[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180704115925.28024-4-johnfwhitmore@gmail.com>
Date: Wed, 4 Jul 2018 12:59:24 +0100
From: John Whitmore <johnfwhitmore@...il.com>
To: linux-kernel@...r.kernel.org
Cc: devel@...verdev.osuosl.org, insafonov@...il.com,
baijiaju1990@...il.com, keescook@...omium.org, joe@...ches.com,
colin.king@...onical.com, gregkh@...uxfoundation.org,
John Whitmore <johnfwhitmore@...il.com>
Subject: [PATCH 4/5] staging: rtl8192u: Remove redundant definitions in header
Truncated header file removing definitions which aren't used.
Signed-off-by: John Whitmore <johnfwhitmore@...il.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 117 ------------------
1 file changed, 117 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index a85036022aa8..6abf32b142ef 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -7,21 +7,10 @@
// reassociation request and probe response frames
//------------------------------------------------------------
-//
-// Operation mode value
-//
-#define HT_OPMODE_NO_PROTECT 0
-#define HT_OPMODE_OPTIONAL 1
-#define HT_OPMODE_40MHZ_PROTECT 2
-#define HT_OPMODE_MIXED 3
-
//
// MIMO Power Save Settings
//
#define MIMO_PS_STATIC 0
-#define MIMO_PS_DYNAMIC 1
-#define MIMO_PS_NOLIMIT 3
-
//
// There should be 128 bits to cover all of the MCS rates. However, since
@@ -35,27 +24,6 @@
#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00
#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
-
-typedef enum _HT_MCS_RATE {
- HT_MCS0 = 0x00000001,
- HT_MCS1 = 0x00000002,
- HT_MCS2 = 0x00000004,
- HT_MCS3 = 0x00000008,
- HT_MCS4 = 0x00000010,
- HT_MCS5 = 0x00000020,
- HT_MCS6 = 0x00000040,
- HT_MCS7 = 0x00000080,
- HT_MCS8 = 0x00000100,
- HT_MCS9 = 0x00000200,
- HT_MCS10 = 0x00000400,
- HT_MCS11 = 0x00000800,
- HT_MCS12 = 0x00001000,
- HT_MCS13 = 0x00002000,
- HT_MCS14 = 0x00004000,
- HT_MCS15 = 0x00008000,
- // Do not define MCS32 here although 8190 support MCS32
-} HT_MCS_RATE, *PHT_MCS_RATE;
-
//
// Represent Channel Width in HT Capabilities
//
@@ -120,28 +88,6 @@ typedef union _HT_CAPABILITY_MACPARA{
}HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA;
*/
-typedef enum _HT_ACTION {
- ACT_RECOMMAND_WIDTH = 0,
- ACT_MIMO_PWR_SAVE = 1,
- ACT_PSMP = 2,
- ACT_SET_PCO_PHASE = 3,
- ACT_MIMO_CHL_MEASURE = 4,
- ACT_RECIPROCITY_CORRECT = 5,
- ACT_MIMO_CSI_MATRICS = 6,
- ACT_MIMO_NOCOMPR_STEER = 7,
- ACT_MIMO_COMPR_STEER = 8,
- ACT_ANTENNA_SELECT = 9,
-} HT_ACTION, *PHT_ACTION;
-
-
-/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */
-typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier {
- SC_MODE_DUPLICATE = 0,
- SC_MODE_LOWER = 1,
- SC_MODE_UPPER = 2,
- SC_MODE_FULL40MHZ = 3,
-}HT_BW40_SC_E;
-
typedef struct _HT_CAPABILITY_ELE {
//HT capability info
@@ -212,16 +158,6 @@ typedef struct _HT_INFORMATION_ELE {
u8 BasicMSC[16];
} __attribute__ ((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE;
-//
-// MIMO Power Save control field.
-// This is appear in MIMO Power Save Action Frame
-//
-typedef struct _MIMOPS_CTRL {
- u8 MimoPsEnable:1;
- u8 MimoPsMode:1;
- u8 Reserved:6;
-} MIMOPS_CTRL, *PMIMOPS_CTRL;
-
typedef enum _HT_SPEC_VER {
HT_SPEC_VER_IEEE = 0,
HT_SPEC_VER_EWC = 1,
@@ -342,37 +278,6 @@ typedef struct _RT_HIGH_THROUGHPUT {
u32 IOTAction;
} __attribute__ ((packed)) RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
-
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variable for "each Sta"
-// when card is configured as "AP mode"
-//------------------------------------------------------------
-
-typedef struct _RT_HTINFO_STA_ENTRY {
- u8 bEnableHT;
-
- u8 bSupportCck;
-
- u16 AMSDU_MaxSize;
-
- u8 AMPDU_Factor;
- u8 MPDU_Density;
-
- u8 HTHighestOperaRate;
-
- u8 bBw40MHz;
-
- u8 MimoPs;
-
- u8 McsRateSet[16];
-
-
-}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY;
-
-
-
-
-
//------------------------------------------------------------
// The Data structure is used to keep HT related variable for "each AP"
// when card is configured as "STA mode"
@@ -396,28 +301,6 @@ typedef struct _BSS_HT {
u8 bdRT2RTLongSlotTime;
} __attribute__ ((packed)) BSS_HT, *PBSS_HT;
-typedef struct _MIMO_RSSI {
- u32 EnableAntenna;
- u32 AntennaA;
- u32 AntennaB;
- u32 AntennaC;
- u32 AntennaD;
- u32 Average;
-}MIMO_RSSI, *PMIMO_RSSI;
-
-typedef struct _MIMO_EVM {
- u32 EVM1;
- u32 EVM2;
-}MIMO_EVM, *PMIMO_EVM;
-
-typedef struct _FALSE_ALARM_STATISTICS {
- u32 Cnt_Parity_Fail;
- u32 Cnt_Rate_Illegal;
- u32 Cnt_Crc8_fail;
- u32 Cnt_all;
-}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
-
-
extern u8 MCS_FILTER_ALL[16];
extern u8 MCS_FILTER_1SS[16];
--
2.17.1
Powered by blists - more mailing lists