linux-kernel - [PATCH v6 6/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <bf1147fa417314b2fbf5c0cfb682445587fe39bb.1531136000.git.amit.kucheria@linaro.org>
Date:   Mon,  9 Jul 2018 17:13:28 +0530
From:   Amit Kucheria <amit.kucheria@...aro.org>
To:     linux-kernel@...r.kernel.org
Cc:     rnayak@...eaurora.org, linux-arm-msm@...r.kernel.org,
        bjorn.andersson@...aro.org, edubezval@...il.com,
        smohanad@...eaurora.org, vivek.gautam@...eaurora.org,
        andy.gross@...aro.org, Zhang Rui <rui.zhang@...el.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>, linux-pm@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: [PATCH v6 6/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP

We want to create common code for v2 of the TSENS IP block that is used in
a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle
most of the common functionality start with a common get_temp() function.

It is also necessary to split out the memory regions for the TM and SROT
register banks because their offsets are not constant across SoC families.

Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
---
 .../devicetree/bindings/thermal/qcom-tsens.txt     | 25 +++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 06195e8..8f963b1 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -1,10 +1,16 @@
 * QCOM SoC Temperature Sensor (TSENS)
 
 Required properties:
-- compatible :
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+- compatible:
+  Must be one of the following:
+    - "qcom,msm8916-tsens" (MSM8916)
+    - "qcom,msm8974-tsens" (MSM8974)
+    - "qcom,msm8996-tsens" (MSM8996)
+    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
+    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC with
+  version 2 of the TSENS IP. MSM8996 is the only exception beacause the generic
+  property did not exist when support was added.
 
 - reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
@@ -12,7 +18,7 @@ Required properties:
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
-Example:
+Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced):
 tsens: thermal-sensor@...000 {
 		compatible = "qcom,msm8916-tsens";
 		reg = <0x4a8000 0x2000>;
@@ -20,3 +26,12 @@ tsens: thermal-sensor@...000 {
 		nvmem-cell-names = "caldata", "calsel";
 		#thermal-sensor-cells = <1>;
 	};
+
+Example 2 (for any platform containing v2 of the TSENS IP):
+tsens0: tsens@...2000 {
+		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+		reg = <0xc263000 0x1ff>, /* TM */
+			<0xc222000 0x1ff>; /* SROT */
+		#qcom,sensors = <13>;
+		#thermal-sensor-cells = <1>;
+	};
-- 
2.7.4