[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1531994747-15196-3-git-send-email-manish.narani@xilinx.com>
Date: Thu, 19 Jul 2018 15:35:45 +0530
From: Manish Narani <manish.narani@...inx.com>
To: <linux-kernel@...r.kernel.org>, <michal.simek@...inx.com>,
<bp@...en8.de>, <mchehab@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-edac@...r.kernel.org>
CC: <anirudh@...inx.com>, <sgoud@...inx.com>,
Manish Narani <manish.narani@...inx.com>
Subject: [PATCH 2/4] dt: bindings: Document ZynqMP DDRC in Synopsys documentation
This patch documents Synopsys EDAC driver which reports the single bit
errors that are corrected and the double bit errors that are detected.
Signed-off-by: Manish Narani <manish.narani@...inx.com>
---
.../bindings/memory-controllers/synopsys.txt | 25 ++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
index a43d26d..5d20b76 100644
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
@@ -1,15 +1,32 @@
Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
-This controller has an optional ECC support in half-bus width (16-bit)
-configuration. The ECC controller corrects one bit error and detects
+Synopsys EDAC driver, it does reports the DDR ECC single bit errors
+that are corrected and double bit ecc errors that are detected by the DDR
+ECC controller.
+
+The Zynq DDR ECC controller has an optional ECC support in half-bus width
+(16-bit) configuration. The ECC controller corrects one bit error and detects
two bit errors.
Required properties:
- - compatible: Should be 'xlnx,zynq-ddrc-a05'
- - reg: Base address and size of the controllers memory area
+ - compatible: One of:
+ - 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller
+ - 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller
+ - reg: Should contain DDR controller registers location and length.
+
+Required properties for "xlnx,zynqmp-ddrc-2.40a":
+ - interrupt-parent: Should be core interrupt controller.
+ - interrupts: Property with a value describing the interrupt number.
Example:
memory-controller@...06000 {
compatible = "xlnx,zynq-ddrc-a05";
reg = <0xf8006000 0x1000>;
};
+
+ mc: memory-controller@...70000 {
+ compatible = "xlnx,zynqmp-ddrc-2.40a";
+ reg = <0x0 0xfd070000 0x0 0x30000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 112 4>;
+ };
--
2.1.1
Powered by blists - more mailing lists