| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180719134359.23714-1-mircea.caprioru@analog.com>
Date: Thu, 19 Jul 2018 16:43:59 +0300
From: Mircea Caprioru <mircea.caprioru@...log.com>
To: <peda@...ntia.se>
CC: <davem@...emloft.net>, <mchehab+samsung@...nel.org>,
<akpm@...ux-foundation.org>, <rdunlap@...radead.org>,
<linux-kernel@...r.kernel.org>,
Mircea Caprioru <mircea.caprioru@...log.com>
Subject: [PATCH V3 2/2] mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux …
This patch adds basic support for Analog Device ADGS1408/09 SPI mux
controller.
The device is probed and set to a disabled state. It uses the new mux
controller framework.
Signed-off-by: Mircea Caprioru <mircea.caprioru@...log.com>
---
Changelog V2 -> V3
- removed Kconfig line
- changed to GPL-2.0-or-later
- fixed typo in ADGS1408
- moved spi #include after linux/property.h
- added trailing comma
- reverted back to .of_match_table
- removed duplicated logic inside switch statement
drivers/mux/Kconfig | 10 ++++
drivers/mux/Makefile | 2 +
drivers/mux/adgs1408.c | 128 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 140 insertions(+)
create mode 100644 drivers/mux/adgs1408.c
diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
index 6241678e99af..7659d6c5f718 100644
--- a/drivers/mux/Kconfig
+++ b/drivers/mux/Kconfig
@@ -21,6 +21,16 @@ config MUX_ADG792A
To compile the driver as a module, choose M here: the module will
be called mux-adg792a.
+config MUX_ADGS1408
+ tristate "Analog Devices ADGS1408/ADGS1409 Multiplexers"
+ depends on SPI
+ help
+ ADGS1408 8:1 multiplexer and ADGS1409 double 4:1 multiplexer
+ switches.
+
+ To compile the driver as a module, choose M here: the module will
+ be called mux-adgs1408.
+
config MUX_GPIO
tristate "GPIO-controlled Multiplexer"
depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile
index c3d883955fd5..6e9fa47daf56 100644
--- a/drivers/mux/Makefile
+++ b/drivers/mux/Makefile
@@ -5,10 +5,12 @@
mux-core-objs := core.o
mux-adg792a-objs := adg792a.o
+mux-adgs1408-objs := adgs1408.o
mux-gpio-objs := gpio.o
mux-mmio-objs := mmio.o
obj-$(CONFIG_MULTIPLEXER) += mux-core.o
obj-$(CONFIG_MUX_ADG792A) += mux-adg792a.o
+obj-$(CONFIG_MUX_ADGS1408) += mux-adgs1408.o
obj-$(CONFIG_MUX_GPIO) += mux-gpio.o
obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
diff --git a/drivers/mux/adgs1408.c b/drivers/mux/adgs1408.c
new file mode 100644
index 000000000000..2722fb466e38
--- /dev/null
+++ b/drivers/mux/adgs1408.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ADGS1408/ADGS1409 SPI MUX driver
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mux/driver.h>
+#include <linux/of_platform.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+
+#define ADGS1408_SW_DATA (0x01)
+#define ADGS1408_REG_READ(reg) ((reg) | 0x80)
+#define ADGS1408_DISABLE (0x00)
+#define ADGS1408_MUX(state) (((state) << 1) | 1)
+
+enum {
+ ADGS1408,
+ ADGS1409,
+};
+
+static int adgs1408_spi_reg_write(struct spi_device *spi,
+ u8 reg_addr, u8 reg_data)
+{
+ u8 tx_buf[2];
+
+ tx_buf[0] = reg_addr;
+ tx_buf[1] = reg_data;
+
+ return spi_write_then_read(spi, tx_buf, sizeof(tx_buf), NULL, 0);
+}
+
+static int adgs1408_set(struct mux_control *mux, int state)
+{
+ struct spi_device *spi = to_spi_device(mux->chip->dev.parent);
+ u8 reg;
+
+ if (state == MUX_IDLE_DISCONNECT)
+ reg = ADGS1408_DISABLE;
+ else
+ reg = ADGS1408_MUX(state);
+
+ return adgs1408_spi_reg_write(spi, ADGS1408_SW_DATA, reg);
+}
+
+static const struct mux_control_ops adgs1408_ops = {
+ .set = adgs1408_set,
+};
+
+static int adgs1408_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct device *dev = &spi->dev;
+ struct mux_chip *mux_chip;
+ struct mux_control *mux;
+ int ret, idle_state;
+
+ mux_chip = devm_mux_chip_alloc(dev, 1, 0);
+ if (IS_ERR(mux_chip))
+ return PTR_ERR(mux_chip);
+
+ mux_chip->ops = &adgs1408_ops;
+
+ ret = adgs1408_spi_reg_write(spi, ADGS1408_SW_DATA, ADGS1408_DISABLE);
+ if (ret < 0)
+ return ret;
+
+ ret = device_property_read_u32_array(dev, "idle-state",
+ &idle_state,
+ mux_chip->controllers);
+ if (ret < 0)
+ idle_state = MUX_IDLE_AS_IS;
+
+ mux = mux_chip->mux;
+
+ if (id->driver_data == ADGS1408)
+ mux->states = 8;
+ else
+ mux->states = 4;
+
+ switch (idle_state) {
+ case MUX_IDLE_DISCONNECT:
+ case MUX_IDLE_AS_IS:
+ case 0 ... 7:
+ /* adgs1409 supports only 4 states */
+ if (idle_state < mux->states) {
+ mux->idle_state = idle_state;
+ break;
+ }
+ /* fall through */
+ default:
+ dev_err(dev, "invalid idle-state %d\n", idle_state);
+ return -EINVAL;
+ }
+
+ return devm_mux_chip_register(dev, mux_chip);
+}
+
+static const struct spi_device_id adgs1408_id[] = {
+ { "adgs1408", ADGS1408 },
+ { "adgs1409", ADGS1409 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, adgs1408_id);
+
+static const struct of_device_id adgs1408_of_match[] = {
+ { .compatible = "adi,adgs1408", },
+ { .compatible = "adi,adgs1409", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adgs1408_of_match);
+
+static struct spi_driver adgs1408_driver = {
+ .driver = {
+ .name = "adgs1408",
+ .of_match_table = of_match_ptr(adgs1408_of_match),
+ },
+ .probe = adgs1408_probe,
+ .id_table = adgs1408_id,
+};
+module_spi_driver(adgs1408_driver);
+
+MODULE_AUTHOR("Mircea Caprioru <mircea.caprioru@...log.com>");
+MODULE_DESCRIPTION("Analog Devices ADGS1408 MUX driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1
Powered by blists - more mailing lists