| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 4 Jul 2018 07:22:22 +0300
From: Mike Rapoport <rppt@...ux.vnet.ibm.com>
To: Greg Ungerer <gerg@...ux-m68k.org>
Cc: Geert Uytterhoeven <geert@...ux-m68k.org>,
Sam Creasey <sammy@...my.net>,
Michal Hocko <mhocko@...nel.org>,
linux-m68k@...ts.linux-m68k.org, linux-mm@...ck.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] m68k: switch to MEMBLOCK + NO_BOOTMEM
On Wed, Jul 04, 2018 at 12:02:52PM +1000, Greg Ungerer wrote:
> Hi Mike,
>
> On 04/07/18 11:39, Greg Ungerer wrote:
> >On 03/07/18 20:29, Mike Rapoport wrote:
> >>In m68k the physical memory is described by [memory_start, memory_end] for
> >>!MMU variant and by m68k_memory array of memory ranges for the MMU version.
> >>This information is directly used to register the physical memory with
> >>memblock.
> >>
> >>The reserve_bootmem() calls are replaced with memblock_reserve() and the
> >>bootmap bitmap allocation is simply dropped.
> >>
> >>Since the MMU variant creates early mappings only for the small part of the
> >>memory we force bottom-up allocations in memblock because otherwise we will
> >>attempt to access memory that not yet mapped
> >>
> >>Signed-off-by: Mike Rapoport <rppt@...ux.vnet.ibm.com>
> >
> >This builds cleanly for me with a m5475_defconfig, but it fails
> >to boot on real hardware. No console, no nothing on startup.
> >I haven't debugged any further yet.
> >
> >The M5475 is a ColdFire with MMU enabled target.
>
> With some early serial debug trace I see:
>
> Linux version 4.18.0-rc3-00003-g109f5e551b18-dirty (gerg@...ber) (gcc version 5.4.0 (GCC)) #5 Wed Jul 4 12:00:03 AEST 2018
> On node 0 totalpages: 4096
> DMA zone: 18 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4096 pages, LIFO batch:0
> pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> pcpu-alloc: [0] 0
> Built 1 zonelists, mobility grouping off. Total pages: 4078
> Kernel command line: root=/dev/mtdblock0
> Dentry cache hash table entries: 4096 (order: 1, 16384 bytes)
> Inode-cache hash table entries: 2048 (order: 0, 8192 bytes)
> Sorting __ex_table...
> Memory: 3032K/32768K available (1489K kernel code, 96K rwdata, 240K rodata, 56K init, 77K bss, 29736K reserved, 0K cma-reserved)
^^^^^^
It seems I was over enthusiastic when I reserved the memory for the kernel.
Can you please try with the below patch:
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index e9e60e1..18c7bf6 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -174,7 +174,7 @@ void __init cf_bootmem_alloc(void)
high_memory = (void *)_ramend;
/* Reserve kernel text/data/bss */
- memblock_reserve(memstart, _ramend - memstart);
+ memblock_reserve(memstart, memstart - _rambase);
m68k_virt_to_node_shift = fls(_ramend - 1) - 6;
module_fixup(NULL, __start_fixup, __stop_fixup);
diff --git a/mm/memblock.c b/mm/memblock.c
index 03d48d8..98661be 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -54,7 +54,7 @@ struct memblock memblock __initdata_memblock = {
.current_limit = MEMBLOCK_ALLOC_ANYWHERE,
};
-int memblock_debug __initdata_memblock;
+int memblock_debug __initdata_memblock = 1;
static bool system_has_some_mirror __initdata_memblock = false;
static int memblock_can_resize __initdata_memblock;
static int memblock_memory_in_slab __initdata_memblock = 0;
The memblock hunk is needed to see early memblock debug messages as all the
setup happens before parsing of the command line.
> SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
> NR_IRQS: 256
> clocksource: slt: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 14370379300 ns
> Calibrating delay loop... 264.19 BogoMIPS (lpj=1320960)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 2048 (order: 0, 8192 bytes)
> Mountpoint-cache hash table entries: 2048 (order: 0, 8192 bytes)
> clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> ColdFire: PCI bus initialization...
> Coldfire: PCI IO/config window mapped to 0xe0000000
> PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
> pci_bus 0000:00: root bus resource [bus 00-ff]
> pci 0000:00:14.0: [8086:1229] type 00 class 0x020000
> pci 0000:00:14.0: reg 0x10: [mem 0x00000000-0x00000fff]
> pci 0000:00:14.0: reg 0x14: [io 0x0000-0x003f]
> pci 0000:00:14.0: reg 0x18: [mem 0x00000000-0x000fffff]
> pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
> pci 0000:00:14.0: supports D1 D2
> pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot
> pci 0000:00:14.0: BAR 2: assigned [mem 0xf0000000-0xf00fffff]
> pci 0000:00:14.0: BAR 6: assigned [mem 0xf0100000-0xf01fffff pref]
> pci 0000:00:14.0: BAR 0: assigned [mem 0xf0200000-0xf0200fff]
> pci 0000:00:14.0: BAR 1: assigned [io 0x0400-0x043f]
> vgaarb: loaded
> clocksource: Switched to clocksource slt
> PCI: CLS 32 bytes, default 16
> workingset: timestamp_bits=27 max_order=9 bucket_order=0
> kobject_add_internal failed for slab (error: -12 parent: kernel)
> Cannot register slab subsystem.
> romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
> io scheduler noop registered (default)
> io scheduler mq-deadline registered
> io scheduler kyber registered
> kobject_add_internal failed for ptyp0 (error: -12 parent: tty)
> Kernel panic - not syncing: Couldn't register pty driver
> CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc3-00003-g109f5e551b18-dirty #5
> Stack from 00283ee4:
> 00283ee4 001bc27a 000287ea 0019075c 00000019 001f5390 0018ba36 002c6a00
> 002c6a80 0014ab82 00148816 001f2c2a 001b948c 00000000 001f2ad0 001f6ce8
> 0002118e 00283f8c 000211b4 00000006 00000019 001f5390 0018ba36 00000007
> 00000000 001f53cc 00305fb0 0002118e 0003df6a 00000000 00000006 00000006
> 00305fb0 00305fb5 001ea7f6 001ba406 00305fb0 001d1c58 00000019 00000006
> 00000006 00000000 0003df6a 001ea804 001f2ad0 00000000 001e5964 00282001
> Call Trace:
> [<000287ea>] 0x000287ea
> [<0019075c>] 0x0019075c
> [<0018ba36>] 0x0018ba36
> [<0014ab82>] 0x0014ab82
> [<00148816>] 0x00148816
>
> [<001f2c2a>] 0x001f2c2a
> [<001f2ad0>] 0x001f2ad0
> [<0002118e>] 0x0002118e
> [<000211b4>] 0x000211b4
> [<0018ba36>] 0x0018ba36
>
> [<0002118e>] 0x0002118e
> [<0003df6a>] 0x0003df6a
> [<001ea7f6>] 0x001ea7f6
> [<0003df6a>] 0x0003df6a
> [<001ea804>] 0x001ea804
>
> [<001f2ad0>] 0x001f2ad0
> [<00190bae>] 0x00190bae
> [<00190bb6>] 0x00190bb6
> [<00190bae>] 0x00190bae
> [<00021aac>] 0x00021aac
>
> ---[ end Kernel panic - not syncing: Couldn't register pty driver ]---
> random: fast init done
>
> Regards
> Greg
>
>
>
> >>---
> >> arch/m68k/Kconfig | 3 +++
> >> arch/m68k/kernel/setup_mm.c | 14 ++++----------
> >> arch/m68k/kernel/setup_no.c | 20 ++++----------------
> >> arch/m68k/mm/init.c | 1 -
> >> arch/m68k/mm/mcfmmu.c | 11 +++++++----
> >> arch/m68k/mm/motorola.c | 35 +++++++++++------------------------
> >> arch/m68k/sun3/config.c | 4 ----
> >> 7 files changed, 29 insertions(+), 59 deletions(-)
> >>
> >>diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
> >>index 785612b..bd7f38a 100644
> >>--- a/arch/m68k/Kconfig
> >>+++ b/arch/m68k/Kconfig
> >>@@ -24,6 +24,9 @@ config M68K
> >> select MODULES_USE_ELF_RELA
> >> select OLD_SIGSUSPEND3
> >> select OLD_SIGACTION
> >>+ select HAVE_MEMBLOCK
> >>+ select ARCH_DISCARD_MEMBLOCK
> >>+ select NO_BOOTMEM
> >> config CPU_BIG_ENDIAN
> >> def_bool y
> >>diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
> >>index f35e3eb..6512955 100644
> >>--- a/arch/m68k/kernel/setup_mm.c
> >>+++ b/arch/m68k/kernel/setup_mm.c
> >>@@ -21,6 +21,7 @@
> >> #include <linux/string.h>
> >> #include <linux/init.h>
> >> #include <linux/bootmem.h>
> >>+#include <linux/memblock.h>
> >> #include <linux/proc_fs.h>
> >> #include <linux/seq_file.h>
> >> #include <linux/module.h>
> >>@@ -165,6 +166,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
> >> be32_to_cpu(m->addr);
> >> m68k_memory[m68k_num_memory].size =
> >> be32_to_cpu(m->size);
> >>+ memblock_add(m68k_memory[m68k_num_memory].addr,
> >>+ m68k_memory[m68k_num_memory].size);
> >> m68k_num_memory++;
> >> } else
> >> pr_warn("%s: too many memory chunks\n",
> >>@@ -224,10 +227,6 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
> >> void __init setup_arch(char **cmdline_p)
> >> {
> >>-#ifndef CONFIG_SUN3
> >>- int i;
> >>-#endif
> >>-
> >> /* The bootinfo is located right after the kernel */
> >> if (!CPU_IS_COLDFIRE)
> >> m68k_parse_bootinfo((const struct bi_record *)_end);
> >>@@ -356,14 +355,9 @@ void __init setup_arch(char **cmdline_p)
> >> #endif
> >> #ifndef CONFIG_SUN3
> >>- for (i = 1; i < m68k_num_memory; i++)
> >>- free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
> >>- m68k_memory[i].size);
> >> #ifdef CONFIG_BLK_DEV_INITRD
> >> if (m68k_ramdisk.size) {
> >>- reserve_bootmem_node(__virt_to_node(phys_to_virt(m68k_ramdisk.addr)),
> >>- m68k_ramdisk.addr, m68k_ramdisk.size,
> >>- BOOTMEM_DEFAULT);
> >>+ memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size);
> >> initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
> >> initrd_end = initrd_start + m68k_ramdisk.size;
> >> pr_info("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
> >>diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
> >>index a98af10..3e8d87a 100644
> >>--- a/arch/m68k/kernel/setup_no.c
> >>+++ b/arch/m68k/kernel/setup_no.c
> >>@@ -28,6 +28,7 @@
> >> #include <linux/errno.h>
> >> #include <linux/string.h>
> >> #include <linux/bootmem.h>
> >>+#include <linux/memblock.h>
> >> #include <linux/seq_file.h>
> >> #include <linux/init.h>
> >> #include <linux/initrd.h>
> >>@@ -86,8 +87,6 @@ void (*mach_power_off)(void);
> >> void __init setup_arch(char **cmdline_p)
> >> {
> >>- int bootmap_size;
> >>-
> >> memory_start = PAGE_ALIGN(_ramstart);
> >> memory_end = _ramend;
> >>@@ -142,6 +141,8 @@ void __init setup_arch(char **cmdline_p)
> >> pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
> >> __bss_stop, memory_start, memory_start, memory_end);
> >>+ memblock_add(memory_start, memory_end - memory_start);
> >>+
> >> /* Keep a copy of command line */
> >> *cmdline_p = &command_line[0];
> >> memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
> >>@@ -158,23 +159,10 @@ void __init setup_arch(char **cmdline_p)
> >> min_low_pfn = PFN_DOWN(memory_start);
> >> max_pfn = max_low_pfn = PFN_DOWN(memory_end);
> >>- bootmap_size = init_bootmem_node(
> >>- NODE_DATA(0),
> >>- min_low_pfn, /* map goes here */
> >>- PFN_DOWN(PAGE_OFFSET),
> >>- max_pfn);
> >>- /*
> >>- * Free the usable memory, we have to make sure we do not free
> >>- * the bootmem bitmap so we then reserve it after freeing it :-)
> >>- */
> >>- free_bootmem(memory_start, memory_end - memory_start);
> >>- reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
> >>-
> >> #if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD)
> >> if ((initrd_start > 0) && (initrd_start < initrd_end) &&
> >> (initrd_end < memory_end))
> >>- reserve_bootmem(initrd_start, initrd_end - initrd_start,
> >>- BOOTMEM_DEFAULT);
> >>+ memblock_reserve(initrd_start, initrd_end - initrd_start);
> >> #endif /* if defined(CONFIG_BLK_DEV_INITRD) */
> >> /*
> >>diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
> >>index 8827b7f..38e2b27 100644
> >>--- a/arch/m68k/mm/init.c
> >>+++ b/arch/m68k/mm/init.c
> >>@@ -71,7 +71,6 @@ void __init m68k_setup_node(int node)
> >> pg_data_table[i] = pg_data_map + node;
> >> }
> >> #endif
> >>- pg_data_map[node].bdata = bootmem_node_data + node;
> >> node_set_online(node);
> >> }
> >>diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
> >>index 2925d79..e9e60e1 100644
> >>--- a/arch/m68k/mm/mcfmmu.c
> >>+++ b/arch/m68k/mm/mcfmmu.c
> >>@@ -14,6 +14,7 @@
> >> #include <linux/init.h>
> >> #include <linux/string.h>
> >> #include <linux/bootmem.h>
> >>+#include <linux/memblock.h>
> >> #include <asm/setup.h>
> >> #include <asm/page.h>
> >>@@ -160,6 +161,8 @@ void __init cf_bootmem_alloc(void)
> >> m68k_memory[0].addr = _rambase;
> >> m68k_memory[0].size = _ramend - _rambase;
> >>+ memblock_add(m68k_memory[0].addr, m68k_memory[0].size);
> >>+
> >> /* compute total pages in system */
> >> num_pages = PFN_DOWN(_ramend - _rambase);
> >>@@ -170,14 +173,14 @@ void __init cf_bootmem_alloc(void)
> >> max_pfn = max_low_pfn = PFN_DOWN(_ramend);
> >> high_memory = (void *)_ramend;
> >>+ /* Reserve kernel text/data/bss */
> >>+ memblock_reserve(memstart, _ramend - memstart);
> >>+
> >> m68k_virt_to_node_shift = fls(_ramend - 1) - 6;
> >> module_fixup(NULL, __start_fixup, __stop_fixup);
> >>- /* setup bootmem data */
> >>+ /* setup node data */
> >> m68k_setup_node(0);
> >>- memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
> >>- min_low_pfn, max_low_pfn);
> >>- free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
> >> }
> >> /*
> >>diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
> >>index e490ecc..4e17ecb 100644
> >>--- a/arch/m68k/mm/motorola.c
> >>+++ b/arch/m68k/mm/motorola.c
> >>@@ -19,6 +19,7 @@
> >> #include <linux/types.h>
> >> #include <linux/init.h>
> >> #include <linux/bootmem.h>
> >>+#include <linux/memblock.h>
> >> #include <linux/gfp.h>
> >> #include <asm/setup.h>
> >>@@ -208,7 +209,7 @@ void __init paging_init(void)
> >> {
> >> unsigned long zones_size[MAX_NR_ZONES] = { 0, };
> >> unsigned long min_addr, max_addr;
> >>- unsigned long addr, size, end;
> >>+ unsigned long addr;
> >> int i;
> >> #ifdef DEBUG
> >>@@ -253,34 +254,20 @@ void __init paging_init(void)
> >> min_low_pfn = availmem >> PAGE_SHIFT;
> >> max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
> >>- for (i = 0; i < m68k_num_memory; i++) {
> >>- addr = m68k_memory[i].addr;
> >>- end = addr + m68k_memory[i].size;
> >>- m68k_setup_node(i);
> >>- availmem = PAGE_ALIGN(availmem);
> >>- availmem += init_bootmem_node(NODE_DATA(i),
> >>- availmem >> PAGE_SHIFT,
> >>- addr >> PAGE_SHIFT,
> >>- end >> PAGE_SHIFT);
> >>- }
> >>+ /* Reserve kernel text/data/bss and the memory allocated in head.S */
> >>+ memblock_reserve(m68k_memory[0].addr, availmem - m68k_memory[0].addr);
> >> /*
> >> * Map the physical memory available into the kernel virtual
> >>- * address space. First initialize the bootmem allocator with
> >>- * the memory we already mapped, so map_node() has something
> >>- * to allocate.
> >>+ * address space. Make sure memblock will not try to allocate
> >>+ * pages beyond the memory we already mapped in head.S
> >> */
> >>- addr = m68k_memory[0].addr;
> >>- size = m68k_memory[0].size;
> >>- free_bootmem_node(NODE_DATA(0), availmem,
> >>- min(m68k_init_mapped_size, size) - (availmem - addr));
> >>- map_node(0);
> >>- if (size > m68k_init_mapped_size)
> >>- free_bootmem_node(NODE_DATA(0), addr + m68k_init_mapped_size,
> >>- size - m68k_init_mapped_size);
> >>-
> >>- for (i = 1; i < m68k_num_memory; i++)
> >>+ memblock_set_bottom_up(true);
> >>+
> >>+ for (i = 0; i < m68k_num_memory; i++) {
> >>+ m68k_setup_node(i);
> >> map_node(i);
> >>+ }
> >> flush_tlb_all();
> >>diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
> >>index 1d28d38..79a2bb8 100644
> >>--- a/arch/m68k/sun3/config.c
> >>+++ b/arch/m68k/sun3/config.c
> >>@@ -123,10 +123,6 @@ static void __init sun3_bootmem_alloc(unsigned long memory_start,
> >> availmem = memory_start;
> >> m68k_setup_node(0);
> >>- availmem += init_bootmem(start_page, num_pages);
> >>- availmem = (availmem + (PAGE_SIZE-1)) & PAGE_MASK;
> >>-
> >>- free_bootmem(__pa(availmem), memory_end - (availmem));
> >> }
> >>
> >--
> >To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
> >the body of a message to majordomo@...r.kernel.org
> >More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
--
Sincerely yours,
Mike.
Powered by blists - more mailing lists