[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <d263ed254f53a7e79c19ff471b5873a6f5eafd4d.1531895128.git.amit.kucheria@linaro.org>
Date: Wed, 18 Jul 2018 12:13:13 +0530
From: Amit Kucheria <amit.kucheria@...aro.org>
To: linux-kernel@...r.kernel.org
Cc: rnayak@...eaurora.org, linux-arm-msm@...r.kernel.org,
bjorn.andersson@...aro.org, edubezval@...il.com,
smohanad@...eaurora.org, vivek.gautam@...eaurora.org,
andy.gross@...aro.org, dianders@...omium.org, mka@...omium.org,
David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v8 7/7] arm64: dts: sdm845: Add tsens nodes
SDM845 has two tsens blocks, one with 13 sensors and the other with 8
sensors. It uses version 2 of the TSENS IP, so use the fallback property to
allow more common code.
Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Tested-by: Matthias Kaehlcke <mka@...omium.org>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb..01ff146 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -221,6 +221,22 @@
#interrupt-cells = <2>;
};
+ tsens0: thermal-sensor@...3000 {
+ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+ reg = <0xc263000 0x1ff>, /* TM */
+ <0xc222000 0x1ff>; /* SROT */
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@...5000 {
+ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+ reg = <0xc265000 0x1ff>, /* TM */
+ <0xc223000 0x1ff>; /* SROT */
+ #qcom,sensors = <8>;
+ #thermal-sensor-cells = <1>;
+ };
+
spmi_bus: spmi@...0000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0x1100>,
--
2.7.4
Powered by blists - more mailing lists