[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAHLCerMsVwrkeK+dVpqapM5EXcYuGxrFE8FdNL4r6NJoWW5awg@mail.gmail.com>
Date: Mon, 9 Jul 2018 17:07:51 +0530
From: Amit Kucheria <amit.kucheria@...aro.org>
To: LKML <linux-kernel@...r.kernel.org>
Cc: Rajendra Nayak <rnayak@...eaurora.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Eduardo Valentin <edubezval@...il.com>,
smohanad@...eaurora.org,
Vivek Gautam <vivek.gautam@...eaurora.org>,
Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
"open list:ARM/QUALCOMM SUPPORT" <linux-soc@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
lakml <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v5 7/7] arm64: dts: sdm845: Add tsens nodes
On Mon, Jul 9, 2018 at 4:57 PM, Amit Kucheria <amit.kucheria@...aro.org> wrote:
> SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> sensors. It uses version 2 of the TSENS IP, so use the fallback property to
> allow more common code.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb..d97ee00 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -221,6 +221,22 @@
> #interrupt-cells = <2>;
> };
>
> + tsens0: tsens@...2000 {
Oops, sending out v6 to fix this.
> + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> + reg = <0xc263000 0x1ff>, /* TM */
> + <0xc222000 0x1ff>; /* SROT */
> + #qcom,sensors = <13>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: tsens@...3000 {
> + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> + reg = <0xc265000 0x1ff>, /* TM */
> + <0xc223000 0x1ff>; /* SROT */
> + #qcom,sensors = <8>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> spmi_bus: spmi@...0000 {
> compatible = "qcom,spmi-pmic-arb";
> reg = <0xc440000 0x1100>,
> --
> 2.7.4
>
Powered by blists - more mailing lists