[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180718001554.GH129942@google.com>
Date: Tue, 17 Jul 2018 17:15:54 -0700
From: Matthias Kaehlcke <mka@...omium.org>
To: Amit Kucheria <amit.kucheria@...aro.org>
Cc: linux-kernel@...r.kernel.org, rnayak@...eaurora.org,
linux-arm-msm@...r.kernel.org, bjorn.andersson@...aro.org,
edubezval@...il.com, smohanad@...eaurora.org,
vivek.gautam@...eaurora.org, andy.gross@...aro.org,
dianders@...omium.org, David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v7 7/7] arm64: dts: sdm845: Add tsens nodes
On Thu, Jul 12, 2018 at 02:09:08PM +0530, Amit Kucheria wrote:
> SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> sensors. It uses version 2 of the TSENS IP, so use the fallback property to
> allow more common code.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Tested-by: Matthias Kaehlcke <mka@...omium.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb..01ff146 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -221,6 +221,22 @@
> #interrupt-cells = <2>;
> };
>
> + tsens0: thermal-sensor@...3000 {
> + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> + reg = <0xc263000 0x1ff>, /* TM */
> + <0xc222000 0x1ff>; /* SROT */
> + #qcom,sensors = <13>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: thermal-sensor@...5000 {
> + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> + reg = <0xc265000 0x1ff>, /* TM */
> + <0xc223000 0x1ff>; /* SROT */
> + #qcom,sensors = <8>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> spmi_bus: spmi@...0000 {
> compatible = "qcom,spmi-pmic-arb";
> reg = <0xc440000 0x1100>,
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
Powered by blists - more mailing lists