[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180718200709.27102-2-manivannan.sadhasivam@linaro.org>
Date: Thu, 19 Jul 2018 01:37:06 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: vkoul@...nel.org, dan.j.williams@...el.com, afaerber@...e.de,
robh+dt@...nel.org
Cc: dmaengine@...r.kernel.org, liuwei@...ions-semi.com,
96boards@...obotics.com, devicetree@...r.kernel.org,
daniel.thompson@...aro.org, amit.kucheria@...aro.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
hzhang@...obotics.com, bdong@...obotics.com,
manivannanece23@...il.com, thomas.liau@...ions-semi.com,
jeff.chen@...ions-semi.com, pn@...x.de, edgar.righi@...tec.org.br,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 1/4] dt-bindings: dma: Add binding for Actions Semi Owl SoCs
Add devicetree binding for Actions Semi Owl SoCs DMA controller.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
.../devicetree/bindings/dma/owl-dma.txt | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/owl-dma.txt
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.txt b/Documentation/devicetree/bindings/dma/owl-dma.txt
new file mode 100644
index 000000000000..dd6ce237b216
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/owl-dma.txt
@@ -0,0 +1,46 @@
+* Actions Semi Owl SoCs DMA controller
+
+This binding follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+- compatible: Should be "actions,s900-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain 4 interrupts shared by all channel.
+- #dma-cells: Must be <1>. Used to represent the number of integer
+ cells in the dmas property of client device.
+- dma-channels: Physical channels supported.
+- dma-requests: Virtual channels supported.
+- clocks: Phandle and Specifier of the clock feeding the DMA controller.
+
+Example:
+
+Controller:
+ dma: dma-controller@...60000 {
+ compatible = "actions,s900-dma";
+ reg = <0x0 0xe0260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <12>;
+ dma-requests = <46>;
+ clocks = <&clock CLK_DMAC>;
+ };
+
+Client:
+
+DMA clients connected to the Actions Semi Owl SoCs DMA controller must
+use the format described in the dma.txt file, using a two-cell specifier
+for each channel.
+
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. The channel id.
+
+uart5: serial@...2a000 {
+ ...
+ dma-names = "tx", "rx";
+ dmas = <&dma 26>, <&dma 27>;
+ ...
+};
--
2.17.1
Powered by blists - more mailing lists