| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6fb6f123-baab-5e42-425e-814e595a9cea@roeck-us.net>
Date: Sun, 8 Jul 2018 16:01:23 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Shilpasri G Bhat <shilpa.bhat@...ux.vnet.ibm.com>,
mpe@...erman.id.au
Cc: linuxppc-dev@...ts.ozlabs.org, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org, ego@...ux.vnet.ibm.com
Subject: Re: [PATCH v4 2/3] hwmon: ibmpowernv: Add attributes to
enable/disable sensor groups
On 07/06/2018 04:56 AM, Shilpasri G Bhat wrote:
> On-Chip-Controller(OCC) is an embedded micro-processor in POWER9 chip
> which measures various system and chip level sensors. These sensors
> comprises of environmental sensors (like power, temperature, current
> and voltage) and performance sensors (like utilization, frequency).
> All these sensors are copied to main memory at a regular interval of
> 100ms. OCC provides a way to select a group of sensors that is copied
> to the main memory to increase the update frequency of selected sensor
> groups. When a sensor-group is disabled, OCC will not copy it to main
> memory and those sensors read 0 values.
>
> This patch provides support for enabling/disabling the sensor groups
> like power, temperature, current and voltage. This patch adds new
> per-senor sysfs attribute to disable and enable them.
>
> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@...ux.vnet.ibm.com>
I assume this will be merged through some powerpc tree since it depends
on patch 1/3. With that in mind,
Acked-by: Guenter Roeck <linux@...ck-us.net>
> ---
> Changes from v3:
> - Add 'enable' attribute for each sensor sub-group
>
> Documentation/hwmon/ibmpowernv | 43 +++++++-
> drivers/hwmon/ibmpowernv.c | 225 +++++++++++++++++++++++++++++++++++------
> 2 files changed, 234 insertions(+), 34 deletions(-)
>
> diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv
> index 8826ba2..5646825 100644
> --- a/Documentation/hwmon/ibmpowernv
> +++ b/Documentation/hwmon/ibmpowernv
> @@ -33,9 +33,48 @@ fanX_input Measured RPM value.
> fanX_min Threshold RPM for alert generation.
> fanX_fault 0: No fail condition
> 1: Failing fan
> +
> tempX_input Measured ambient temperature.
> tempX_max Threshold ambient temperature for alert generation.
> -inX_input Measured power supply voltage
> +tempX_highest Historical maximum temperature
> +tempX_lowest Historical minimum temperature
[ You are sneaking those in. Just letting you know that I noticed. ]
> +tempX_enable Enable/disable all temperature sensors belonging to the
> + sub-group. In POWER9, this attribute corresponds to
> + each OCC. Using this attribute each OCC can be asked to
> + disable/enable all of its temperature sensors.
> + 1: Enable
> + 0: Disable
> +
> +inX_input Measured power supply voltage (millivolt)
> inX_fault 0: No fail condition.
> 1: Failing power supply.
> -power1_input System power consumption (microWatt)
> +inX_highest Historical maximum voltage
> +inX_lowest Historical minimum voltage
> +inX_enable Enable/disable all voltage sensors belonging to the
> + sub-group. In POWER9, this attribute corresponds to
> + each OCC. Using this attribute each OCC can be asked to
> + disable/enable all of its voltage sensors.
> + 1: Enable
> + 0: Disable
> +
> +powerX_input Power consumption (microWatt)
> +powerX_input_highest Historical maximum power
> +powerX_input_lowest Historical minimum power
> +powerX_enable Enable/disable all power sensors belonging to the
> + sub-group. In POWER9, this attribute corresponds to
> + each OCC. Using this attribute each OCC can be asked to
> + disable/enable all of its power sensors.
> + 1: Enable
> + 0: Disable
> +
> +currX_input Measured current (milliampere)
> +currX_highest Historical maximum current
> +currX_lowest Historical minimum current
> +currX_enable Enable/disable all current sensors belonging to the
> + sub-group. In POWER9, this attribute corresponds to
> + each OCC. Using this attribute each OCC can be asked to
> + disable/enable all of its current sensors.
> + 1: Enable
> + 0: Disable
> +
> +energyX_input Cumulative energy (microJoule)
> diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
> index f829dad..33cf7d2 100644
> --- a/drivers/hwmon/ibmpowernv.c
> +++ b/drivers/hwmon/ibmpowernv.c
> @@ -90,11 +90,23 @@ struct sensor_data {
> char label[MAX_LABEL_LEN];
> char name[MAX_ATTR_LEN];
> struct device_attribute dev_attr;
> + struct sensor_group_data *sgdata;
> +};
> +
> +struct sensor_group_data {
> + struct mutex mutex;
> + const __be32 *phandles;
> + u32 gid;
> + u32 nr_phandle;
> + enum sensors type;
> + bool enable;
> };
>
> struct platform_data {
> const struct attribute_group *attr_groups[MAX_SENSOR_TYPE + 1];
> + struct sensor_group_data *sg_data;
> u32 sensors_count; /* Total count of sensors from each group */
> + u32 nr_sensor_groups; /* Total number of sensor sub-groups */
> };
>
> static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
> @@ -105,6 +117,9 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
> ssize_t ret;
> u64 x;
>
> + if (sdata->sgdata && !sdata->sgdata->enable)
> + return -ENODATA;
> +
> ret = opal_get_sensor_data_u64(sdata->id, &x);
>
> if (ret)
> @@ -120,6 +135,46 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
> return sprintf(buf, "%llu\n", x);
> }
>
> +static ssize_t show_enable(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct sensor_data *sdata = container_of(devattr, struct sensor_data,
> + dev_attr);
> +
> + return sprintf(buf, "%u\n", sdata->sgdata->enable);
> +}
> +
> +static ssize_t store_enable(struct device *dev,
> + struct device_attribute *devattr,
> + const char *buf, size_t count)
> +{
> + struct sensor_data *sdata = container_of(devattr, struct sensor_data,
> + dev_attr);
> + struct sensor_group_data *sg = sdata->sgdata;
> + bool data;
> + int ret;
> +
> + ret = kstrtobool(buf, &data);
> + if (ret)
> + return ret;
> +
> + ret = mutex_lock_interruptible(&sg->mutex);
> + if (ret)
> + return ret;
> +
> + if (data != sg->enable) {
> + ret = sensor_group_enable(sg->gid, data);
> + if (!ret)
> + sg->enable = data;
> + }
> +
> + if (!ret)
> + ret = count;
> +
> + mutex_unlock(&sg->mutex);
> + return ret;
> +}
> +
> static ssize_t show_label(struct device *dev, struct device_attribute *devattr,
> char *buf)
> {
> @@ -292,12 +347,99 @@ static u32 get_sensor_hwmon_index(struct sensor_data *sdata,
> return ++sensor_groups[sdata->type].hwmon_index;
> }
>
> +static int init_sensor_group_data(struct platform_device *pdev,
> + struct platform_data *pdata)
> +{
> + struct sensor_group_data *sg_data;
> + struct device_node *groups, *sg;
> + enum sensors type;
> + int count = 0, ret = 0;
> +
> + groups = of_find_node_by_path("/ibm,opal/sensor-groups");
> + if (!groups)
> + return ret;
> +
> + for_each_child_of_node(groups, sg) {
> + type = get_sensor_type(sg);
> + if (type != MAX_SENSOR_TYPE)
> + pdata->nr_sensor_groups++;
> + }
> +
> + if (!pdata->nr_sensor_groups)
> + goto out;
> +
> + sg_data = devm_kcalloc(&pdev->dev, pdata->nr_sensor_groups,
> + sizeof(*sg_data), GFP_KERNEL);
> + if (!sg_data) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + for_each_child_of_node(groups, sg) {
> + const __be32 *phandles;
> + int len, gid;
> +
> + type = get_sensor_type(sg);
> + if (type == MAX_SENSOR_TYPE)
> + continue;
> +
> + if (of_property_read_u32(sg, "sensor-group-id", &gid))
> + continue;
> +
> + phandles = of_get_property(sg, "sensors", &len);
> + if (!phandles)
> + continue;
> +
> + len /= sizeof(u32);
> + if (!len)
> + continue;
> +
> + sensor_groups[type].attr_count++;
> + sg_data[count].gid = gid;
> + sg_data[count].type = type;
> + sg_data[count].nr_phandle = len;
> + sg_data[count].phandles = phandles;
> + mutex_init(&sg_data[count].mutex);
> + sg_data[count++].enable = false;
> + }
> + pdata->sg_data = sg_data;
> +out:
> + of_node_put(groups);
> + return ret;
> +}
> +
> +static struct sensor_group_data *get_sensor_group(struct platform_data *pdata,
> + struct device_node *np,
> + enum sensors type)
> +{
> + struct sensor_group_data *sg_data = pdata->sg_data;
> + int i, j;
> +
> + for (i = 0; i < pdata->nr_sensor_groups; i++) {
> + const __be32 *phandles = sg_data[i].phandles;
> +
> + if (type != sg_data[i].type)
> + continue;
> +
> + for (j = 0; j < sg_data[i].nr_phandle; j++)
> + if (be32_to_cpu(phandles[j]) == np->phandle)
> + return &sg_data[i];
> + }
> +
> + return NULL;
> +}
> +
> static int populate_attr_groups(struct platform_device *pdev)
> {
> struct platform_data *pdata = platform_get_drvdata(pdev);
> const struct attribute_group **pgroups = pdata->attr_groups;
> struct device_node *opal, *np;
> enum sensors type;
> + int ret;
> +
> + ret = init_sensor_group_data(pdev, pdata);
> + if (ret)
> + return ret;
>
> opal = of_find_node_by_path("/ibm,opal/sensors");
> for_each_child_of_node(opal, np) {
> @@ -344,7 +486,10 @@ static int populate_attr_groups(struct platform_device *pdev)
> static void create_hwmon_attr(struct sensor_data *sdata, const char *attr_name,
> ssize_t (*show)(struct device *dev,
> struct device_attribute *attr,
> - char *buf))
> + char *buf),
> + ssize_t (*store)(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count))
> {
> snprintf(sdata->name, MAX_ATTR_LEN, "%s%d_%s",
> sensor_groups[sdata->type].name, sdata->hwmon_index,
> @@ -352,23 +497,33 @@ static void create_hwmon_attr(struct sensor_data *sdata, const char *attr_name,
>
> sysfs_attr_init(&sdata->dev_attr.attr);
> sdata->dev_attr.attr.name = sdata->name;
> - sdata->dev_attr.attr.mode = S_IRUGO;
> sdata->dev_attr.show = show;
> + if (store) {
> + sdata->dev_attr.store = store;
> + sdata->dev_attr.attr.mode = 0664;
> + } else {
> + sdata->dev_attr.attr.mode = 0444;
> + }
> }
>
> static void populate_sensor(struct sensor_data *sdata, int od, int hd, int sid,
> const char *attr_name, enum sensors type,
> const struct attribute_group *pgroup,
> + struct sensor_group_data *sgdata,
> ssize_t (*show)(struct device *dev,
> struct device_attribute *attr,
> - char *buf))
> + char *buf),
> + ssize_t (*store)(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count))
> {
> sdata->id = sid;
> sdata->type = type;
> sdata->opal_index = od;
> sdata->hwmon_index = hd;
> - create_hwmon_attr(sdata, attr_name, show);
> + create_hwmon_attr(sdata, attr_name, show, store);
> pgroup->attrs[sensor_groups[type].attr_count++] = &sdata->dev_attr.attr;
> + sdata->sgdata = sgdata;
> }
>
> static char *get_max_attr(enum sensors type)
> @@ -403,24 +558,23 @@ static int create_device_attrs(struct platform_device *pdev)
> const struct attribute_group **pgroups = pdata->attr_groups;
> struct device_node *opal, *np;
> struct sensor_data *sdata;
> - u32 sensor_id;
> - enum sensors type;
> u32 count = 0;
> - int err = 0;
> + u32 group_attr_id[MAX_SENSOR_TYPE] = {0};
>
> - opal = of_find_node_by_path("/ibm,opal/sensors");
> sdata = devm_kcalloc(&pdev->dev,
> pdata->sensors_count, sizeof(*sdata),
> GFP_KERNEL);
> - if (!sdata) {
> - err = -ENOMEM;
> - goto exit_put_node;
> - }
> + if (!sdata)
> + return -ENOMEM;
>
> + opal = of_find_node_by_path("/ibm,opal/sensors");
> for_each_child_of_node(opal, np) {
> + struct sensor_group_data *sgdata;
> const char *attr_name;
> - u32 opal_index;
> + u32 opal_index, hw_id;
> + u32 sensor_id;
> const char *label;
> + enum sensors type;
>
> if (np->name == NULL)
> continue;
> @@ -456,14 +610,12 @@ static int create_device_attrs(struct platform_device *pdev)
> opal_index = INVALID_INDEX;
> }
>
> - sdata[count].opal_index = opal_index;
> - sdata[count].hwmon_index =
> - get_sensor_hwmon_index(&sdata[count], sdata, count);
> -
> - create_hwmon_attr(&sdata[count], attr_name, show_sensor);
> -
> - pgroups[type]->attrs[sensor_groups[type].attr_count++] =
> - &sdata[count++].dev_attr.attr;
> + hw_id = get_sensor_hwmon_index(&sdata[count], sdata, count);
> + sgdata = get_sensor_group(pdata, np, type);
> + populate_sensor(&sdata[count], opal_index, hw_id, sensor_id,
> + attr_name, type, pgroups[type], sgdata,
> + show_sensor, NULL);
> + count++;
>
> if (!of_property_read_string(np, "label", &label)) {
> /*
> @@ -474,35 +626,43 @@ static int create_device_attrs(struct platform_device *pdev)
> */
>
> make_sensor_label(np, &sdata[count], label);
> - populate_sensor(&sdata[count], opal_index,
> - sdata[count - 1].hwmon_index,
> + populate_sensor(&sdata[count], opal_index, hw_id,
> sensor_id, "label", type, pgroups[type],
> - show_label);
> + NULL, show_label, NULL);
> count++;
> }
>
> if (!of_property_read_u32(np, "sensor-data-max", &sensor_id)) {
> attr_name = get_max_attr(type);
> - populate_sensor(&sdata[count], opal_index,
> - sdata[count - 1].hwmon_index,
> + populate_sensor(&sdata[count], opal_index, hw_id,
> sensor_id, attr_name, type,
> - pgroups[type], show_sensor);
> + pgroups[type], sgdata, show_sensor,
> + NULL);
> count++;
> }
>
> if (!of_property_read_u32(np, "sensor-data-min", &sensor_id)) {
> attr_name = get_min_attr(type);
> - populate_sensor(&sdata[count], opal_index,
> - sdata[count - 1].hwmon_index,
> + populate_sensor(&sdata[count], opal_index, hw_id,
> sensor_id, attr_name, type,
> - pgroups[type], show_sensor);
> + pgroups[type], sgdata, show_sensor,
> + NULL);
> + count++;
> + }
> +
> + if (sgdata && !sgdata->enable) {
> + sgdata->enable = true;
> + hw_id = ++group_attr_id[type];
> + populate_sensor(&sdata[count], opal_index, hw_id,
> + sgdata->gid, "enable", type,
> + pgroups[type], sgdata, show_enable,
> + store_enable);
> count++;
> }
> }
>
> -exit_put_node:
> of_node_put(opal);
> - return err;
> + return 0;
> }
>
> static int ibmpowernv_probe(struct platform_device *pdev)
> @@ -517,6 +677,7 @@ static int ibmpowernv_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, pdata);
> pdata->sensors_count = 0;
> + pdata->nr_sensor_groups = 0;
> err = populate_attr_groups(pdev);
> if (err)
> return err;
>
Powered by blists - more mailing lists