Message-ID: <536642654ca55f08877497c86a5cb106d5458384.camel@collabora.com>
Date:   Mon, 09 Jul 2018 19:04:12 -0300
From:   Ezequiel Garcia <ezequiel@...labora.com>
To:     Enric Balletbo i Serra <enric.balletbo@...labora.com>,
        linux-kernel@...r.kernel.org
Cc:     briannorris@...omium.org, kernel@...labora.com, heiko@...ech.de,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-usb@...r.kernel.org, Felipe Balbi <balbi@...nel.org>,
        "mailto:devicetree"@vger.kernel.org
Subject: Re: [PATCH] usb: dwc3: of-simple: reset host controller at
 suspend/resume

(Cc devicetree folks)

Hi Enric,

Thanks for the patch.

On Mon, 2018-07-09 at 17:08 +0200, Enric Balletbo i Serra wrote:
> If we power off the SoC logic rail in S3, we can find that the Type-C
> PHY can't initialize correctly after system resume. We need to toggle
> the USB3-OTG reset before trying to initialize the PHY, or else it
> times out.
> 
>     phy phy-ff800000.phy.9: phy poweron failed --> -110
>     dwc3 fe900000.dwc3: failed to initialize core
>     dwc3: probe of fe900000.dwc3 failed with error -110
> 
> Note that the RK3399 TRM suggests that we should keep the whole usb3
> controller in reset for the duration of the Type-C PHY
> initialization.
> However, it's hard to assert the reset in the current framework of
> reset. We're still skeptical about that, and we haven't yet found a
> case where this seems to have mattered. This approach is much easier,
> it
> simply holds the USB3-OTG reset while device is supended.
> 
> The dwc3 core is going to reinitialize the controller at
> suspend/resume
> anyway (including a "soft reset"), so it should be safe to do this.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
> ---
> Dear all,
> 
> Now that the usb3-phy otg port support for rk3399 has been merged [1]
> we
> found that suspend/resume is broken. The problem is well known for
> ChromeOS kernels, they solved it in a similar way adding a reset
> pulse on
> resume in the specific usb glue layer (dwc3-rockchip). In mainline,
> though, we use the dwc3-of-simple glue layer instead of a specific
> layer
> for rockchip. The patch is based on the Brian Norris work but
> slightly
> different, it holds the reset while device is suspended. It was
> tested
> on a Samsung Chromebook Plus with usbc docking station attached by
> doing
> different suspend/resume cycles and checking no usb devices has been
> lost.
> 
> I am not sure this is the better way to solve this but I did not find
> any other way, and, as I am not sure this can be generic, the reset
> is only
> done on rockchip platforms.
> 

I don't really understand why there are per-platform hacks in glue
drivers, instead of having per-platform glue drivers, or some other
pluggable hooks.

> Best regards,
>  Enric
> 
> [1] bfdca1736ea76345071bbc5607d18928e54909ac ('arm64: dts: rockchip:
> add
>     usb3-phy otg-port support for rk3399')
> 
>  drivers/usb/dwc3/dwc3-of-simple.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/dwc3-of-simple.c
> b/drivers/usb/dwc3/dwc3-of-simple.c
> index dbeff5e6ad14..1d1ece99ed94 100644
> --- a/drivers/usb/dwc3/dwc3-of-simple.c
> +++ b/drivers/usb/dwc3/dwc3-of-simple.c
> @@ -201,9 +201,30 @@ static int dwc3_of_simple_runtime_resume(struct
> device *dev)
>  
>  	return 0;
>  }
> +
> +static int dwc3_of_simple_suspend(struct device *dev)
> +{
> +	struct dwc3_of_simple *simple = dev_get_drvdata(dev);
> +
> +	if (of_device_is_compatible(dev->of_node, "rockchip,rk3399-
> dwc3"))
> 

Instead of calling of_device_is_compatible in each suspend/resume,
which seems quite expensive, how about having a per-device boolean
'needs_reset' or something like that?

Or maybe just have a boolean devicetree property for this?

Regards,
Eze

Powered by blists - more mailing lists