linux-kernel - [PATCH v2 2/9] phy: sun4i-usb: add support for H6 USB2 PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180706153805.25842-3-icenowy@aosc.io>
Date:   Fri,  6 Jul 2018 23:37:58 +0800
From:   Icenowy Zheng <icenowy@...c.io>
To:     Rob Herring <robh+dt@...nel.org>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Kishon Vijay Abraham I <kishon@...com>
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
        Icenowy Zheng <icenowy@...c.io>
Subject: [PATCH v2 2/9] phy: sun4i-usb: add support for H6 USB2 PHY

The USB 2.0 PHY on Allwinner H6 SoC is similar to older Allwinner SoCs,
with some USB0 quirk like A83T and PHY index 1/2 missing.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@...c.io>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 881078ff73f6..ae16854a770a 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -115,6 +115,7 @@ enum sun4i_usb_phy_type {
 	sun8i_r40_phy,
 	sun8i_v3s_phy,
 	sun50i_a64_phy,
+	sun50i_h6_phy,
 };
 
 struct sun4i_usb_phy_cfg {
@@ -295,7 +296,8 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 		return ret;
 	}
 
-	if (data->cfg->type == sun8i_a83t_phy) {
+	if (data->cfg->type == sun8i_a83t_phy ||
+	    data->cfg->type == sun50i_h6_phy) {
 		if (phy->index == 0) {
 			val = readl(data->base + data->cfg->phyctl_offset);
 			val |= PHY_CTL_VBUSVLDEXT;
@@ -344,7 +346,8 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
 	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 
 	if (phy->index == 0) {
-		if (data->cfg->type == sun8i_a83t_phy) {
+		if (data->cfg->type == sun8i_a83t_phy ||
+		    data->cfg->type == sun50i_h6_phy) {
 			void __iomem *phyctl = data->base +
 				data->cfg->phyctl_offset;
 
@@ -959,6 +962,17 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
 	.phy0_dual_route = true,
 };
 
+static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
+	.num_phys = 4,
+	.type = sun50i_h6_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.enable_pmu_unk1 = true,
+	.phy0_dual_route = true,
+	.missing_phys = BIT(1) | BIT(2),
+};
+
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -972,6 +986,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
+	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-- 
2.17.1