lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180705103919.GB8426@localhost.localdomain>
Date:   Thu, 5 Jul 2018 13:39:19 +0300
From:   Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To:     Lee Jones <lee.jones@...aro.org>
Cc:     mturquette@...libre.com, robh+dt@...nel.org, mark.rutland@....com,
        lgirdwood@...il.com, broonie@...nel.org, mazziesaccount@...il.com,
        arnd@...db.de, dmitry.torokhov@...il.com, sre@...nel.org,
        chenjh@...k-chips.com, andrew.smirnov@...il.com,
        linus.walleij@...aro.org, kstewart@...uxfoundation.org,
        heiko@...ech.de, gregkh@...uxfoundation.org, eballetbo@...il.com,
        sboyd@...nel.org, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-input@...r.kernel.org, mikko.mutanen@...rohmeurope.com,
        heikki.haikola@...rohmeurope.com
Subject: Re: [PATCH v9 2/2] mfd: bd71837: Devicetree bindings for ROHM
 BD71837 PMIC

And thanks again Lee!

On Thu, Jul 05, 2018 at 10:24:44AM +0100, Lee Jones wrote:
> On Thu, 05 Jul 2018, Matti Vaittinen wrote:
> 
> > Document devicetree bindings for ROHM BD71837 PMIC MFD.
> > 
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
> > Reviewed-by: Rob Herring <robh@...nel.org>
> > ---
> >  .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt  | 67 ++++++++++++++++++++++
> >  1 file changed, 67 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
> > new file mode 100644
> > index 000000000000..67f2616288d9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
> > @@ -0,0 +1,67 @@
> > +* ROHM BD71837 Power Management Integrated Circuit bindings
> > +
> > +BD71837MWV is a programmable Power Management IC for powering single-core,
> > +dual-core, and quad-core SoC’s such as NXP-i.MX 8M. It is optimized for
> 
> Nit: s/SOC's/SOCs/

I'll change this.

> > +low BOM cost and compact solution footprint. It integrates 8 Buck
> > +egulators and 7 LDO’s to provide all the power rails required by the SoC and
> 
> Nit: s/LDO's/LDOs/

I'll change this.

> > +the commonly used peripherals.
> > +
> > +Datasheet for PMIC is available at:
> > +https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
> > +
> > +Required properties:
> > + - compatible		: Should be "rohm,bd71837".
> > + - reg			: I2C slave address.
> > + - interrupt-parent	: Phandle to the parent interrupt controller.
> > + - interrupts		: The interrupt line the device is connected to.
> > + - clocks		: The parent clock connected to PMIC. If this is missng
> 
> s/missng/missing/

I'll change this.

> > +			  32768 KHz clock is assumed.
> > + - #clock-cells		: Should be 0
> > + - regulators:		: List of child nodes that specify the regulators
> 
> By your convention, the bottom two entries are missing '.'s.

I'll change this.

> > +			  Please see ../regulator/rohm,bd71837-regulator.txt
> > +
> > +Optional properties:
> > +- clock-output-names	: Should contain name for output clock.
> > +
> > +Example:
> > +
> > +	/* external oscillator node */
> 
> Uppercase character to start a sentence.

I'll change this.

> > +	osc: oscillator {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <1>;
> > +		clock-frequency  = <32768>;
> > +		clock-output-names = "osc";
> > +	};
> > +
> > +	/* PMIC node */
> 
> Is this comment really necessary?  The node is called "pmic".

I'll remove this.

> > +	pmic: pmic@4b {
> > +		compatible = "rohm,bd71837";
> > +		reg = <0x4b>;
> > +		interrupt-parent = <&gpio1>;
> > +		interrupts = <29 GPIO_ACTIVE_LOW>;
> > +		interrupt-names = "irq";
> > +		#clock-cells = <0>;
> > +		clocks = <&osc 0>;
> > +		clock-output-names = "bd71837-32k-out";
> > +
> > +		regulators {
> > +			buck1: BUCK1 {
> > +				regulator-name = "buck1";
> > +				regulator-min-microvolt = <700000>;
> > +				regulator-max-microvolt = <1300000>;
> > +				regulator-boot-on;
> > +				regulator-ramp-delay = <1250>;
> > +			};
> > +			/* ... */
> > +		};
> > +	};
> > +
> > +	/* Clock consumer node */
> > +
> > +	foo@0 {
> > +		compatible = "bar,foo";
> > +		/* ... */
> 
> No need for this line.  Additional properties are always expected.

I'll remove this.

> > +		clock-names = "my-clock";
> > +		clocks = <&pmic>;
> > +	};
> 
> Do you have a real example to give?

For clock consumer? Sorry, no I don't.

Br,
	Matti Vaittinen

> -- 
> Lee Jones [李琼斯]
> Linaro Services Technical Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ