[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <B652B768-D5BC-460F-B0A4-64A2A76064CC@cadence.com>
Date: Thu, 12 Jul 2018 11:58:04 +0000
From: Janek Kotas <jank@...ence.com>
To: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"vinholikatti@...il.com" <vinholikatti@...il.com>,
"jejb@...ux.vnet.ibm.com" <jejb@...ux.vnet.ibm.com>,
"martin.petersen@...cle.com" <martin.petersen@...cle.com>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>
Subject: [PATCH v2 1/2] dt-bindings: ufs: Add UFS platform driver for Cadence
UFS
This patch adds a device tree platform
driver description for Cadence UFS Controller.
Signed-off-by: Jan Kotas <jank@...ence.com>
---
.../devicetree/bindings/ufs/cdns,ufshc.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
new file mode 100644
index 0000000..cb6d62a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
@@ -0,0 +1,31 @@
+* Cadence Universal Flash Storage (UFS) Controller
+
+UFS nodes are defined to describe on-chip UFS host controllers.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible : compatible list, contains the following controller:
+ "cdns,ufshc"
+ complemented with the JEDEC version:
+ "jedec,ufs-2.0"
+
+- reg : address and length of the UFS register set
+- interrupts : one interrupt mapping
+- clocks : List of phandle and clock specifier pairs.
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "core" is mandatory.
+- freq-table-hz : Array of <min max> operating frequencies stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+
+Example:
+ ufs@...30000 {
+ compatible = "cdns,ufshc", "jedec,ufs-2.0";
+ reg = <0xfd030000 0x10000>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+ freq-table-hz = <0 0>, <0 0>;
+ clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
+ clock-names = "core_clk", "phy_clk";
+ };
--
1.9.0
Powered by blists - more mailing lists