| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1fflWa-0007CO-09@debutante>
Date: Wed, 18 Jul 2018 13:25:44 +0100
From: Mark Brown <broonie@...nel.org>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Mark Brown <broonie@...nel.org>, Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Kevin Hilman <khilman@...libre.com>,
Carlo Caione <carlo@...one.org>, devicetree@...r.kernel.org,
alsa-devel@...a-project.org, linux-amlogic@...ts.infradead.org,
linux-kernel@...r.kernel.org, alsa-devel@...a-project.org
Subject: Applied "ASoC: meson: add axg toddr driver" to the asoc tree
The patch
ASoC: meson: add axg toddr driver
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 7ed4877b403c9343a8e2c7581d9bcfceef0f40cf Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@...libre.com>
Date: Tue, 17 Jul 2018 17:42:53 +0200
Subject: [PATCH] ASoC: meson: add axg toddr driver
Add the capture memory interface of Amlogic's axg SoCs.
TDM, SPDIF or PDM input devices place audio samples inside this FIFO.
The FIFO content is then pushed to DDR
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
sound/soc/meson/Kconfig | 7 ++
sound/soc/meson/Makefile | 2 +
sound/soc/meson/axg-toddr.c | 199 ++++++++++++++++++++++++++++++++++++
3 files changed, 208 insertions(+)
create mode 100644 sound/soc/meson/axg-toddr.c
diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig
index cdd78f62e8d7..3916060edcae 100644
--- a/sound/soc/meson/Kconfig
+++ b/sound/soc/meson/Kconfig
@@ -12,4 +12,11 @@ config SND_MESON_AXG_FRDDR
Select Y or M to add support for the frontend playback interfaces
embedded in the Amlogic AXG SoC family
+config SND_MESON_AXG_TODDR
+ tristate "Amlogic AXG Capture FIFO support"
+ select SND_MESON_AXG_FIFO
+ help
+ Select Y or M to add support for the frontend capture interfaces
+ embedded in the Amlogic AXG SoC family
+
endmenu
diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile
index 9c5d7d4a8e33..12edf2db2a24 100644
--- a/sound/soc/meson/Makefile
+++ b/sound/soc/meson/Makefile
@@ -2,6 +2,8 @@
snd-soc-meson-axg-fifo-objs := axg-fifo.o
snd-soc-meson-axg-frddr-objs := axg-frddr.o
+snd-soc-meson-axg-toddr-objs := axg-toddr.o
obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o
obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o
+obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o
diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c
new file mode 100644
index 000000000000..c2c9bb312586
--- /dev/null
+++ b/sound/soc/meson/axg-toddr.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (c) 2018 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@...libre.com>
+
+/* This driver implements the frontend capture DAI of AXG based SoCs */
+
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+#include "axg-fifo.h"
+
+#define CTRL0_TODDR_SEL_RESAMPLE BIT(30)
+#define CTRL0_TODDR_EXT_SIGNED BIT(29)
+#define CTRL0_TODDR_PP_MODE BIT(28)
+#define CTRL0_TODDR_TYPE_MASK GENMASK(15, 13)
+#define CTRL0_TODDR_TYPE(x) ((x) << 13)
+#define CTRL0_TODDR_MSB_POS_MASK GENMASK(12, 8)
+#define CTRL0_TODDR_MSB_POS(x) ((x) << 8)
+#define CTRL0_TODDR_LSB_POS_MASK GENMASK(7, 3)
+#define CTRL0_TODDR_LSB_POS(x) ((x) << 3)
+
+static int axg_toddr_pcm_new(struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_dai *dai)
+{
+ return axg_fifo_pcm_new(rtd, SNDRV_PCM_STREAM_CAPTURE);
+}
+
+static int axg_toddr_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
+ unsigned int type, width, msb = 31;
+
+ /*
+ * NOTE:
+ * Almost all backend will place the MSB at bit 31, except SPDIF Input
+ * which will put it at index 28. When adding support for the SPDIF
+ * Input, we'll need to find which type of backend we are connected to.
+ */
+
+ switch (params_physical_width(params)) {
+ case 8:
+ type = 0; /* 8 samples of 8 bits */
+ break;
+ case 16:
+ type = 2; /* 4 samples of 16 bits - right justified */
+ break;
+ case 32:
+ type = 4; /* 2 samples of 32 bits - right justified */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ width = params_width(params);
+
+ regmap_update_bits(fifo->map, FIFO_CTRL0,
+ CTRL0_TODDR_TYPE_MASK |
+ CTRL0_TODDR_MSB_POS_MASK |
+ CTRL0_TODDR_LSB_POS_MASK,
+ CTRL0_TODDR_TYPE(type) |
+ CTRL0_TODDR_MSB_POS(msb) |
+ CTRL0_TODDR_LSB_POS(msb - (width - 1)));
+
+ return 0;
+}
+
+static int axg_toddr_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
+ unsigned int fifo_threshold;
+ int ret;
+
+ /* Enable pclk to access registers and clock the fifo ip */
+ ret = clk_prepare_enable(fifo->pclk);
+ if (ret)
+ return ret;
+
+ /* Select orginal data - resampling not supported ATM */
+ regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_SEL_RESAMPLE, 0);
+
+ /* Only signed format are supported ATM */
+ regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_EXT_SIGNED,
+ CTRL0_TODDR_EXT_SIGNED);
+
+ /* Apply single buffer mode to the interface */
+ regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_PP_MODE, 0);
+
+ /* TODDR does not have a configurable fifo depth */
+ fifo_threshold = AXG_FIFO_MIN_CNT - 1;
+ regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_THRESHOLD_MASK,
+ CTRL1_THRESHOLD(fifo_threshold));
+
+ return 0;
+}
+
+static void axg_toddr_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
+
+ clk_disable_unprepare(fifo->pclk);
+}
+
+static const struct snd_soc_dai_ops axg_toddr_ops = {
+ .hw_params = axg_toddr_dai_hw_params,
+ .startup = axg_toddr_dai_startup,
+ .shutdown = axg_toddr_dai_shutdown,
+};
+
+static struct snd_soc_dai_driver axg_toddr_dai_drv = {
+ .name = "TODDR",
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = AXG_FIFO_CH_MAX,
+ .rates = AXG_FIFO_RATES,
+ .formats = AXG_FIFO_FORMATS,
+ },
+ .ops = &axg_toddr_ops,
+ .pcm_new = axg_toddr_pcm_new,
+};
+
+static const char * const axg_toddr_sel_texts[] = {
+ "IN 0", "IN 1", "IN 2", "IN 3", "IN 4", "IN 6"
+};
+
+static const unsigned int axg_toddr_sel_values[] = {
+ 0, 1, 2, 3, 4, 6
+};
+
+static SOC_VALUE_ENUM_SINGLE_DECL(axg_toddr_sel_enum, FIFO_CTRL0,
+ CTRL0_SEL_SHIFT, CTRL0_SEL_MASK,
+ axg_toddr_sel_texts, axg_toddr_sel_values);
+
+static const struct snd_kcontrol_new axg_toddr_in_mux =
+ SOC_DAPM_ENUM("Input Source", axg_toddr_sel_enum);
+
+static const struct snd_soc_dapm_widget axg_toddr_dapm_widgets[] = {
+ SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_toddr_in_mux),
+ SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 4", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 6", NULL, 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route axg_toddr_dapm_routes[] = {
+ { "Capture", NULL, "SRC SEL" },
+ { "SRC SEL", "IN 0", "IN 0" },
+ { "SRC SEL", "IN 1", "IN 1" },
+ { "SRC SEL", "IN 2", "IN 2" },
+ { "SRC SEL", "IN 3", "IN 3" },
+ { "SRC SEL", "IN 4", "IN 4" },
+ { "SRC SEL", "IN 6", "IN 6" },
+};
+
+static const struct snd_soc_component_driver axg_toddr_component_drv = {
+ .dapm_widgets = axg_toddr_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(axg_toddr_dapm_widgets),
+ .dapm_routes = axg_toddr_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(axg_toddr_dapm_routes),
+ .ops = &axg_fifo_pcm_ops
+};
+
+static const struct axg_fifo_match_data axg_toddr_match_data = {
+ .component_drv = &axg_toddr_component_drv,
+ .dai_drv = &axg_toddr_dai_drv
+};
+
+static const struct of_device_id axg_toddr_of_match[] = {
+ {
+ .compatible = "amlogic,axg-toddr",
+ .data = &axg_toddr_match_data,
+ }, {}
+};
+MODULE_DEVICE_TABLE(of, axg_toddr_of_match);
+
+static struct platform_driver axg_toddr_pdrv = {
+ .probe = axg_fifo_probe,
+ .driver = {
+ .name = "axg-toddr",
+ .of_match_table = axg_toddr_of_match,
+ },
+};
+module_platform_driver(axg_toddr_pdrv);
+
+MODULE_DESCRIPTION("Amlogic AXG capture fifo driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet@...libre.com>");
+MODULE_LICENSE("GPL v2");
--
2.18.0
Powered by blists - more mailing lists