lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180711161206.GA1558@rob-hp-laptop>
Date:   Wed, 11 Jul 2018 10:12:06 -0600
From:   Rob Herring <robh@...nel.org>
To:     Jisheng Zhang <Jisheng.Zhang@...aptics.com>
Cc:     Ulf Hansson <ulf.hansson@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Adrian Hunter <adrian.hunter@...el.com>,
        devicetree@...r.kernel.org, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Manjunath M B <Manjunath.MB@...opsys.com>,
        Prabu Thangamuthu <Prabu.T@...opsys.com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 1/2] dt: bindings: Add bindings for SDHCI Synopsys DWC
 MSHC

On Fri, Jul 06, 2018 at 03:20:47PM +0800, Jisheng Zhang wrote:
> Synopsys SDHCI compatible DesignWare Cores Mobile Storage Host
> Controller can support eMMC/SD/SDIO. Add the bindings.
> 
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@...aptics.com>
> ---
>  .../bindings/mmc/sdhci-of-dwcmshc.txt         | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt
> 
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt
> new file mode 100644
> index 000000000000..ee4253b33be2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt
> @@ -0,0 +1,20 @@
> +* Synopsys DesignWare Cores Mobile Storage Host Controller
> +
> +Required properties:
> +- compatible: should be one of the following:
> +    "snps,dwcmshc-sdhci"

Needs to note that there must also be an SoC specific compatible.

> +- reg: offset and length of the register set for the device.
> +- interrupts: a single interrupt specifier.
> +- clocks: Array of clocks required for SDHCI; requires at least one for
> +    core clock.
> +- clock-names: Array of names corresponding to clocks property; shall be
> +    "core" for core clock and "bus" for optional bus clock.
> +
> +Example:
> +	sdhci2: sdhci@...000 {
> +		compatible = "snps,dwcmshc-sdhci";
> +		reg = <0xaa0000 0x1000>;
> +		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&emmcclk>;
> +		bus-width = <8>;
> +	}
> -- 
> 2.18.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ