[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180710090710.9066-6-Denis.Osterland@diehl.com>
Date: Tue, 10 Jul 2018 09:44:15 +0000
From: Denis OSTERLAND <denis.osterland@...hl.com>
To: "mark.rutland@....com" <mark.rutland@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
"m.grzeschik@...gutronix.de" <m.grzeschik@...gutronix.de>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"a.zummo@...ertech.it" <a.zummo@...ertech.it>,
"linux-rtc@...r.kernel.org" <linux-rtc@...r.kernel.org>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
Denis OSTERLAND <denis.osterland@...hl.com>
Subject: [PATCH v4 5/5] rtc: isl1219: add device tree docu
From: Denis Osterland <Denis.Osterland@...hl.com>
The devicetree documentation for the ISL1219 device tree
binding is added with an short example. It is not a trivial
device, because it supports two interrupt souces.
Signed-off-by: Denis Osterland <Denis.Osterland@...hl.com>
---
.../devicetree/bindings/rtc/isil,isl1219.txt | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl1219.txt
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
new file mode 100644
index 000000000000..f26f1e9d4bde
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
@@ -0,0 +1,29 @@
+Intersil ISL1219 I2C RTC/Alarm chip with event in
+
+ISL1219 has additional pins EVIN and #EVDET for tamper detection.
+
+Required properties supported by the device:
+
+ - "compatible": must be "isil,isl1219"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+ - "interrupt-names": list which may contains "irq" and "evdet"
+ - "interrupt-parent", "interrupts", "interrupts-extended":
+ for passing the interrupt line of the SoC connected to #IRQ pin
+ and #EVDET pin of the RTC chip.
+ - "isil,ev-evienb": if present bit can be set to disable event input pull-up
+
+
+Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12
+ and #EVDET pin connected to SoC gpio2 pin 24:
+
+ isl1219: rtc@68 {
+ compatible = "isil,isl1219";
+ reg = <0x68>;
+ interrupt-names = "irq", "evdet";
+ interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
+ <&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
+ };
+
--
2.18.0
Diehl Connectivity Solutions GmbH
Geschäftsführung: Horst Leonberger
Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
Nürnberg: HRB 32315
___________________________________________________________________________________________________
Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited.
Powered by blists - more mailing lists