[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1530822201-5890-4-git-send-email-agustinv@codeaurora.org>
Date: Thu, 5 Jul 2018 16:23:20 -0400
From: Agustin Vega-Frias <agustinv@...eaurora.org>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-acpi@...r.kernel.org, Will Deacon <will.deacon@....com>,
Mark Rutland <mark.rutland@....com>,
Jeremy Linton <jeremy.linton@....com>,
Catalin Marinas <catalin.marinas@....com>,
Marc Zyngier <marc.zyngier@....com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
"Rafael J. Wysocki" <rafael@...nel.org>
Cc: Phani Pabba <pabba@...eaurora.org>,
Richard Ruigrok <rruigrok@...eaurora.org>,
Vijaya Kilari <vkilari@...eaurora.org>,
Jeff Hugo <jhugo@...eaurora.org>,
Rahul Ramasubramanian <rahulr@...eaurora.org>,
Agustin Vega-Frias <agustin.vega.frias@...il.com>,
Agustin Vega-Frias <agustinv@...eaurora.org>
Subject: [RFC V4 3/4] perf: qcom: Add PC capture support to CPU PMU
PC capture is an IMPLEMENTATION DEFINED extension to the ARMv8 PMUv3 that
allows more precise PC sampling by storing the PC in a separate system
register when an event counter overflow occurs. Reduces skid and allows
sampling when interrupts are disabled (since the PMI is a maskable interrupt
in arm64). Note that there is only one PC capture register so we only
allow one event at a time to use it.
Support for this extension is signaled by the presence of the Falkor or
Saphira PMU device node under a CPU device node in the DSDT ACPI table
containing the u8 _DSD property "qcom,pmu-pcc-support" set to non-zero.
E.g.:
Device (CPU0)
{
Name (_HID, "ACPI0007" /* Processor Device */)
...
Device (PMU0)
{
Name (_HID, "QCOM8150") /* Qualcomm Falkor PMU device */
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"qcom,pmu-pcc-support", 1},
}
})
}
}
Signed-off-by: Agustin Vega-Frias <agustinv@...eaurora.org>
---
arch/arm64/include/asm/perf_event.h | 18 ++
arch/arm64/kernel/perf_event.c | 18 --
drivers/perf/Makefile | 2 +-
drivers/perf/qcom_arm_pmu.c | 398 ++++++++++++++++++++++++++++++++++++
include/linux/perf_event.h | 4 +-
5 files changed, 420 insertions(+), 20 deletions(-)
create mode 100644 drivers/perf/qcom_arm_pmu.c
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
index f9ccc36..76b95a3 100644
--- a/arch/arm64/include/asm/perf_event.h
+++ b/arch/arm64/include/asm/perf_event.h
@@ -24,6 +24,24 @@
#define ARMV8_PMU_COUNTER_MASK (ARMV8_PMU_MAX_COUNTERS - 1)
/*
+ * Perf Events' indices
+ */
+#define ARMV8_IDX_CYCLE_COUNTER 0
+#define ARMV8_IDX_COUNTER0 1
+#define ARMV8_IDX_COUNTER_LAST(cpu_pmu) \
+ (ARMV8_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
+
+/*
+ * ARMv8 low level PMU access
+ */
+
+/*
+ * Perf Event to low level counters mapping
+ */
+#define ARMV8_IDX_TO_COUNTER(x) \
+ (((x) - ARMV8_IDX_COUNTER0) & ARMV8_PMU_COUNTER_MASK)
+
+/*
* Per-CPU PMCR: config reg
*/
#define ARMV8_PMU_PMCR_E (1 << 0) /* Enable all counters */
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 33147aa..81b32fb 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -457,24 +457,6 @@
.attrs = armv8_pmuv3_format_attrs,
};
-/*
- * Perf Events' indices
- */
-#define ARMV8_IDX_CYCLE_COUNTER 0
-#define ARMV8_IDX_COUNTER0 1
-#define ARMV8_IDX_COUNTER_LAST(cpu_pmu) \
- (ARMV8_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
-
-/*
- * ARMv8 low level PMU access
- */
-
-/*
- * Perf Event to low level counters mapping
- */
-#define ARMV8_IDX_TO_COUNTER(x) \
- (((x) - ARMV8_IDX_COUNTER0) & ARMV8_PMU_COUNTER_MASK)
-
static inline u32 armv8pmu_pmcr_read(void)
{
return read_sysreg(pmcr_el0);
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index b3902bd..a61afd9 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -3,7 +3,7 @@ obj-$(CONFIG_ARM_CCI_PMU) += arm-cci.o
obj-$(CONFIG_ARM_CCN) += arm-ccn.o
obj-$(CONFIG_ARM_DSU_PMU) += arm_dsu_pmu.o
obj-$(CONFIG_ARM_PMU) += arm_pmu.o arm_pmu_platform.o
-obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
+obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o qcom_arm_pmu.o
obj-$(CONFIG_HISI_PMU) += hisilicon/
obj-$(CONFIG_QCOM_L2_PMU) += qcom_l2_pmu.o
obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
diff --git a/drivers/perf/qcom_arm_pmu.c b/drivers/perf/qcom_arm_pmu.c
new file mode 100644
index 0000000..5893b4c
--- /dev/null
+++ b/drivers/perf/qcom_arm_pmu.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Qualcomm Technologies CPU PMU IMPLEMENTATION DEFINED extensions support
+ *
+ * Current extensions supported:
+ *
+ * - PC capture (PCC):
+ * Allows more precise PC sampling by storing the PC in a separate system
+ * register when an event counter overflow occurs. Reduces skid and allows
+ * sampling when interrupts are disabled (the PMI is a maskable interrupt
+ * in arm64). Note that there is only one PC capture register so we only
+ * allow one event at a time to use it.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/perf_event.h>
+#include <linux/printk.h>
+#include <linux/types.h>
+
+#include <asm/barrier.h>
+#include <asm/sysreg.h>
+
+#include <linux/perf/arm_pmu.h>
+
+/*
+ * Low-level PCC definitions
+ */
+
+#define PCCPTR_UNAUTH BIT(0)
+#define PCCPTR_PC_MS_SP BIT(55)
+#define PCCPTR_PC_MASK_SP GENMASK_ULL(55,2)
+#define PCCPTR_SIGN_EXT_SP GENMASK_ULL(63,56);
+#define PCC_CPT_PME0 BIT(0)
+#define PCC_CPT_EVENT_EN(x) (PCC_CPT_PME0 << (x))
+#define PCC_CPT_PMOVNEVT0 BIT(16)
+#define PCC_CPT_EVENT_OV(x) (PCC_CPT_PMOVNEVT0 << (x))
+#define QC_EVT_PCC_SHIFT 0
+#define QC_EVT_PCC_MASK GENMASK(QC_EVT_PCC_SHIFT + 1, QC_EVT_PCC_SHIFT)
+#define QC_EVT_PCC(event) \
+ (((event)->attr.config1 & QC_EVT_PCC_MASK) >> QC_EVT_PCC_SHIFT)
+
+struct pcc_ops {
+ /* Retrieve the PC from the IMP DEF pmpccptr_el0 register */
+ void (*read_pmpccptr_el0_pc)(u64 *pc);
+ /* Read/write the IMP DEF pmpccptcr0_el0 register */
+ u64 (*read_pmpccptcr0_el0)(void);
+ void (*write_pmpccptcr0_el0)(u64 val);
+};
+
+static struct arm_pmu *def_ops;
+static const struct pcc_ops *pcc_ops;
+
+/*
+ * Low-level Falkor operations
+ */
+
+static void falkor_read_pmpccptr_el0_pc(u64 *pc)
+{
+ u64 pcc = read_sysreg_s(sys_reg(3, 5, 11, 4, 0));
+
+ /*
+ * Leave pc unchanged if we are not allowed to read the PC
+ * (e.g. if the overflow occurred in secure code)
+ */
+ if (pcc & PCCPTR_UNAUTH)
+ return;
+
+ *pc = pcc;
+}
+
+static void falkor_write_pmpccptcr0_el0(u64 val)
+{
+ write_sysreg_s(val, sys_reg(3, 5, 11, 4, 1));
+}
+
+static u64 falkor_read_pmpccptcr0_el0(void)
+{
+ return read_sysreg_s(sys_reg(3, 5, 11, 4, 1));
+}
+
+static const struct pcc_ops falkor_pcc_ops = {
+ .read_pmpccptr_el0_pc = falkor_read_pmpccptr_el0_pc,
+ .read_pmpccptcr0_el0 = falkor_read_pmpccptcr0_el0,
+ .write_pmpccptcr0_el0 = falkor_write_pmpccptcr0_el0
+};
+
+/*
+ * Low-level Saphira operations
+ */
+
+static void saphira_read_pmpccptr_el0_pc(u64 *pc)
+{
+ u64 pcc = read_sysreg_s(sys_reg(3, 5, 11, 5, 0));
+
+ /*
+ * Leave pc unchanged if we are not allowed to read the PC
+ * (e.g. if the overflow occurred in secure code)
+ */
+ if (pcc & PCCPTR_UNAUTH)
+ return;
+
+ *pc = pcc & PCCPTR_PC_MASK_SP;
+ /* In Saphira we need to sign extend */
+ if (pcc & PCCPTR_PC_MS_SP)
+ *pc |= PCCPTR_SIGN_EXT_SP;
+}
+
+static void saphira_write_pmpccptcr0_el0(u64 val)
+{
+ write_sysreg_s(val, sys_reg(3, 5, 11, 5, 1));
+}
+
+static u64 saphira_read_pmpccptcr0_el0(void)
+{
+ return read_sysreg_s(sys_reg(3, 5, 11, 5, 1));
+}
+
+static const struct pcc_ops saphira_pcc_ops = {
+ .read_pmpccptr_el0_pc = saphira_read_pmpccptr_el0_pc,
+ .read_pmpccptcr0_el0 = saphira_read_pmpccptcr0_el0,
+ .write_pmpccptcr0_el0 = saphira_write_pmpccptcr0_el0
+};
+
+/*
+ * Check if the given event uses PCC
+ */
+static bool has_pcc(struct perf_event *event)
+{
+ /* PCC not enabled */
+ if (!pcc_ops)
+ return false;
+
+ /* PCC only used for sampling events */
+ if (!is_sampling_event(event))
+ return false;
+
+ /*
+ * PCC only used without callchain because software callchain might
+ * provide misleading entries
+ */
+ if (event->attr.sample_type & PERF_SAMPLE_CALLCHAIN)
+ return false;
+
+ return QC_EVT_PCC(event);
+}
+
+/*
+ * Check if the given event is for the raw or dynamic PMU type
+ */
+static inline bool is_raw_or_dynamic(struct perf_event *event)
+{
+ int type = event->attr.type;
+
+ return (type == PERF_TYPE_RAW) || (type == event->pmu->type);
+}
+
+/*
+ * Check if e1 and e2 conflict with each other
+ *
+ * e1 is an event that has extensions and we are checking against e2.
+ */
+static inline bool events_conflict(struct perf_event *e1, struct perf_event *e2)
+{
+ int type = e2->attr.type;
+ int dynamic = e1->pmu->type;
+
+ /* Same event? */
+ if (e1 == e2)
+ return false;
+
+ /* Other PMU that is not the RAW or this PMU's dynamic type? */
+ if ((e1->pmu != e2->pmu) && (type != PERF_TYPE_RAW) && (type != dynamic))
+ return false;
+
+ /* No conflict if using different pcc or if pcc is not enabled */
+ if (pcc_ops && is_sampling_event(e2) && (QC_EVT_PCC(e1) == QC_EVT_PCC(e2))) {
+ pr_debug_ratelimited("PCC exclusion: conflicting events %llx %llx\n",
+ e1->attr.config,
+ e2->attr.config);
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * Handle a PCC event overflow
+ *
+ * No extra checks needed here since we do all of that during map, event_idx,
+ * and enable. We only let one PCC event per-CPU pass-through to this.
+ */
+static void pcc_overflow_handler(struct perf_event *event,
+ struct perf_sample_data *data,
+ struct pt_regs *regs)
+{
+ u64 irq_pc = regs->pc;
+
+ /* Override with hardware PC */
+ pcc_ops->read_pmpccptr_el0_pc(®s->pc);
+
+ /* Let the original handler finish the operation */
+ event->orig_overflow_handler(event, data, regs);
+
+ /* Restore */
+ regs->pc = irq_pc;
+}
+
+/*
+ * Check if the given event is valid for the PMU and if so return the value
+ * that can be used in PMXEVTYPER_EL0 to select the event
+ */
+static int qcom_arm_pmu_map_event(struct perf_event *event)
+{
+ if (is_raw_or_dynamic(event) && has_pcc(event)) {
+ struct perf_event *leader;
+ struct perf_event *sibling;
+
+ /* Check if the event is compatible with its group */
+ leader = event->group_leader;
+ if (events_conflict(event, leader))
+ return -ENOENT;
+
+ for_each_sibling_event(sibling, leader)
+ if (events_conflict(event, sibling))
+ return -ENOENT;
+ }
+
+ return def_ops->map_event(event);
+}
+
+/*
+ * Find a slot for the event on the current CPU
+ */
+static int qcom_arm_pmu_get_event_idx(struct pmu_hw_events *cpuc, struct perf_event *event)
+{
+ int idx;
+
+ if (is_raw_or_dynamic(event) && has_pcc(event)) {
+ struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+ int idx;
+
+ /* Check for conflicts with existing events */
+ for_each_set_bit(idx, cpuc->used_mask, ARMPMU_MAX_HWEVENTS)
+ if (cpuc->events[idx] &&
+ events_conflict(event, cpuc->events[idx]))
+ return -ENOENT;
+
+ /*
+ * PCC is requested for this event so we need to use an event
+ * counter even for the cycle counter (PCC does not work with
+ * the dedicated cycle counter).
+ */
+ for (idx = ARMV8_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+
+ /* Let the original op handle the rest */
+ idx = def_ops->get_event_idx(cpuc, event);
+
+ /*
+ * This is called for actually allocating the events, but also with
+ * a dummy pmu_hw_events when validating groups, for that case we
+ * need to ensure that cpuc->events[idx] is NULL so we don't use
+ * an uninitialized pointer. Conflicts for matrix events in groups
+ * are checked during event mapping anyway (see falkor_event_map).
+ */
+ cpuc->events[idx] = NULL;
+
+ return idx;
+}
+
+/*
+ * Enable the given event
+ */
+static void qcom_arm_pmu_enable(struct perf_event *event)
+{
+ if (has_pcc(event)) {
+ int idx = event->hw.idx;
+ u32 pcc = PCC_CPT_EVENT_EN(ARMV8_IDX_TO_COUNTER(idx)) |
+ PCC_CPT_EVENT_OV(ARMV8_IDX_TO_COUNTER(idx));
+
+ pcc_ops->write_pmpccptcr0_el0(pcc);
+ event->orig_overflow_handler = READ_ONCE(event->overflow_handler);
+ WRITE_ONCE(event->overflow_handler, pcc_overflow_handler);
+ }
+
+ /* Let the original op handle the rest */
+ def_ops->enable(event);
+}
+
+/*
+ * Disable the given event
+ */
+static void qcom_arm_pmu_disable(struct perf_event *event)
+{
+ /* Use the original op to disable the counter and interrupt */
+ def_ops->enable(event);
+
+ if (has_pcc(event)) {
+ int idx = event->hw.idx;
+ u32 pcc = pcc_ops->read_pmpccptcr0_el0();
+
+ pcc &= ~(PCC_CPT_EVENT_EN(ARMV8_IDX_TO_COUNTER(idx)) |
+ PCC_CPT_EVENT_OV(ARMV8_IDX_TO_COUNTER(idx)));
+ pcc_ops->write_pmpccptcr0_el0(pcc);
+ if (event->orig_overflow_handler)
+ WRITE_ONCE(event->overflow_handler, event->orig_overflow_handler);
+ }
+}
+
+PMU_FORMAT_ATTR(event, "config:0-15");
+PMU_FORMAT_ATTR(pcc, "config1:0");
+
+static struct attribute *pmu_formats[] = {
+ &format_attr_event.attr,
+ &format_attr_pcc.attr,
+ NULL,
+};
+
+static struct attribute_group pmu_format_attr_group = {
+ .name = "format",
+ .attrs = pmu_formats,
+};
+
+static inline bool pcc_supported(struct device *dev)
+{
+ u8 pcc = 0;
+
+ acpi_node_prop_read(dev->fwnode, "qcom,pmu-pcc-support",
+ DEV_PROP_U8, &pcc, 1);
+ return pcc != 0;
+}
+
+static int qcom_pmu_init(struct arm_pmu *pmu, struct device *dev)
+{
+ /* Save base arm_pmu so we can invoke its ops when appropriate */
+ def_ops = devm_kmemdup(dev, pmu, sizeof(*def_ops), GFP_KERNEL);
+ if (!def_ops) {
+ pr_warn("Failed to allocate arm_pmu for QCOM extensions");
+ return -ENODEV;
+ }
+
+ pmu->name = "qcom_pmuv3";
+
+ /* Override the necessary ops */
+ pmu->map_event = qcom_arm_pmu_map_event;
+ pmu->get_event_idx = qcom_arm_pmu_get_event_idx;
+ pmu->enable = qcom_arm_pmu_enable;
+ pmu->disable = qcom_arm_pmu_disable;
+
+ /* Override the necessary attributes */
+ pmu->pmu.attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+ &pmu_format_attr_group;
+
+ return 1;
+}
+
+static int qcom_falkor_pmu_init(struct arm_pmu *pmu, struct device *dev)
+{
+ if (pcc_supported(dev))
+ pcc_ops = &falkor_pcc_ops;
+ else
+ return -ENODEV;
+
+ return qcom_pmu_init(pmu, dev);
+}
+
+static int qcom_saphira_pmu_init(struct arm_pmu *pmu, struct device *dev)
+{
+ if (pcc_supported(dev))
+ pcc_ops = &saphira_pcc_ops;
+ else
+ return -ENODEV;
+
+ return qcom_pmu_init(pmu, dev);
+}
+
+ACPI_DECLARE_PMU_VARIANT(qcom_falkor, "QCOM8150", qcom_falkor_pmu_init);
+ACPI_DECLARE_PMU_VARIANT(qcom_saphira, "QCOM8151", qcom_saphira_pmu_init);
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 1fa1288..ae204d1 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -677,8 +677,10 @@ struct perf_event {
u64 (*clock)(void);
perf_overflow_handler_t overflow_handler;
void *overflow_handler_context;
-#ifdef CONFIG_BPF_SYSCALL
+#if defined(CONFIG_BPF_SYSCALL) || defined(CONFIG_ARM_PMU_ACPI)
perf_overflow_handler_t orig_overflow_handler;
+#endif
+#ifdef CONFIG_BPF_SYSCALL
struct bpf_prog *prog;
#endif
--
Qualcomm Datacenter Technologies, Inc. on behalf of the Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
Powered by blists - more mailing lists