[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180706053552.11438-3-daniel@zonque.org>
Date: Fri, 6 Jul 2018 07:35:49 +0200
From: Daniel Mack <daniel@...que.org>
To: zbr@...emap.net, robh+dt@...nel.org, mark.rutland@....com,
szabolcs.gyurko@....hu
Cc: sre@...nel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
robert.jarzmik@...e.fr, Daniel Mack <daniel@...que.org>
Subject: [PATCH v4 2/5] dt-bindings: w1: document bindings for ds2760 battery monitor
This patch adds the devicetree bindings for Maxim's ds2760 battery
monitors.
Signed-off-by: Daniel Mack <daniel@...que.org>
---
.../bindings/power/supply/maxim,ds2760.txt | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
new file mode 100644
index 000000000000..55967a0bee11
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
@@ -0,0 +1,26 @@
+Devicetree bindings for Maxim DS2760
+====================================
+
+The ds2760 is a w1 slave device and must hence have its sub-node in DT
+under a w1 bus master node.
+
+The device exposes a power supply, so the details described in
+Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
+
+Required properties:
+- compatible: must be "maxim,ds2760"
+
+Optional properties:
+- power-supplies: Refers to one or more power supplies connected to
+ this battery.
+- maxim,pmod-enabled: This boolean property enables the DS2760 to enter
+ sleep mode when the DQ line goes low for greater
+ than 2 seconds and leave sleep Mode when the DQ
+ line goes high.
+- maxim,cache-time-ms: Time im milliseconds to cache the data for. When
+ this time expires, the values are read again from
+ the hardware. Defaults to 1000.
+- rated-capacity-microamp-hours:
+ The rated capacity of the battery, in mAh.
+ If not specified, the value stored in the
+ non-volatile chip memory is used.
--
2.17.1
Powered by blists - more mailing lists