linux-kernel - Re: [PATCH v2 1/3] clk: meson: add DT documentation for emmc clock controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 12 Jul 2018 18:15:56 -0600
From:   Rob Herring <robh@...nel.org>
To:     Yixun Lan <yixun.lan@...ogic.com>
Cc:     Jerome Brunet <jbrunet@...libre.com>,
        Neil Armstrong <narmstrong@...libre.com>,
        Kevin Hilman <khilman@...libre.com>,
        Carlo Caione <carlo@...one.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Miquèl Raynal <miquel.raynal@...tlin.com>,
        Boris Brezillon <boris.brezillon@...tlin.com>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        Liang Yang <liang.yang@...ogic.com>,
        Qiufang Dai <qiufang.dai@...ogic.com>,
        Jian Hu <jian.hu@...ogic.com>,
        linux-clk <linux-clk@...r.kernel.org>,
        linux-amlogic@...ts.infradead.org,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v2 1/3] clk: meson: add DT documentation for emmc clock controller

On Thu, Jul 12, 2018 at 5:29 PM Yixun Lan <yixun.lan@...ogic.com> wrote:
>
> HI Rob
>
> see my comments
>
> On 07/12/2018 10:17 PM, Rob Herring wrote:
> > On Wed, Jul 11, 2018 at 8:47 PM Yixun Lan <yixun.lan@...ogic.com> wrote:
> >>
> >> Hi Rob
> >>
> >> see my comments
> >>
> >> On 07/12/18 03:43, Rob Herring wrote:
> >>> On Tue, Jul 10, 2018 at 04:36:56PM +0000, Yixun Lan wrote:
> >>>> Document the MMC sub clock controller driver, the potential consumer
> >>>> of this driver is MMC or NAND.
> >>>
> >>> So you all have decided to properly model this now?
> >>>
> >> Yes, ;-)
> >>
> >>>>
> >>>> Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
> >>>> ---
> >>>>  .../bindings/clock/amlogic,mmc-clkc.txt       | 31 +++++++++++++++++++
> >>>>  1 file changed, 31 insertions(+)
> >>>>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
> >>>> new file mode 100644
> >>>> index 000000000000..ff6b4bf3ecf9
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
> >>>> @@ -0,0 +1,31 @@
> >>>> +* Amlogic MMC Sub Clock Controller Driver
> >>>> +
> >>>> +The Amlogic MMC clock controller generates and supplies clock to support
> >>>> +MMC and NAND controller
> >>>> +
> >>>> +Required Properties:
> >>>> +
> >>>> +- compatible: should be:
> >>>> +            "amlogic,meson-gx-mmc-clkc"
> >>>> +            "amlogic,meson-axg-mmc-clkc"
> >>>> +
> >>>> +- #clock-cells: should be 1.
> >>>> +- clocks: phandles to clocks corresponding to the clock-names property
> >>>> +- clock-names: list of parent clock names
> >>>> +    - "clkin0", "clkin1"
> >>>> +
> >>>> +Parent node should have the following properties :
> >>>> +- compatible: "syscon", "simple-mfd, and "amlogic,meson-axg-mmc-clkc"
> >>>
> >>> You don't need "simple-mfd" and probably not syscon either. The order is
> >>> wrong too. Most specific first.
> >>>
> >> Ok, I will drop "simple-mfd"..
> >>
> >> but the syscon is a must, since this mmc clock model access registers
> >> via the regmap interface
> >
> > A syscon compatible should not be the only way to get a regmap.
> do you have any suggestion about other function that I can use? is
> devm_regmap_init_mmio() feasible
>
> > Removing lines 56/57 of drivers/mfd/syscon.c should be sufficient.
> >
> I'm not sure what's the valid point of removing compatible 'syscon' in
> driver/mfd/syscon.c, sounds this will break a lot DT/or need to fix?
> will you propose a patch for this? then I can certainly adjust here

Removing the 2 lines will simply allow any node to be a syscon. If
there's a specific driver for a node, then that makes sense to allow
that.

>
> > Why do you need a regmap in the first place? What else needs to access
> > this register directly?
> Yes, the SD_EMMC_CLOCK register contain several bits which not fit well
> into common clock model, and they need to be access in the NAND or eMMC
> driver itself, Martin had explained this in early thread[1]
>
> In this register
> Bit[31] select NAND or eMMC function
> Bit[25] enable SDIO IRQ
> Bit[24] Clock always on
> Bit[15:14] SRAM Power down
>
> [1]
> https://lkml.kernel.org/r/CAFBinCBeyXf6LNaZzAw6WnsxzDAv8E=Yp2eem0xCPWMEUi6pnQ@mail.gmail.com
>
> > Don't you need a patch removing the clock code
> > from within the emmc driver? It's not even using regmap, so using
> > regmap here doesn't help.
> >
> No, and current eMMC driver still use iomap to access the register

Which means a read-modify-write can corrupt the register value if both
users don't access thru regmap. Changes are probably infrequent enough
that you get lucky...

> I think we probably would like to take two steps approach.
> first, from the hardware perspective, the NAND and eMMC(port C) driver
> can't exist at same time, since they share the pins, clock, internal
> ram, So we have to only enable one of NAND or eMMC in DT, not enable
> both of them.

Yes, of course.

> Second, we might like to convert eMMC driver to also use mmc-clkc model.

IMO, this should be done as part of merging this series. Otherwise, we
have duplicated code for the same thing.

Rob