[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFXsbZpKyLjp0bO7MVR5StKf=3UkXUANydhM+8_13G3itRmE+Q@mail.gmail.com>
Date: Tue, 17 Jul 2018 07:55:12 -0700
From: Chris Healy <cphealy@...il.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: Andrey Smirnov <andrew.smirnov@...il.com>,
Shawn Guo <shawnguo@...nel.org>, devicetree@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>,
Fabio Estevam <fabio.estevam@....com>,
linux ARM <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] ARM: dts: vf610: Add ZII SSMB SPU3 board
On Tue, Jul 17, 2018 at 7:46 AM, Andrew Lunn <andrew@...n.ch> wrote:
> On Mon, Jul 16, 2018 at 09:06:51PM -0700, Andrey Smirnov wrote:
>> Add support for Zodiac Inflight Innovations SSMB SPU3
>> board (VF610-based).
>>
>> Cc: Shawn Guo <shawnguo@...nel.org>
>> Cc: Fabio Estevam <fabio.estevam@....com>
>> Cc: cphealy@...il.com
>> Cc: linux-arm-kernel@...ts.infradead.org
>> Cc: devicetree@...r.kernel.org
>> Cc: linux-kernel@...r.kernel.org
>> Signed-off-by: Andrew Lunn <andrew@...n.ch>
>> Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
>> ---
>> arch/arm/boot/dts/Makefile | 3 +-
>> arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 343 ++++++++++++++++++++++
>> 2 files changed, 345 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index bea41b129493..e331b2c16539 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -570,7 +570,8 @@ dtb-$(CONFIG_SOC_VF610) += \
>> vf610m4-cosmic.dtb \
>> vf610-twr.dtb \
>> vf610-zii-dev-rev-b.dtb \
>> - vf610-zii-dev-rev-c.dtb
>> + vf610-zii-dev-rev-c.dtb \
>> + vf610-zii-ssmb-spu3.dtb
>> dtb-$(CONFIG_ARCH_MXS) += \
>> imx23-evk.dtb \
>> imx23-olinuxino.dtb \
>> diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
>> new file mode 100644
>> index 000000000000..b692117d7839
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
>> @@ -0,0 +1,343 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +
>> +/*
>> + * Device tree file for ZII's SSMB SPU3 board
>> + *
>> + * SSMB - SPU3 Switch Management Board
>> + * SPU - Seat Power Unit
>
> I think this is the first Zodiac board with mutually recursive
> acronyms.
>
> Probably a question for Chris: Does SSMB specifically refer to version
> 3 of the SPU?
>
> Andrew
SPU3 is the third generation of seat power unit.
SSMB is the SPU3 Switch Management Board.
So, SSMB is a backronym. This naming scheme breaks down a bit though
when follow on designs (that are not the SPU3) also use the SSMB, but
that's what it is... ;-)
Powered by blists - more mailing lists