linux-kernel - Re: [PATCH] backlight: pwm_bl: Fix uninitialized variable

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180718081252.GC4641@dell>
Date:   Wed, 18 Jul 2018 09:12:52 +0100
From:   Lee Jones <lee.jones@...aro.org>
To:     Daniel Thompson <daniel.thompson@...aro.org>
Cc:     Jingoo Han <jingoohan1@...il.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        linux-pwm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        linux-fbdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        patches@...aro.org, Marcel Ziswiler <marcel.ziswiler@...adex.com>
Subject: Re: [PATCH] backlight: pwm_bl: Fix uninitialized variable

On Wed, 18 Jul 2018, Lee Jones wrote:

> On Mon, 16 Jul 2018, Daniel Thompson wrote:
> 
> > Currently, if the DT does not define num-interpolated-steps then
> > num_steps is undefined and the interpolation code will deploy randomly.
> > Fix this.
> > 
> > Fixes: 573fe6d1c25c ("backlight: pwm_bl: Linear interpolation between
> > brightness-levels")
> > Reported-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
> > Signed-off-by: Daniel Thompson <daniel.thompson@...aro.org>
> > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
> 
> This line is confusing.  Did you guys author this patch together?
> 
> My guess is that this line should be dropped and the RB and TB tags
> should remain?  If it was reviewed too, perhaps an AB too?
> 
> > Tested-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
> > ---
> >  drivers/video/backlight/pwm_bl.c | 17 ++++++++---------
> >  1 file changed, 8 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> > index 9ee4c1b735b2..e3c22b79fbcd 100644
> > --- a/drivers/video/backlight/pwm_bl.c
> > +++ b/drivers/video/backlight/pwm_bl.c
> > @@ -299,15 +299,14 @@ static int pwm_backlight_parse_dt(struct device *dev,
> >  		 * interpolation between each of the values of brightness levels
> >  		 * and creates a new pre-computed table.
> >  		 */
> > -		of_property_read_u32(node, "num-interpolated-steps",
> > -				     &num_steps);
> > -
> > -		/*
> > -		 * Make sure that there is at least two entries in the
> > -		 * brightness-levels table, otherwise we can't interpolate
> > -		 * between two points.
> > -		 */
> > -		if (num_steps) {
> > +		if ((of_property_read_u32(node, "num-interpolated-steps",
> > +					  &num_steps) == 0) && num_steps) {
> 
> This is pretty ugly, and isn't it suffering from over-bracketing?  My
> suggestion would be to break out the invocation of
> of_property_read_u32() from the if and test only the result.
> 
> 		of_property_read_u32(node, "num-interpolated-steps", &num_steps);
> 		if (!ret && num_steps) {

Whoops!  I was playing around with the 80-char limit and forgot to
revert.  The lines should read:

 		ret = of_property_read_u32(node, "num-interpolated-steps",
					   &num_steps);
 		if (!ret && num_steps) {

> I haven't checked the underling code, but is it even feasible for
> of_property_read_u32() to not succeed AND for num_steps to be set?
> 
> If not, the check for !ret if superfluous and you can drop it.
> 
> > +			/*
> > +			 * Make sure that there is at least two entries in the
> 
> s/is/are/
> 
> > +			 * brightness-levels table, otherwise we can't
> > +			 * interpolate
> 
> Why break the line here?
> 
> > +			 * between two points.
> > +			 */
> >  			if (data->max_brightness < 2) {
> >  				dev_err(dev, "can't interpolate\n");
> >  				return -EINVAL;
> 

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog