linux-kernel - [PATCH v3 2/3] regulator: bd9571mwv: Add support for toggle power switches

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180713154720.18316-3-geert+renesas@glider.be>
Date:   Fri, 13 Jul 2018 17:47:19 +0200
From:   Geert Uytterhoeven <geert+renesas@...der.be>
To:     Marek Vasut <marek.vasut+renesas@...il.com>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>
Cc:     "Rafael J . Wysocki" <rjw@...ysocki.net>,
        Pavel Machek <pavel@....cz>, Len Brown <len.brown@...el.com>,
        linux-pm@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH v3 2/3] regulator: bd9571mwv: Add support for toggle power switches

Extend the existing support for backup mode to toggle power switches.
With a toggle power switch (or level signal), the following steps must
be followed exactly:
   1. Configure PMIC for backup mode,
   2. Switch accessory power switch off, to prepare for system suspend,
      which is a manual step not controlled by software,
   3. Suspend system,
   4. Switch accessory power switch on to wake up system.

Hence the PMIC is configured for backup mode when "on" or "1" is written
to the PMIC's "backup_mode" virtual file in sysfs.  Conversely, writing
"off" or "0" reverts the role of the accessory switch to a power
switch.

Unlike with momentary switches, backup mode is not enabled by default,
as enabling it prevents the board from being powered off using the power
switch, which may confuse the user.

Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
v3:
  - Replace use of "wake_up" sysfs file and extra callback for wake-up
    change notification by custom "backup_mode" sysfs file,

v2:
  - Improve patch description,
  - Drop "return;" at end of function.
---
 drivers/regulator/bd9571mwv-regulator.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
index 7432b605db4dc879..9b5df51751624d8b 100644
--- a/drivers/regulator/bd9571mwv-regulator.c
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -185,6 +185,7 @@ static ssize_t backup_mode_store(struct device *dev,
 				 const char *buf, size_t count)
 {
 	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+	unsigned int mode;
 	int ret;
 
 	if (!count)
@@ -194,6 +195,22 @@ static ssize_t backup_mode_store(struct device *dev,
 	if (ret)
 		return ret;
 
+	if (!bdreg->rstbmode_level)
+		return count;
+
+	/* Configure DDR Backup Mode */
+	ret = bd9571mwv_bkup_mode_read(bdreg->bd, &mode);
+	if (ret)
+		return ret;
+
+	mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK;
+	if (bdreg->bkup_mode_enabled)
+		mode |= bdreg->bkup_mode_cnt_keepon;
+
+	ret = bd9571mwv_bkup_mode_write(bdreg->bd, mode);
+	if (ret)
+		return ret;
+
 	return count;
 }
 
-- 
2.17.1