[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180705142319.19583-1-faiz_abbas@ti.com>
Date: Thu, 5 Jul 2018 19:53:13 +0530
From: Faiz Abbas <faiz_abbas@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-clk@...r.kernel.org>
CC: <robh+dt@...nel.org>, <bcousson@...libre.com>, <tony@...mide.com>,
<paul@...an.com>, <t-kristo@...com>, <mark.rutland@....com>,
<faiz_abbas@...com>
Subject: [PATCH v4 0/6] Add MCAN Support for dra76x
The following patches add dts and sysconfig support
for MCAN on TI's dra76 SOCs
Changes in v4:
1. Rebased to latest kernel
2. Using ddata->cfg.syss_mask instead of ddata->cfg.quirks
for checking if poll on reset status is required.
Changes in v3:
1. Added reset functionality to the ti-sysc
driver. This enables me to drop the hwmod
data patch as everything is being done in dt.
2. Dropped ti,hwmods from the dts nodes
3. Fixed the unit address of target-module
and mcan
4. Removed the status="disabled" in dtsi
followed by status="okay" in dts.
Changes in v2:
1. Added Support for mcan in the ti-sysc driver
Also added the target-module node for the same
2. Added clkctrl data for mcan clocks
Faiz Abbas (4):
clk: ti: dra7: Add clkctrl clock data for the mcan clocks
bus: ti-sysc: Add support for using ti-sysc for MCAN on dra76x
bus: ti-sysc: Add support for software reset
ARM: dts: Add generic interconnect target module node for MCAN
Franklin S Cooper Jr (1):
ARM: dts: dra76x: Add MCAN node
Lokesh Vutla (1):
ARM: dts: dra762: Add MCAN clock support
.../devicetree/bindings/bus/ti-sysc.txt | 1 +
arch/arm/boot/dts/dra76-evm.dts | 6 ++
arch/arm/boot/dts/dra76x.dtsi | 64 +++++++++++++++++++
drivers/bus/ti-sysc.c | 57 +++++++++++++++++
drivers/clk/ti/clk-7xx.c | 1 +
include/dt-bindings/bus/ti-sysc.h | 2 +
include/dt-bindings/clock/dra7.h | 1 +
include/linux/platform_data/ti-sysc.h | 1 +
8 files changed, 133 insertions(+)
--
2.17.0
Powered by blists - more mailing lists