Message-ID: <20180712173235.7901-2-tudor.ambarus@microchip.com>
Date:   Thu, 12 Jul 2018 20:32:33 +0300
From:   Tudor Ambarus <tudor.ambarus@...rochip.com>
To:     <marek.vasut@...il.com>, <cyrille.pitchen@...rochip.com>,
        <dwmw2@...radead.org>, <computersforpeace@...il.com>,
        <boris.brezillon@...tlin.com>, <richard@....at>
CC:     <linux-mtd@...ts.infradead.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <nicolas.ferre@...rochip.com>,
        <Cristian.Birsan@...rochip.com>,
        Tudor Ambarus <tudor.ambarus@...rochip.com>
Subject: [PATCH v2 1/3] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories

Based on Cyrille Pitchen's patch https://lkml.org/lkml/2017/3/22/935.

This patch is a transitional patch in introducing  the support of
SFDP SPI memories with non-uniform erase sizes like Spansion s25fs512s.
Non-uniform erase maps will be used later when initialized based on the
SFDP data.

Introduce the memory erase map which splits the memory array into one
or many erase regions. Each erase region supports up to 4 erase types,
as defined by the JEDEC JESD216B (SFDP) specification.

To be backward compatible, the erase map of uniform SPI NOR flash memories
is initialized so it contains only one erase region and this erase region
supports only one erase command. Hence a single size is used to erase any
sector/block of the memory.

Besides, since the algorithm used to erase sectors on non-uniform SPI NOR
flash memories is quite expensive, when possible, the erase map is tuned
to come back to the uniform case.

The 'erase with the best command, move forward and repeat' approach was
suggested by Cristian Birsan in a brainstorm session, so:

Suggested-by: Cristian Birsan <cristian.birsan@...rochip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
 drivers/mtd/spi-nor/spi-nor.c | 475 ++++++++++++++++++++++++++++++++++++++----
 include/linux/mtd/spi-nor.h   | 109 ++++++++++
 2 files changed, 542 insertions(+), 42 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index d9c368c..899b8c1 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -18,6 +18,7 @@
 #include <linux/math64.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
+#include <linux/sort.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/of_platform.h>
@@ -260,6 +261,18 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor,
 	nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
 	nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
 	nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
+
+	if (!spi_nor_has_uniform_erase(nor)) {
+		struct spi_nor_erase_map *map = &nor->erase_map;
+		struct spi_nor_erase_type *erase;
+		int i;
+
+		for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+			erase = &map->erase_type[i];
+			erase->opcode =
+				spi_nor_convert_3to4_erase(erase->opcode);
+		}
+	}
 }
 
 /* Enable/disable 4-byte addressing mode. */
@@ -497,6 +510,206 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
 	return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width);
 }
 
+/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
+static inline u64
+spi_nor_div_by_erase_size(const struct spi_nor_erase_type *erase,
+			  u64 dividend, u32 *remainder)
+{
+	*remainder = (u32)dividend & erase->size_mask;
+	return dividend >> erase->size_shift;
+}
+
+static const struct spi_nor_erase_type *
+spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
+			     const struct spi_nor_erase_region *region,
+			     u64 addr, u32 len)
+{
+	const struct spi_nor_erase_type *erase;
+	u32 rem;
+	int i;
+	u8 erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+	/*
+	 * Erase types are ordered by size, with the biggest erase type at
+	 * index 0.
+	 */
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		/* Does the erase region support the tested erase type? */
+		if (!(erase_mask & BIT(i)))
+			continue;
+
+		erase = &map->erase_type[i];
+
+		/* Don't erase more than what the user has asked for. */
+		if (erase->size > len)
+			continue;
+
+		/* Alignment is not mandatory for overlaid regions */
+		if (region->offset & SNOR_OVERLAID_REGION)
+			return erase;
+
+		spi_nor_div_by_erase_size(erase, addr, &rem);
+		if (rem)
+			continue;
+		else
+			return erase;
+	}
+
+	return NULL;
+}
+
+static struct spi_nor_erase_region *
+spi_nor_region_next(struct spi_nor_erase_region *region)
+{
+	if (spi_nor_region_is_last(region))
+		return NULL;
+	return ++region;
+}
+
+static struct spi_nor_erase_region *
+spi_nor_find_erase_region(const struct spi_nor_erase_map *map, u64 addr,
+			  u32 len)
+{
+	struct spi_nor_erase_region *region = map->regions;
+	u64 region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+	u64 region_end = region_start + region->size;
+
+	while (addr < region_start || addr >= region_end) {
+		region = spi_nor_region_next(region);
+		if (!region)
+			return ERR_PTR(-EINVAL);
+
+		region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+		region_end = region_start + region->size;
+	}
+
+	return region;
+}
+
+static struct spi_nor_erase_command *
+spi_nor_init_erase_cmd(const struct spi_nor_erase_region *region,
+		       const struct spi_nor_erase_type *erase, u64 addr)
+{
+	struct spi_nor_erase_command *cmd;
+
+	cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&cmd->list);
+	cmd->opcode = erase->opcode;
+	cmd->count = 1;
+
+	if (region->offset & SNOR_OVERLAID_REGION)
+		cmd->size = region->size;
+	else
+		cmd->size = erase->size;
+
+	return cmd;
+}
+
+static void spi_nor_destroy_erase_cmd_list(struct list_head *erase_list)
+{
+	struct spi_nor_erase_command *cmd, *next;
+
+	list_for_each_entry_safe(cmd, next, erase_list, list) {
+		list_del(&cmd->list);
+		kfree(cmd);
+	}
+}
+
+static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
+				       struct list_head *erase_list,
+				       u64 addr, u32 len)
+{
+	const struct spi_nor_erase_map *map = &nor->erase_map;
+	const struct spi_nor_erase_type *erase, *prev_erase = NULL;
+	struct spi_nor_erase_region *region;
+	struct spi_nor_erase_command *cmd = NULL;
+	u64 region_end;
+	int ret = -EINVAL;
+
+	region = spi_nor_find_erase_region(map, addr, len);
+	if (IS_ERR(region))
+		return PTR_ERR(region);
+
+	region_end = spi_nor_region_end(region);
+
+	while (len) {
+		erase = spi_nor_find_best_erase_type(map, region, addr, len);
+		if (!erase)
+			goto destroy_erase_cmd_list;
+
+		if (prev_erase != erase ||
+		    region->offset & SNOR_OVERLAID_REGION) {
+			cmd = spi_nor_init_erase_cmd(region, erase, addr);
+			if (IS_ERR(cmd)) {
+				ret = PTR_ERR(cmd);
+				goto destroy_erase_cmd_list;
+			}
+
+			list_add_tail(&cmd->list, erase_list);
+		} else {
+			cmd->count++;
+		}
+
+		addr += cmd->size;
+		len -= cmd->size;
+
+		if (len && addr >= region_end) {
+			region = spi_nor_region_next(region);
+			if (!region)
+				goto destroy_erase_cmd_list;
+			region_end = spi_nor_region_end(region);
+		}
+
+		prev_erase = erase;
+	}
+
+	return 0;
+
+destroy_erase_cmd_list:
+	spi_nor_destroy_erase_cmd_list(erase_list);
+	return ret;
+}
+
+static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len)
+{
+	LIST_HEAD(erase_list);
+	struct spi_nor_erase_command *cmd, *next;
+	int ret;
+
+	ret = spi_nor_init_erase_cmd_list(nor, &erase_list, addr, len);
+	if (ret)
+		return ret;
+
+	list_for_each_entry_safe(cmd, next, &erase_list, list) {
+		nor->erase_opcode = cmd->opcode;
+		while (cmd->count) {
+			write_enable(nor);
+
+			ret = spi_nor_erase_sector(nor, addr);
+			if (ret)
+				goto destroy_erase_cmd_list;
+
+			addr += cmd->size;
+			cmd->count--;
+
+			ret = spi_nor_wait_till_ready(nor);
+			if (ret)
+				goto destroy_erase_cmd_list;
+		}
+		list_del(&cmd->list);
+		kfree(cmd);
+	}
+
+	return 0;
+
+destroy_erase_cmd_list:
+	spi_nor_destroy_erase_cmd_list(&erase_list);
+	return ret;
+}
+
 /*
  * Erase an address range on the nor chip.  The address range may extend
  * one or more erase sectors.  Return an error is there is a problem erasing.
@@ -511,9 +724,11 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
 	dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
 			(long long)instr->len);
 
-	div_u64_rem(instr->len, mtd->erasesize, &rem);
-	if (rem)
-		return -EINVAL;
+	if (spi_nor_has_uniform_erase(nor)) {
+		div_u64_rem(instr->len, mtd->erasesize, &rem);
+		if (rem)
+			return -EINVAL;
+	}
 
 	addr = instr->addr;
 	len = instr->len;
@@ -552,7 +767,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
 	 */
 
 	/* "sector"-at-a-time erase */
-	} else {
+	} else if (spi_nor_has_uniform_erase(nor)) {
 		while (len) {
 			write_enable(nor);
 
@@ -567,6 +782,12 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
 			if (ret)
 				goto erase_err;
 		}
+
+	/* erase multiple sectors */
+	} else {
+		ret = spi_nor_erase_multi_sectors(nor, addr, len);
+		if (ret)
+			goto erase_err;
 	}
 
 	write_disable(nor);
@@ -2165,6 +2386,83 @@ static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
 
 static int spi_nor_hwcaps_read2cmd(u32 hwcaps);
 
+/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
+static inline void
+spi_nor_set_erase_type(struct spi_nor_erase_type *erase,  u32 size, u8 opcode)
+{
+	erase->size = size;
+	erase->opcode = opcode;
+	erase->size_shift = ffs(erase->size) - 1;
+	erase->size_mask = (1 << erase->size_shift) - 1;
+}
+
+static inline void
+spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase,
+				     u32 size, u8 opcode, u8 i)
+{
+	/*
+	 * The supported Erase Types will be sorted at init in ascending order,
+	 * with the smallest Erase Type size being the first member
+	 * in the erase_type array of the spi_nor_erase_map structure.
+	 * Save the Erase Type index as sorted in the Basic Flash Parameter
+	 * Table since it will be used later on to synchronize with the
+	 * supported Erase Types defined in SFDP optional tables.
+	 */
+	erase->idx = i;
+	spi_nor_set_erase_type(erase, size, opcode);
+}
+
+static int spi_nor_cmp_erase_type(const void *a, const void *b)
+{
+	const struct spi_nor_erase_type *erase1 = a;
+	const struct spi_nor_erase_type *erase2 = b;
+
+	return erase1->size - erase2->size;
+}
+
+static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
+{
+	struct spi_nor_erase_region *region = map->regions;
+	struct spi_nor_erase_type *erase_type = map->erase_type;
+	int i;
+	u8 region_erase_mask, ordered_erase_mask;
+
+	/*
+	 * Sort each region's Erase Types in ascending order with the smallest
+	 * Erase Type size starting at BIT(0).
+	 */
+	while (region) {
+		region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+		/*
+		 * The region's erase mask indicates which erase types are
+		 * supported from the erase types defined in the map.
+		 */
+		ordered_erase_mask = 0;
+		for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+			if (erase_type[i].size &&
+			    region_erase_mask & BIT(erase_type[i].idx))
+				ordered_erase_mask |= BIT(i);
+
+		/* Overwrite erase mask. */
+		region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
+				 ordered_erase_mask;
+
+		region = spi_nor_region_next(region);
+	}
+}
+
+static inline void
+spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+			       u8 erase_mask, u64 flash_size)
+{
+	map->uniform_region.offset = SNOR_ERASE_FLAGS_OFFSET(erase_mask, 1, 0,
+							     0);
+	map->uniform_region.size = flash_size;
+	map->regions = &map->uniform_region;
+	map->uniform_erase_type = erase_mask;
+}
+
 /**
  * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
  * @nor:		pointer to a 'struct spi_nor'
@@ -2199,12 +2497,14 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 			      const struct sfdp_parameter_header *bfpt_header,
 			      struct spi_nor_flash_parameter *params)
 {
-	struct mtd_info *mtd = &nor->mtd;
+	struct spi_nor_erase_map *map = &nor->erase_map;
+	struct spi_nor_erase_type *erase_type = map->erase_type;
 	struct sfdp_bfpt bfpt;
 	size_t len;
 	int i, cmd, err;
 	u32 addr;
 	u16 half;
+	u8 erase_mask;
 
 	/* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
 	if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
@@ -2273,7 +2573,12 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 		spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
 	}
 
-	/* Sector Erase settings. */
+	/*
+	 * Sector Erase settings. Reinitialize the uniform erase map using the
+	 * Erase Types defined in the bfpt table.
+	 */
+	erase_mask = 0;
+	memset(&nor->erase_map, 0, sizeof(nor->erase_map));
 	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
 		const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
 		u32 erasesize;
@@ -2288,18 +2593,18 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 
 		erasesize = 1U << erasesize;
 		opcode = (half >> 8) & 0xff;
-#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
-		if (erasesize == SZ_4K) {
-			nor->erase_opcode = opcode;
-			mtd->erasesize = erasesize;
-			break;
-		}
-#endif
-		if (!mtd->erasesize || mtd->erasesize < erasesize) {
-			nor->erase_opcode = opcode;
-			mtd->erasesize = erasesize;
-		}
+		erase_mask |= BIT(i);
+		spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize,
+						     opcode, i);
 	}
+	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+	/*
+	 * Sort all the map's Erase Types in ascending order with the smallest
+	 * erase size being the first member in the erase_type array.
+	 */
+	sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]),
+	     spi_nor_cmp_erase_type, NULL);
+	spi_nor_regions_sort_erase_types(map);
 
 	/* Stop here if not JESD216 rev A or later. */
 	if (bfpt_header->length < BFPT_DWORD_MAX)
@@ -2455,6 +2760,9 @@ static int spi_nor_init_params(struct spi_nor *nor,
 			       const struct flash_info *info,
 			       struct spi_nor_flash_parameter *params)
 {
+	struct spi_nor_erase_map *map = &nor->erase_map;
+	u8 i, erase_mask;
+
 	/* Set legacy flash parameters as default. */
 	memset(params, 0, sizeof(*params));
 
@@ -2494,6 +2802,28 @@ static int spi_nor_init_params(struct spi_nor *nor,
 	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
 				SPINOR_OP_PP, SNOR_PROTO_1_1_1);
 
+	/*
+	 * Sector Erase settings. Sort Erase Types in ascending order, with the
+	 * smallest erase size starting at BIT(0).
+	 */
+	erase_mask = 0;
+	i = 0;
+	if (info->flags & SECT_4K_PMC) {
+		erase_mask |= BIT(i);
+		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
+				       SPINOR_OP_BE_4K_PMC);
+		i++;
+	} else if (info->flags & SECT_4K) {
+		erase_mask |= BIT(i);
+		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
+				       SPINOR_OP_BE_4K);
+		i++;
+	}
+	erase_mask |= BIT(i);
+	spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
+			       SPINOR_OP_SE);
+	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+
 	/* Select the procedure to set the Quad Enable bit. */
 	if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD |
 				   SNOR_HWCAPS_PP_QUAD)) {
@@ -2521,20 +2851,20 @@ static int spi_nor_init_params(struct spi_nor *nor,
 			params->quad_enable = info->quad_enable;
 	}
 
-	/* Override the parameters with data read from SFDP tables. */
-	nor->addr_width = 0;
-	nor->mtd.erasesize = 0;
 	if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
 	    !(info->flags & SPI_NOR_SKIP_SFDP)) {
 		struct spi_nor_flash_parameter sfdp_params;
+		struct spi_nor_erase_map prev_map;
 
 		memcpy(&sfdp_params, params, sizeof(sfdp_params));
-		if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
-			nor->addr_width = 0;
-			nor->mtd.erasesize = 0;
-		} else {
+		memcpy(&prev_map, &nor->erase_map, sizeof(prev_map));
+
+		if (spi_nor_parse_sfdp(nor, &sfdp_params))
+			/* restore previous erase map */
+			memcpy(&nor->erase_map, &prev_map,
+			       sizeof(nor->erase_map));
+		else
 			memcpy(params, &sfdp_params, sizeof(*params));
-		}
 	}
 
 	return 0;
@@ -2643,29 +2973,90 @@ static int spi_nor_select_pp(struct spi_nor *nor,
 	return 0;
 }
 
-static int spi_nor_select_erase(struct spi_nor *nor,
-				const struct flash_info *info)
+static const struct spi_nor_erase_type *
+spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
+			     const u32 sector_size)
 {
-	struct mtd_info *mtd = &nor->mtd;
+	const struct spi_nor_erase_type *tested_erase, *erase = NULL;
+	int i;
+	u8 uniform_erase_type = map->uniform_erase_type;
 
-	/* Do nothing if already configured from SFDP. */
-	if (mtd->erasesize)
-		return 0;
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		if (!(uniform_erase_type & BIT(i)))
+			continue;
+
+		tested_erase = &map->erase_type[i];
+
+		/*
+		 * If the current erase size is the one, stop here:
+		 * we have found the right uniform Sector Erase command.
+		 */
+		if (tested_erase->size == sector_size) {
+			erase = tested_erase;
+			break;
+		}
+
+		/*
+		 * Otherwise, the current erase size is still a valid canditate.
+		 * Select the biggest valid candidate.
+		 */
+		if (!erase && tested_erase->size)
+			erase = tested_erase;
+	}
 
+	if (!erase)
+		return ERR_PTR(-EINVAL);
+
+	/* Disable all other Sector Erase commands. */
+	map->uniform_erase_type &= ~SNOR_ERASE_TYPE_MASK;
+	map->uniform_erase_type |= BIT(erase - map->erase_type);
+	return erase;
+}
+
+static int spi_nor_select_erase(struct spi_nor *nor, u32 sector_size)
+{
+	struct spi_nor_erase_map *map = &nor->erase_map;
+	const struct spi_nor_erase_type *erase = NULL;
+	struct mtd_info *mtd = &nor->mtd;
+	int i;
+
+	/*
+	 * The previous implementation handling Sector Erase commands assumed
+	 * that the SPI flash memory has an uniform layout then used only one
+	 * of the supported erase sizes for all Sector Erase commands.
+	 * So to be backward compatible, the new implementation also tries to
+	 * manage the SPI flash memory as uniform with a single erase sector
+	 * size, when possible.
+	 */
 #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
 	/* prefer "small sector" erase if possible */
-	if (info->flags & SECT_4K) {
-		nor->erase_opcode = SPINOR_OP_BE_4K;
-		mtd->erasesize = 4096;
-	} else if (info->flags & SECT_4K_PMC) {
-		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
-		mtd->erasesize = 4096;
-	} else
+	sector_size = 4096u;
 #endif
-	{
-		nor->erase_opcode = SPINOR_OP_SE;
-		mtd->erasesize = info->sector_size;
+
+	if (spi_nor_has_uniform_erase(nor)) {
+		erase = spi_nor_select_uniform_erase(map, sector_size);
+		if (IS_ERR(erase))
+			return PTR_ERR(erase);
+		nor->erase_opcode = erase->opcode;
+		mtd->erasesize = erase->size;
+		return 0;
 	}
+
+	/*
+	 * For non-uniform SPI flash memory, set mtd->erasesize to the
+	 * maximum erase sector size. No need to set nor->erase_opcode.
+	 */
+	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+		if (map->erase_type[i].size) {
+			erase = &map->erase_type[i];
+			break;
+		}
+	}
+
+	if (!erase)
+		return -EINVAL;
+
+	mtd->erasesize = erase->size;
 	return 0;
 }
 
@@ -2712,7 +3103,7 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
 	}
 
 	/* Select the Sector Erase command. */
-	err = spi_nor_select_erase(nor, info);
+	err = spi_nor_select_erase(nor, info->sector_size);
 	if (err) {
 		dev_err(nor->dev,
 			"can't select erase settings supported by both the SPI controller and memory.\n");
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index e60da0d..2131963 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -238,6 +238,101 @@ enum spi_nor_option_flags {
 };
 
 /**
+ * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
+ * @size:		the size of the sector/block erased by the erase type.
+ *			JEDEC JESD216B imposes erase sizes to be a power of 2.
+ * @size_shift:		@size is a power of 2, the shift is stored in
+ *			@size_shift.
+ * @size_mask:		the size mask based on @size_shift.
+ * @opcode:		the SPI command op code to erase the sector/block.
+ * @idx:		Erase Type index as sorted in the Basic Flash Parameter
+ *			Table. It will be used to synchronize the supported
+ *			Erase Types with the ones identified in the SFDP
+ *			optional tables.
+ */
+struct spi_nor_erase_type {
+	u32	size;
+	u32	size_shift;
+	u32	size_mask;
+	u8	opcode;
+	u8	idx;
+};
+
+/**
+ * struct spi_nor_erase_command - Used for non-uniform erases
+ * The structure is used to describe a list of erase commands to be executed
+ * once we validate that the erase can be performed. The elements in the list
+ * are run-length encoded.
+ * @list:		for inclusion into the list of erase commands.
+ * @count:		how many times the same erase command should be
+ *			consecutively used.
+ * @size:		the size of the sector/block erased by the command.
+ * @opcode:		the SPI command op code to erase the sector/block.
+ */
+struct spi_nor_erase_command {
+	struct list_head	list;
+	u32			count;
+	u32			size;
+	u8			opcode;
+};
+
+/**
+ * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
+ * @offset:		the offset in the data array of erase region start.
+ *			LSB bits are used as a bitmask encoding flags to
+ *			determine if this region is overlaid, if this region is
+ *			the last in the SPI NOR flash memory and to indicate
+ *			all the supported erase commands inside this region.
+ *			The erase types are sorted in ascending order with the
+ *			smallest Erase Type size being at BIT(0).
+ * @size:		the size of the region in bytes.
+ */
+struct spi_nor_erase_region {
+	u64		offset;
+	u64		size;
+};
+
+#define SNOR_ERASE_TYPE_MAX	4
+#define SNOR_ERASE_TYPE_MASK	GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
+
+#define SNOR_LAST_REGION	BIT(4)
+#define SNOR_OVERLAID_REGION	BIT(5)
+
+#define SNOR_ERASE_FLAGS_MAX	6
+#define SNOR_ERASE_FLAGS_MASK	GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
+
+#define SNOR_ERASE_FLAGS_OFFSET(_cmd_mask, _last_region, _overlaid_region, \
+				_offset)				\
+	((((u64)(_offset)) & ~SNOR_ERASE_FLAGS_MASK)	|		\
+	 (((u64)(_cmd_mask)) & SNOR_ERASE_TYPE_MASK)	|		\
+	 (((u64)(_last_region)) & SNOR_LAST_REGION)	|		\
+	 (((u64)(_overlaid_region)) & SNOR_OVERLAID_REGION))
+
+/**
+ * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
+ * @regions:		array of erase regions. The regions are consecutive in
+ *			address space. Walking through the regions is done
+ *			incrementally.
+ * @uniform_region:	a pre-allocated erase region for SPI NOR with a uniform
+ *			sector size (legacy implementation).
+ * @erase_type:		an array of erase types shared by all the regions.
+ *			The erase types are sorted in ascending order, with the
+ *			smallest Erase Type size being the first member in the
+ *			erase_type array.
+ * @uniform_erase_type:	bitmask encoding erase types that can erase the
+ *			entire memory. This member is completed at init by
+ *			uniform and non-uniform SPI NOR flash memories if they
+ *			support at least one erase type that can erase the
+ *			entire memory.
+ */
+struct spi_nor_erase_map {
+	struct spi_nor_erase_region	*regions;
+	struct spi_nor_erase_region	uniform_region;
+	struct spi_nor_erase_type	erase_type[SNOR_ERASE_TYPE_MAX];
+	u8				uniform_erase_type;
+};
+
+/**
  * struct flash_info - Forward declaration of a structure used internally by
  *		       spi_nor_scan()
  */
@@ -261,6 +356,7 @@ struct flash_info;
  * @write_proto:	the SPI protocol for write operations
  * @reg_proto		the SPI protocol for read_reg/write_reg/erase operations
  * @cmd_buf:		used by the write_reg
+ * @erase_map:		the erase map of the SPI NOR
  * @prepare:		[OPTIONAL] do some preparations for the
  *			read/write/erase/lock/unlock operations
  * @unprepare:		[OPTIONAL] do some post work after the
@@ -296,6 +392,7 @@ struct spi_nor {
 	bool			sst_write_second;
 	u32			flags;
 	u8			cmd_buf[SPI_NOR_MAX_CMD_SIZE];
+	struct spi_nor_erase_map	erase_map;
 
 	int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
 	void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
@@ -316,6 +413,18 @@ struct spi_nor {
 	void *priv;
 };
 
+#define spi_nor_region_is_last(region)  (region->offset & SNOR_LAST_REGION)
+
+static inline u64 spi_nor_region_end(const struct spi_nor_erase_region *region)
+{
+	return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
+}
+
+static inline bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
+{
+	return !!nor->erase_map.uniform_erase_type;
+}
+
 static inline void spi_nor_set_flash_node(struct spi_nor *nor,
 					  struct device_node *np)
 {
-- 
2.9.4

Powered by blists - more mailing lists