| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1531484574-9422-5-git-send-email-oleksandrs@mellanox.com>
Date: Fri, 13 Jul 2018 15:22:54 +0300
From: Oleksandr Shamray <oleksandrs@...lanox.com>
To: gregkh@...uxfoundation.org, arnd@...db.de
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, openbmc@...ts.ozlabs.org,
joel@....id.au, jiri@...nulli.us, tklauser@...tanz.ch,
linux-serial@...r.kernel.org, vadimp@...lanox.com,
system-sw-low-level@...lanox.com, robh+dt@...nel.org,
openocd-devel-owner@...ts.sourceforge.net,
linux-api@...r.kernel.org, davem@...emloft.net, mchehab@...nel.org,
Oleksandr Shamray <oleksandrs@...lanox.com>
Subject: [patch v27 4/4] Documentation: jtag: Add ABI documentation
Added document that describe the ABI for JTAG class drivrer
Signed-off-by: Oleksandr Shamray <oleksandrs@...lanox.com>
Acked-by: Arnd Bergmann <arnd@...db.de>
---
v25->v26
Comments pointed by Randy Dunlap <rdunlap@...radead.org>
- fix spell in ABI documentation
v24->v25
Comments pointed by Greg KH <gregkh@...uxfoundation.org>
- Fixed documentation according to new open() behavior
v23->v24
v22->v23
Comments pointed by Randy Dunlap <rdunlap@...radead.org>
- fix spell in ABI doccumentation
v21->v22
Comments pointed by Randy Dunlap <rdunlap@...radead.org>
- fix spell in ABI doccumentation
v20->v21
Comments pointed by Randy Dunlap <rdunlap@...radead.org>
- Fix JTAG dirver help in Kconfig
v19->v20
Comments pointed by Randy Dunlap <rdunlap@...radead.org>
- Fix JTAG doccumentation
v18->v19
Pavel Machek <pavel@....cz>
- Added JTAG doccumentation to Documentation/jtag
v17->v18
v16->v17
v15->v16
v14->v15
v13->v14
v12->v13
v11->v12 Tobias Klauser <tklauser@...tanz.ch>
Comments pointed by
- rename /Documentation/ABI/testing/jatg-dev -> jtag-dev
- Typo: s/interfase/interface
v10->v11
v9->v10
Fixes added by Oleksandr:
- change jtag-cdev to jtag-dev in documentation
- update KernelVersion and Date in jtag-dev documentation;
v8->v9
v7->v8
v6->v7
Comments pointed by Pavel Machek <pavel@....cz>
- Added jtag-cdev documentation to Documentation/ABI/testing folder
---
Documentation/ABI/testing/jtag-dev | 23 ++++++++
Documentation/jtag/overview | 27 +++++++++
Documentation/jtag/transactions | 109 ++++++++++++++++++++++++++++++++++++
MAINTAINERS | 1 +
4 files changed, 160 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/jtag-dev
create mode 100644 Documentation/jtag/overview
create mode 100644 Documentation/jtag/transactions
diff --git a/Documentation/ABI/testing/jtag-dev b/Documentation/ABI/testing/jtag-dev
new file mode 100644
index 0000000..423baab
--- /dev/null
+++ b/Documentation/ABI/testing/jtag-dev
@@ -0,0 +1,23 @@
+What: /dev/jtag[0-9]+
+Date: July 2018
+KernelVersion: 4.20
+Contact: oleksandrs@...lanox.com
+Description:
+ The misc device files /dev/jtag* are the interface
+ between JTAG master interface and userspace.
+
+ The ioctl(2)-based ABI is defined and documented in
+ [include/uapi]<linux/jtag.h>.
+
+ The following file operations are supported:
+
+ open(2)
+ Opens and allocates file descriptor.
+
+ ioctl(2)
+ Initiate various actions.
+ See the inline documentation in [include/uapi]<linux/jtag.h>
+ for descriptions of all ioctls.
+
+Users:
+ userspace tools which wants to access to JTAG bus
diff --git a/Documentation/jtag/overview b/Documentation/jtag/overview
new file mode 100644
index 0000000..3c39052
--- /dev/null
+++ b/Documentation/jtag/overview
@@ -0,0 +1,27 @@
+Linux kernel JTAG support
+=========================
+
+JTAG is an industry standard for verifying hardware. JTAG provides access to
+many logic signals of a complex integrated circuit, including the device pins.
+
+A JTAG interface is a special interface added to a chip.
+Depending on the version of JTAG, two, four, or five pins are added.
+
+The connector pins are:
+ TDI (Test Data In)
+ TDO (Test Data Out)
+ TCK (Test Clock)
+ TMS (Test Mode Select)
+ TRST (Test Reset) optional
+
+JTAG interface is designed to have two parts - basic core driver and
+hardware specific driver. The basic driver introduces a general interface
+which is not dependent of specific hardware. It provides communication
+between user space and hardware specific driver.
+Each JTAG device is represented as a char device from (jtag0, jtag1, ...).
+Access to a JTAG device is performed through IOCTL calls.
+
+Call flow example:
+User: open -> /dev/jatgX
+User: ioctl -> /dev/jtagX -> JTAG core driver -> JTAG hardware specific driver
+User: close -> /dev/jatgX
diff --git a/Documentation/jtag/transactions b/Documentation/jtag/transactions
new file mode 100644
index 0000000..e86fb73
--- /dev/null
+++ b/Documentation/jtag/transactions
@@ -0,0 +1,109 @@
+The JTAG API
+=============
+
+JTAG master devices can be accessed through a character misc-device.
+Each JTAG master interface can be accessed by using /dev/jtagN.
+
+JTAG system calls set:
+- SIR (Scan Instruction Register, IEEE 1149.1 Instruction Register scan);
+- SDR (Scan Data Register, IEEE 1149.1 Data Register scan);
+- RUNTEST (Forces the IEEE 1149.1 bus to a run state for a specified
+number of clocks.
+
+open(), close()
+-------
+open() opens JTAG device.
+
+Open/Close device:
+- jtag_fd = open("/dev/jtag0", O_RDWR);
+- close(jtag_fd);
+
+ioctl()
+-------
+All access operations to JTAG devices are performed through ioctl interface.
+The IOCTL interface supports these requests:
+ JTAG_IOCRUNTEST - Force JTAG state machine to RUN_TEST/IDLE state
+ JTAG_SIOCFREQ - Set JTAG TCK frequency
+ JTAG_GIOCFREQ - Get JTAG TCK frequency
+ JTAG_IOCXFER - send JTAG data Xfer
+ JTAG_GIOCSTATUS - get current JTAG TAP status
+ JTAG_SIOCMODE - set JTAG mode flags.
+
+JTAG_SIOCFREQ, JTAG_GIOCFREQ
+------
+Set/Get JTAG clock speed:
+
+ unsigned int jtag_fd;
+ ioctl(jtag_fd, JTAG_SIOCFREQ, &frq);
+ ioctl(jtag_fd, JTAG_GIOCFREQ, &frq);
+
+JTAG_IOCRUNTEST
+------
+Force JTAG state machine to RUN_TEST/IDLE state
+
+struct jtag_run_test_idle {
+ __u8 reset;
+ __u8 endstate;
+ __u8 tck;
+};
+
+reset:
+ JTAG_NO_RESET - run IDLE/PAUSE from current state
+ JTAG_FORCE_RESET - go through TEST_LOGIC/RESET state before IDLE/PAUSE
+endstate: completion flag
+tck: clock counter
+
+Example:
+ struct jtag_run_test_idle runtest;
+
+ runtest.endstate = JTAG_STATE_IDLE;
+ runtest.reset = 0;
+ runtest.tck = data_p->tck;
+ usleep(25 * 1000);
+ ioctl(jtag_fd, JTAG_IOCRUNTEST, &runtest);
+
+JTAG_IOCXFER
+------
+Send SDR/SIR transaction
+
+struct jtag_xfer {
+ __u8 type;
+ __u8 direction;
+ __u8 endstate;
+ __u8 padding;
+ __u32 length;
+ __u64 tdio;
+};
+
+type: transfer type - JTAG_SIR_XFER/JTAG_SDR_XFER
+direction: xfer direction - JTAG_SIR_XFER/JTAG_SDR_XFER
+length: xfer data length in bits
+tdio : xfer data array
+endstate: xfer end state after transaction finish
+ can be: JTAG_STATE_IDLE/JTAG_STATE_PAUSEIR/JTAG_STATE_PAUSEDR
+
+Example:
+ struct jtag_xfer xfer;
+ static char buf[64];
+ static unsigned int buf_len = 0;
+ [...]
+ xfer.type = JTAG_SDR_XFER;
+ xfer.tdio = (__u64)buf;
+ xfer.length = buf_len;
+ xfer.endstate = JTAG_STATE_IDLE;
+
+ if (is_read)
+ xfer.direction = JTAG_READ_XFER;
+ else
+ xfer.direction = JTAG_WRITE_XFER;
+
+ ioctl(jtag_fd, JTAG_IOCXFER, &xfer);
+
+JTAG_SIOCMODE
+------
+If hardware driver can support different running modes you can change it.
+
+Example:
+ unsigned int mode;
+ mode = JTAG_XFER_HW_MODE;
+ ioctl(jtag_fd, JTAG_SIOCMODE, &mode);
diff --git a/MAINTAINERS b/MAINTAINERS
index 169de71..0ae2cf8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7698,6 +7698,7 @@ F: include/linux/jtag.h
F: include/uapi/linux/jtag.h
F: drivers/jtag/
F: Documentation/devicetree/bindings/jtag/
+F: Documentation/ABI/testing/jtag-dev
K10TEMP HARDWARE MONITORING DRIVER
M: Clemens Ladisch <clemens@...isch.de>
--
1.7.1
Powered by blists - more mailing lists