[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180711163413.GA545@tuxbook-pro>
Date: Wed, 11 Jul 2018 09:34:13 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Amit Kucheria <amit.kucheria@...aro.org>
Cc: linux-kernel@...r.kernel.org, rnayak@...eaurora.org,
linux-arm-msm@...r.kernel.org, edubezval@...il.com,
smohanad@...eaurora.org, vivek.gautam@...eaurora.org,
andy.gross@...aro.org, Zhang Rui <rui.zhang@...el.com>,
linux-pm@...r.kernel.org
Subject: Re: [PATCH v6 2/7] thermal: tsens: Add support to split up register
address space into two
On Mon 09 Jul 04:43 PDT 2018, Amit Kucheria wrote:
> There are two banks of registers for v2 TSENS IPs: SROT and TM. On older
> SoCs these were contiguous, leading to DTs mapping them as one register
> address space of size 0x2000. In newer SoCs, these two banks are not
> contiguous anymore.
>
> Fixing old DTs to split the address space into allows us to have cleaner
> common code e.g. get_temp() that is shared across new and old platforms.
>
> But we need to add logic to init_common() to differentiate between old and
> new DTs and adjust associated offsets for the TM register bank so that the
> old DTs will continue to function correctly.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> ---
> drivers/thermal/qcom/tsens-8996.c | 2 +-
> drivers/thermal/qcom/tsens-common.c | 11 +++++++++++
> drivers/thermal/qcom/tsens.h | 1 +
> 3 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-8996.c
> index e1f7781..60765b1 100644
> --- a/drivers/thermal/qcom/tsens-8996.c
> +++ b/drivers/thermal/qcom/tsens-8996.c
> @@ -28,7 +28,7 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
> unsigned int sensor_addr;
> int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret;
>
> - sensor_addr = STATUS_OFFSET + s->hw_id * 4;
> + sensor_addr = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
> ret = regmap_read(tmdev->map, sensor_addr, &code);
> if (ret)
> return ret;
> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> index b1449ad..4a741b0 100644
> --- a/drivers/thermal/qcom/tsens-common.c
> +++ b/drivers/thermal/qcom/tsens-common.c
> @@ -16,6 +16,7 @@
> #include <linux/io.h>
> #include <linux/nvmem-consumer.h>
> #include <linux/of_address.h>
> +#include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include "tsens.h"
> @@ -126,11 +127,21 @@ static const struct regmap_config tsens_config = {
> int __init init_common(struct tsens_device *tmdev)
> {
> void __iomem *base;
> + struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
>
> + if (!op)
> + return -EINVAL;
> base = of_iomap(tmdev->dev->of_node, 0);
> if (!base)
> return -EINVAL;
>
> + if (op->num_resources > 1) {
> + tmdev->tm_offset = 0;
> + } else {
> + /* old DTs where SROT and TM were in a contiguous 2K block */
> + tmdev->tm_offset = 0x1000;
> + }
> +
> tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
> if (IS_ERR(tmdev->map)) {
> iounmap(base);
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index dc56e1e..d785b37 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -77,6 +77,7 @@ struct tsens_device {
> struct device *dev;
> u32 num_sensors;
> struct regmap *map;
> + u32 tm_offset;
> struct tsens_context ctx;
> const struct tsens_ops *ops;
> struct tsens_sensor sensor[0];
> --
> 2.7.4
>
Powered by blists - more mailing lists