *devlink, u32 param_id,
+ union devlink_param_value init_val)
+{
+ struct mlx4_priv *priv = devlink_priv(devlink);
+ struct mlx4_dev *dev = &priv->dev;
+ int err;
+
+ err = devlink_param_driverinit_value_set(devlink, param_id, init_val);
+ if (err)
+ mlx4_warn(dev,
+ "devlink set parameter %u value failed (err = %d)",
+ param_id, err);
+}
+
+static void mlx4_devlink_set_params_init_values(struct devlink *devlink)
+{
+ union devlink_param_value value;
+
+ value.vbool = !!mlx4_internal_err_reset;
+ mlx4_devlink_set_init_value(devlink,
+ DEVLINK_PARAM_GENERIC_ID_INT_ERR_RESET,
+ value);
+
+ value.vu32 = 1UL << log_num_mac;
+ mlx4_devlink_set_init_value(devlink,
+ DEVLINK_PARAM_GENERIC_ID_MAX_MACS, value);
+
+ value.vbool = enable_64b_cqe_eqe;
+ mlx4_devlink_set_init_value(devlink,
+ MLX4_DEVLINK_PARAM_ID_ENABLE_64B_CQE_EQE,
+ value);
+
+ value.vbool = enable_4k_uar;
+ mlx4_devlink_set_init_value(devlink,
+ MLX4_DEVLINK_PARAM_ID_ENABLE_4K_UAR,
+ value);
+}
+
static inline void mlx4_set_num_reserved_uars(struct mlx4_dev *dev,
struct mlx4_dev_cap *dev_cap)
{
@@ -3792,14 +3887,21 @@ static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ret = devlink_register(devlink, &pdev->dev);
if (ret)
goto err_persist_free;
-
- ret = __mlx4_init_one(pdev, id->driver_data, priv);
+ ret = devlink_params_register(devlink, mlx4_devlink_params,
+ ARRAY_SIZE(mlx4_devlink_params));
if (ret)
goto err_devlink_unregister;
+ mlx4_devlink_set_params_init_values(devlink);
+ ret = __mlx4_init_one(pdev, id->driver_data, priv);
+ if (ret)
+ goto err_params_unregister;
pci_save_state(pdev);
return 0;
+err_params_unregister:
+ devlink_params_unregister(devlink, mlx4_devlink_params,
+ ARRAY_SIZE(mlx4_devlink_params));
err_devlink_unregister:
devlink_unregister(devlink);
err_persist_free:
@@ -3936,6 +4038,8 @@ static void mlx4_remove_one(struct pci_dev *pdev)
pci_release_regions(pdev);
mlx4_pci_disable_device(dev);
+ devlink_params_unregister(devlink, mlx4_devlink_params,
+ ARRAY_SIZE(mlx4_devlink_params));
devlink_unregister(devlink);
kfree(dev->persist);
devlink_free(devlink);
--
1.8.3.1
Powered by blists - more mailing lists