[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFd5g45=SkyLWRy=DnYOZCXcmHkrbTdOSBi=n=kUgyvRPoU8Mg@mail.gmail.com>
Date: Tue, 10 Jul 2018 22:47:28 -0700
From: Brendan Higgins <brendanhiggins@...gle.com>
To: jae.hyun.yoo@...ux.intel.com
Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>, linux-i2c@...r.kernel.org,
OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
linux-aspeed@...ts.ozlabs.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
jarkko.nikula@...ux.intel.com, james.feist@...ux.intel.com,
vernon.mauery@...ux.intel.com
Subject: Re: [PATCH] i2c: aspeed: Fix initial values of master and slave state
On Mon, Jul 2, 2018 at 2:20 PM Jae Hyun Yoo
<jae.hyun.yoo@...ux.intel.com> wrote:
>
> This patch changes the order of enum aspeed_i2c_master_state and
> enum aspeed_i2c_slave_state defines to make their initial value to
> ASPEED_I2C_MASTER_INACTIVE and ASPEED_I2C_SLAVE_STOP respectively.
> In case of multi-master use, if a slave data comes ahead of the
> first master xfer, master_state starts from an invalid state so
> this change fixes the issue.
>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
> ---
> drivers/i2c/busses/i2c-aspeed.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> index 60e4d0e939a3..2714c7fbe7c9 100644
> --- a/drivers/i2c/busses/i2c-aspeed.c
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -111,22 +111,22 @@
> #define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0)
>
> enum aspeed_i2c_master_state {
> + ASPEED_I2C_MASTER_INACTIVE,
> ASPEED_I2C_MASTER_START,
> ASPEED_I2C_MASTER_TX_FIRST,
> ASPEED_I2C_MASTER_TX,
> ASPEED_I2C_MASTER_RX_FIRST,
> ASPEED_I2C_MASTER_RX,
> ASPEED_I2C_MASTER_STOP,
> - ASPEED_I2C_MASTER_INACTIVE,
> };
>
> enum aspeed_i2c_slave_state {
> + ASPEED_I2C_SLAVE_STOP,
> ASPEED_I2C_SLAVE_START,
> ASPEED_I2C_SLAVE_READ_REQUESTED,
> ASPEED_I2C_SLAVE_READ_PROCESSED,
> ASPEED_I2C_SLAVE_WRITE_REQUESTED,
> ASPEED_I2C_SLAVE_WRITE_RECEIVED,
> - ASPEED_I2C_SLAVE_STOP,
> };
>
> struct aspeed_i2c_bus {
> --
> 2.17.1
>
Reviewed-by: Brendan Higgins <brendanhiggins@...gle.com>
Thanks!
BTW, sorry for the delay, just got back from vacation. I will review
the rest tomorrow.
Powered by blists - more mailing lists