| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180719230026.8741-1-miquel.raynal@bootlin.com>
Date: Fri, 20 Jul 2018 00:59:53 +0200
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Wenyou Yang <wenyou.yang@...rochip.com>,
Josh Wu <rainyfeeling@...look.com>,
Tudor Ambarus <Tudor.Ambarus@...rochip.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Kamal Dasu <kdasu.kdev@...il.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Han Xu <han.xu@....com>,
Harvey Hunt <harveyhuntnexus@...il.com>,
Vladimir Zapolskiy <vz@...ia.com>,
Sylvain Lemieux <slemieux.tyco@...il.com>,
Xiaolei Li <xiaolei.li@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>,
Marc Gonzalez <marc.w.gonzalez@...e.fr>,
Mans Rullgard <mans@...sr.com>, Stefan Agner <stefan@...er.ch>
Cc: linux-mtd@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
linux-mediatek@...ts.infradead.org
Subject: [PATCH v3 00/33] Allow dynamic allocations during NAND chip identification phase
Hello,
This series make a quite deep change in the NAND framework. Until now,
the NAND chip identification phase could be done in two manners from the
controller driver perspective:
1/ Call nand_scan()
or
1/ Call nand_scan_ident()
2/ Do some controller-dependent configuration
3/ Call nand_scan_tail().
The fact that the identifaction could be split in two operations
involved that in the NAND framework, it was not possible to do any
dynamic allocation without risking a memory leak. What if the core
allocates a structure, then the driver between nand_scan_ident() and
nand_scan_tail() decides it cannot handle the chip and errors out?
The structure allocated by the core is lost: it is a memory leak. One
solution could have been to add a nand_scan_ident_cleanup() function,
but that would mean patching all the drivers anyway to make them call
this function when something fails between nand_scan_ident() and
nand_scan_tail().
To avoid this situation, we migrate all drivers to use nand_scan() in
conjuction with the recently added hooks ->attach_chip() and
->detach_chip() that are part of the nand_controller structure
operations. Drivers that need to tweak their configuration after
nand_scan_ident() should implement it. Any dynamically allocated space
in ->attach_chip() must be freed in the second hook: ->detach_chip().
The ->detach_chip() does not have to be called upon error in the
controller driver probe function. The nand_cleanup() helper already
exists for that and will do the call if needed. Of course, this helper
must be called on error after a successful nand_scan(), just like
before.
Once all drivers not using nand_scan() are migrated, nand_scan_ident()
and nand_scan_tail() are unexported and only available internally.
A previous work [1] removed the ONFI/JEDEC parameter pages and instead
allocated a nand_parameters structure in nand_chip, embedding both
generic entries and ONFI-related ones. The deal was, once dynamic
allocation possible, allocate in nand_scan_ident() the ONFI strcuture
only if actually needed. This is done in the last patches.
This series applies on top of nand/next.
Thank you,
Miquèl
[1] http://lists.infradead.org/pipermail/linux-mtd/2018-March/079456.html
Changes since v2:
=================
* Rebased on top of nand/next.
* Adapted all drivers to declare statically a nand_controller_ops
structure and assign it in the probe().
* Added the migration of the tegra_nand.c driver.
* Moved brcmnand controller ops affectation in the probe().
Changes since v1:
=================
* Rebased on top of nand/next.
* Light rewording of the cover letter about the possibility to have a
nand_scan_ident_cleanup() function (just as example of how this series
could have been done differently).
* Changed the hooks to reside in the nand_hw_ctrl structure instead of
being part of nand_ecc_ctrl as these hooks are more
controller-related.
Miquel Raynal (33):
mtd: rawnand: brcmnand: convert driver to nand_scan()
mtd: rawnand: cafe: convert driver to nand_scan()
mtd: rawnand: davinci: convert driver to nand_scan()
mtd: rawnand: denali: convert to nand_scan()
mtd: rawnand: fsl_elbc: convert driver to nand_scan()
mtd: rawnand: fsl_ifc: convert driver to nand_scan()
mtd: rawnand: fsmc: convert driver to nand_scan()
mtd: rawnand: gpmi: convert driver to nand_scan()
mtd: rawnand: hisi504: convert driver to nand_scan()
mtd: rawnand: jz4780: convert driver to nand_scan()
mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()
mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
mtd: rawnand: marvell: convert driver to nand_scan()
mtd: rawnand: mtk: convert driver to nand_scan()
mtd: rawnand: mxc: convert driver to nand_scan()
mtd: rawnand: nandsim: convert driver to nand_scan()
mtd: rawnand: omap2: convert driver to nand_scan()
mtd: rawnand: s3c2410: convert driver to nand_scan()
mtd: rawnand: sh_flctl: move all NAND chip related setup in one
function
mtd: rawnand: sh_flctl: convert driver to nand_scan()
mtd: rawnand: sunxi: convert driver to nand_scan()
mtd: rawnand: tango: convert driver to nand_scan()
mtd: rawnand: txx9ndfmc: rename nand controller internal structure
mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
mtd: rawnand: vf610: convert driver to nand_scan()
mtd: rawnand: atmel: convert driver to nand_scan()
mtd: rawnand: sm_common: convert driver to nand_scan_with_ids()
mtd: rawnand: docg4: convert driver to nand_scan()
mtd: rawnand: qcom: convert driver to nand_scan()
mtd: rawnand: jz4740: convert driver to nand_scan()
mtd: rawnand: tegra: convert driver to nand_scan()
mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
mtd: rawnand: allocate dynamically ONFI parameters during detection
drivers/mtd/nand/raw/atmel/nand-controller.c | 83 ++---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 47 ++-
drivers/mtd/nand/raw/cafe_nand.c | 130 ++++---
drivers/mtd/nand/raw/davinci_nand.c | 195 +++++-----
drivers/mtd/nand/raw/denali.c | 138 +++----
drivers/mtd/nand/raw/docg4.c | 55 +--
drivers/mtd/nand/raw/fsl_elbc_nand.c | 19 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 19 +-
drivers/mtd/nand/raw/fsmc_nand.c | 148 ++++----
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 56 +--
drivers/mtd/nand/raw/hisi504_nand.c | 78 ++--
drivers/mtd/nand/raw/jz4740_nand.c | 46 ++-
drivers/mtd/nand/raw/jz4780_nand.c | 34 +-
drivers/mtd/nand/raw/lpc32xx_mlc.c | 109 +++---
drivers/mtd/nand/raw/lpc32xx_slc.c | 77 ++--
drivers/mtd/nand/raw/marvell_nand.c | 206 ++++++-----
drivers/mtd/nand/raw/mtk_nand.c | 75 ++--
drivers/mtd/nand/raw/mxc_nand.c | 136 +++----
drivers/mtd/nand/raw/nand_base.c | 121 +++++--
drivers/mtd/nand/raw/nand_micron.c | 6 +-
drivers/mtd/nand/raw/nand_timings.c | 12 +-
drivers/mtd/nand/raw/nandsim.c | 82 +++--
drivers/mtd/nand/raw/omap2.c | 521 +++++++++++++--------------
drivers/mtd/nand/raw/qcom_nandc.c | 71 ++--
drivers/mtd/nand/raw/s3c2410.c | 30 +-
drivers/mtd/nand/raw/sh_flctl.c | 57 ++-
drivers/mtd/nand/raw/sm_common.c | 39 +-
drivers/mtd/nand/raw/sunxi_nand.c | 43 +--
drivers/mtd/nand/raw/tango_nand.c | 40 +-
drivers/mtd/nand/raw/tegra_nand.c | 162 +++++----
drivers/mtd/nand/raw/txx9ndfmc.c | 35 +-
drivers/mtd/nand/raw/vf610_nfc.c | 127 +++----
include/linux/mtd/rawnand.h | 17 +-
include/linux/mtd/sh_flctl.h | 1 +
34 files changed, 1603 insertions(+), 1412 deletions(-)
--
2.14.1
Powered by blists - more mailing lists