| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <SN6PR02MB4959387B3272ECC07C76632DC1440@SN6PR02MB4959.namprd02.prod.outlook.com>
Date: Mon, 9 Jul 2018 10:38:46 +0000
From: Manish Narani <MNARANI@...inx.com>
To: Adrian Hunter <adrian.hunter@...el.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will.deacon@....com" <will.deacon@....com>,
"mdf@...nel.org" <mdf@...nel.org>,
"stefan.krsmanovic@...ios.com" <stefan.krsmanovic@...ios.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Michal Simek <michals@...inx.com>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>
CC: Srinivas Goud <sgoud@...inx.com>,
Anirudha Sarangi <anirudh@...inx.com>
Subject: RE: [RFC PATCH 3/3] sdhci: arasan: Add support to read Tap Delay
values from DT
Ping
> -----Original Message-----
> From: Manish Narani
> Sent: Thursday, June 21, 2018 6:25 PM
> To: Adrian Hunter <adrian.hunter@...el.com>; robh+dt@...nel.org;
> catalin.marinas@....com; will.deacon@....com; mdf@...nel.org;
> stefan.krsmanovic@...ios.com; linux-arm-kernel@...ts.infradead.org; linux-
> kernel@...r.kernel.org; linux-mmc@...r.kernel.org;
> devicetree@...r.kernel.org; Michal Simek <michals@...inx.com>;
> ulf.hansson@...aro.org
> Cc: Srinivas Goud <sgoud@...inx.com>; Anirudha Sarangi
> <anirudh@...inx.com>
> Subject: RE: [RFC PATCH 3/3] sdhci: arasan: Add support to read Tap Delay
> values from DT
>
> Hi Adrian,
>
> > -----Original Message-----
> > From: Adrian Hunter [mailto:adrian.hunter@...el.com]
> > Sent: Tuesday, June 19, 2018 5:08 PM
> > To: Manish Narani <MNARANI@...inx.com>; robh+dt@...nel.org;
> > catalin.marinas@....com; will.deacon@....com; mdf@...nel.org;
> > stefan.krsmanovic@...ios.com; linux-arm-kernel@...ts.infradead.org;
> > linux- kernel@...r.kernel.org; linux-mmc@...r.kernel.org;
> > devicetree@...r.kernel.org; Michal Simek <michals@...inx.com>;
> > ulf.hansson@...aro.org
> > Cc: Srinivas Goud <sgoud@...inx.com>; Anirudha Sarangi
> > <anirudh@...inx.com>
> > Subject: Re: [RFC PATCH 3/3] sdhci: arasan: Add support to read Tap
> > Delay values from DT
> >
> > On 14/06/18 08:38, Manish Narani wrote:
> > > Ping for RFC
> >
> > What is eemi? Why aren't there patches for that?
> Eemi(Extensible Energy Management Interface) is a power management
> interface for ZynqMP core. The patches for the same are already in process of
> mainlining.
> https://lkml.org/lkml/2018/6/20/823
>
> Thanks,
> Manish
> >
> > >
> > >> -----Original Message-----
> > >> From: Manish Narani [mailto:manish.narani@...inx.com]
> > >> Sent: Thursday, June 7, 2018 5:42 PM
> > >> To: robh+dt@...nel.org; mark.rutland@....com;
> > >> catalin.marinas@....com; will.deacon@....com; mdf@...nel.org;
> > >> stefan.krsmanovic@...ios.com; linux-arm-kernel@...ts.infradead.org;
> > >> linux-kernel@...r.kernel.org; linux- mmc@...r.kernel.org;
> > >> devicetree@...r.kernel.org; adrian.hunter@...el.com;
> > >> michal.simek@...inx.com; ulf.hansson@...aro.org
> > >> Cc: Manish Narani <MNARANI@...inx.com>
> > >> Subject: [RFC PATCH 3/3] sdhci: arasan: Add support to read Tap
> > >> Delay values from DT
> > >>
> > >> This patch adds support for reading Tap Delay values from Device
> > >> Tree and write them via eemi calls. The macros containing these tap
> > >> delay values are removed from the driver.
> > >>
> > >> Signed-off-by: Manish Narani <manish.narani@...inx.com>
> > >> ---
> > >> drivers/mmc/host/sdhci-of-arasan.c | 131
> > >> +++++++++++++++++++++++++++++++++++++
> > >> 1 file changed, 131 insertions(+)
> > >>
> > >> diff --git a/drivers/mmc/host/sdhci-of-arasan.c
> > >> b/drivers/mmc/host/sdhci- of-arasan.c index e3332a5..fc0fd01 100644
> > >> --- a/drivers/mmc/host/sdhci-of-arasan.c
> > >> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> > >> @@ -36,6 +36,8 @@
> > >>
> > >> #define PHY_CLK_TOO_SLOW_HZ 400000
> > >>
> > >> +#define MMC_BANK2 0x2
> > >> +
> > >> /*
> > >> * On some SoCs the syscon area has a feature where the upper 16-bits of
> > >> * each 32-bit register act as a write mask for the lower 16-bits.
> > >> This allows @@ -90,6 +92,10 @@ struct sdhci_arasan_data {
> > >> struct sdhci_host *host;
> > >> struct clk *clk_ahb;
> > >> struct phy *phy;
> > >> + u32 mio_bank;
> > >> + u32 device_id;
> > >> + u32 itapdly[MMC_TIMING_MMC_HS400 + 1];
> > >> + u32 otapdly[MMC_TIMING_MMC_HS400 + 1];
> > >> bool is_phy_on;
> > >>
> > >> bool has_cqe;
> > >> @@ -160,11 +166,36 @@ static int sdhci_arasan_syscon_write(struct
> > >> sdhci_host *host,
> > >> return ret;
> > >> }
> > >>
> > >> +/**
> > >> + * arasan_zynqmp_set_tap_delay - Program the tap delays.
> > >> + * @deviceid: Unique Id of device
> > >> + * @itap_delay: Input Tap Delay
> > >> + * @oitap_delay: Output Tap Delay
> > >> + */
> > >> +static void arasan_zynqmp_set_tap_delay(u8 deviceid, u8
> > >> +itap_delay,
> > >> +u8
> > >> +otap_delay) {
> > >> + const struct zynqmp_eemi_ops *eemi_ops =
> > >> zynqmp_pm_get_eemi_ops();
> > >> + u32 node_id = (deviceid == 0) ? NODE_SD_0 : NODE_SD_1;
> > >> +
> > >> + if (!eemi_ops || !eemi_ops->ioctl)
> > >> + return;
> > >> +
> > >> + if (itap_delay)
> > >> + eemi_ops->ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> > >> + PM_TAPDELAY_INPUT, itap_delay, NULL);
> > >> +
> > >> + if (otap_delay)
> > >> + eemi_ops->ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> > >> + PM_TAPDELAY_OUTPUT, otap_delay, NULL);
> > >> }
> > >> +
> > >> static void sdhci_arasan_set_clock(struct sdhci_host *host,
> > >> unsigned int
> > >> clock) {
> > >> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> > >> struct sdhci_arasan_data *sdhci_arasan =
> > >> sdhci_pltfm_priv(pltfm_host);
> > >> bool ctrl_phy = false;
> > >> + u8 itap_delay;
> > >> + u8 otap_delay;
> > >>
> > >> if (!IS_ERR(sdhci_arasan->phy)) {
> > >> if (!sdhci_arasan->is_phy_on && clock <=
> > >> PHY_CLK_TOO_SLOW_HZ) { @@ -200,6 +231,16 @@ static void
> > >> sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
> > >> }
> > >> }
> > >>
> > >> + if (host->version >= SDHCI_SPEC_300) {
> > >> + if ((host->timing != MMC_TIMING_LEGACY) &&
> > >> + (host->timing != MMC_TIMING_UHS_SDR12)) {
> > >> + itap_delay = sdhci_arasan->itapdly[host->timing];
> > >> + otap_delay = sdhci_arasan->otapdly[host->timing];
> > >> + arasan_zynqmp_set_tap_delay(sdhci_arasan-
> > >>> device_id,
> > >> + itap_delay, otap_delay);
> > >> + }
> > >> + }
> > >> +
> > >> if (ctrl_phy && sdhci_arasan->is_phy_on) {
> > >> phy_power_off(sdhci_arasan->phy);
> > >> sdhci_arasan->is_phy_on = false; @@ -456,6 +497,7 @@ static
> > >> const struct of_device_id sdhci_arasan_of_match[] = {
> > >> { .compatible = "arasan,sdhci-8.9a" },
> > >> { .compatible = "arasan,sdhci-5.1" },
> > >> { .compatible = "arasan,sdhci-4.9a" },
> > >> + { .compatible = "xlnx,zynqmp-8.9a" },
> > >>
> > >> { /* sentinel */ }
> > >> };
> > >> @@ -641,6 +683,74 @@ static void
> > >> sdhci_arasan_unregister_sdclk(struct
> > >> device *dev)
> > >> of_clk_del_provider(dev->of_node);
> > >> }
> > >>
> > >> +/**
> > >> + * arasan_zynqmp_dt_parse_tap_delays - Read Tap Delay values from
> > >> +DT
> > >> + *
> > >> + * Called at initialization to parse the values of Tap Delays.
> > >> + *
> > >> + * @dev: Pointer to our struct device.
> > >> + */
> > >> +static void arasan_zynqmp_dt_parse_tap_delays(struct device *dev) {
> > >> + struct platform_device *pdev = to_platform_device(dev);
> > >> + struct sdhci_host *host = platform_get_drvdata(pdev);
> > >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> > >> + struct sdhci_arasan_data *sdhci_arasan =
> > >> sdhci_pltfm_priv(pltfm_host);
> > >> + struct device_node *np = dev->of_node;
> > >> +
> > >> + of_property_read_u32(np, "xlnx,itap_delay_sd_hsd",
> > >> + &sdhci_arasan->itapdly[MMC_TIMING_SD_HS]);
> > >> + of_property_read_u32(np, "xlnx,otap_delay_sd_hsd",
> > >> + &sdhci_arasan->otapdly[MMC_TIMING_SD_HS]);
> > >> + of_property_read_u32(np, "xlnx,itap_delay_sdr25",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_UHS_SDR25]);
> > >> + of_property_read_u32(np, "xlnx,otap_delay_sdr25",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_UHS_SDR25]);
> > >> + of_property_read_u32(np, "xlnx,itap_delay_sdr50",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_UHS_SDR50]);
> > >> + of_property_read_u32(np, "xlnx,otap_delay_sdr50",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_UHS_SDR50]);
> > >> + of_property_read_u32(np, "xlnx,itap_delay_sd_ddr50",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_UHS_DDR50]);
> > >> + of_property_read_u32(np, "xlnx,otap_delay_sd_ddr50",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_UHS_DDR50]);
> > >> + of_property_read_u32(np, "xlnx,itap_delay_mmc_hsd",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_MMC_HS]);
> > >> + of_property_read_u32(np, "xlnx,otap_delay_mmc_hsd",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_MMC_HS]);
> > >> + of_property_read_u32(np, "xlnx,itap_delay_mmc_ddr50",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_MMC_DDR52]);
> > >> + of_property_read_u32(np, "xlnx,otap_delay_mmc_ddr50",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_MMC_DDR52]);
> > >> + if (sdhci_arasan->mio_bank == MMC_BANK2) {
> > >> + of_property_read_u32(np,
> > >> + "xlnx,itap_delay_sdr104_b2",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_UHS_SDR104]);
> > >> + of_property_read_u32(np,
> > >> + "xlnx,otap_delay_sdr104_b2",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_UHS_SDR104]);
> > >> + of_property_read_u32(np,
> > >> + "xlnx,itap_delay_mmc_hs200_b2",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_MMC_HS200]);
> > >> + of_property_read_u32(np,
> > >> + "xlnx,otap_delay_mmc_hs200_b2",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_MMC_HS200]);
> > >> + } else {
> > >> + of_property_read_u32(np,
> > >> + "xlnx,itap_delay_sdr104_b0",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_UHS_SDR104]);
> > >> + of_property_read_u32(np,
> > >> + "xlnx,otap_delay_sdr104_b0",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_UHS_SDR104]);
> > >> + of_property_read_u32(np,
> > >> + "xlnx,itap_delay_mmc_hs200_b0",
> > >> + &sdhci_arasan-
> > >>> itapdly[MMC_TIMING_MMC_HS200]);
> > >> + of_property_read_u32(np,
> > >> + "xlnx,otap_delay_mmc_hs200_b0",
> > >> + &sdhci_arasan-
> > >>> otapdly[MMC_TIMING_MMC_HS200]);
> > >> + }
> > >> +}
> > >> +
> > >> static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
> {
> > >> struct sdhci_host *host = sdhci_arasan->host; @@ -776,6 +886,27
> > >> @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> > >> goto unreg_clk;
> > >> }
> > >>
> > >> + if (of_device_is_compatible(pdev->dev.of_node,
> > >> + "xlnx,zynqmp-8.9a")) {
> > >> + ret = of_property_read_u32(pdev->dev.of_node,
> > >> + "xlnx,mio_bank",
> > >> + &sdhci_arasan->mio_bank);
> > >> + if (ret < 0) {
> > >> + dev_err(&pdev->dev,
> > >> + "\"xlnx,mio_bank \" property is missing.\n");
> > >> + goto clk_disable_all;
> > >> + }
> > >> + ret = of_property_read_u32(pdev->dev.of_node,
> > >> + "xlnx,device_id",
> > >> + &sdhci_arasan->device_id);
> > >> + if (ret < 0) {
> > >> + dev_err(&pdev->dev,
> > >> + "\"xlnx,device_id \" property is missing.\n");
> > >> + goto clk_disable_all;
> > >> + }
> > >> + arasan_zynqmp_dt_parse_tap_delays(&pdev->dev);
> > >> + }
> > >> +
> > >> sdhci_arasan->phy = ERR_PTR(-ENODEV);
> > >> if (of_device_is_compatible(pdev->dev.of_node,
> > >> "arasan,sdhci-5.1")) {
> > >> --
> > >> 2.7.4
> > >
> > >
Powered by blists - more mailing lists